DC1722J5005AHF

DC1722J5005AHF Rev D Ultra Low Profile 0805 5 dB Directional Coupler Description: The DC1722J5005AHF is a low cost, low profile sub-miniature high performance 5 dB directional coupler in an easy to use RoHS compliant, Halogen Free surface mount package. It is designed for 1700 – 2200MHz applications including: WCDMA, CDMA, IMT2000, UMTS and GSM1800 / 1900 applications. The DC1722J5005AHF is ideal for power detection, signal injection and other applications where low insertion loss signal monitoring is required. The DC1722J5005AHF is available on tape and reel for pick and place high volume manufacturing. All of the Xinger components are constructed from ceramic filled PTFE composites which possess excellent electrical and mechanical stability. All parts have been subjected to rigorous qualification testing and units are 100% RF tested. Detailed Electrical Specifications: Specifications subject to change without notice. Features: ROOM (25˚C) • • • • 1700 – 2200 MHz • LTE Bands:1,2,3,4,9,10, 33,34,35,36,37,39 • • • • • Mean Coupling 5dB Frequency Ultra Low Insertion Loss (MHz) WCDMA,IMT2000,UMTS, GSM Tape & Reel RoHS Compliant Halogen Free 100% RF Tested -55°C to 140°C Mean Coupling (dB) Insertion loss (dB) Return Loss Directivity (dB) (dB) Phase Balance (deg) Frequency Sensitivity (dB) Power Handling (watts) @85oC Min Typ. Max Typ. Max Typ. Min Typ. Min Typ. Max Typ. Max Max 1700 2200 4.5 5.2 5.6 0.3 0.5 20.6 17.0 20.2 17.0 1.6 4.0 0.07 0.13 5 1805 1880 4.5 5.2 5.6 0.2 0.4 24.0 19.0 24.1 19.0 1.0 3.0 0.02 0.13 5 1930 1990 4.5 5.2 5.6 0.3 0.5 22.7 19.0 22.4 18.0 1.0 3.0 0.00 0.10 5 2110 2170 4.5 5.2 5.6 0.3 0.5 20.9 17.0 20.5 17.0 1.5 4.0 0.03 0.10 5 *Specification based on performance of unit properly installed on microstrip printed circuit boards with 50 Ω nominal impedance. Outline Drawing Top View (Nearside) 2.04±0.10 Bottom View (Farside) 4x 0.37 0.80±0.08 1 2 4x 0.65 3 2x 0.15 1.29±0.10 6x 0.98 Orientation Marker Denotes Pin Location Pin 1 2 3 4 5 6 Orientation Marker Denotes Pin Location Configuration-1 Configuration-2 Configuration-3 Configuration-4 Input GND Isolated Direct GND Coupled Isolated GND Input Coupled GND Direct Direct GND Coupled Input GND Isolated Coupled GND Direct Isolated GND Input 6x 0.22 6 5 4 6x 0.30 Mechanical Outline -Dimensions are in Millimeters -Tolerances are Non-Cumulative 1 DC1722J5005AHF Rev D Typical Performance: 1600 MHz. to 2300 MHz (Configuration 1) Return Loss at Input Port 0 -3 -0.3 -0.6 -9 -0.9 -12 -1.2 -15 -1.5 [dB] [dB] -6 -18 -1.8 -21 -2.1 -24 -2.4 -27 -2.7 -30 -3 -33 -3.3 -36 1.6 1.7 1.8 1.9 2 Freq [GHz] 2.1 2.2 2.3 -3.6 1.6 1.8 -1 2 1.9 Freq [GHz] 2.1 2.2 2.3 2.1 2.2 2.3 Phase Balance 20 15 -2 10 -3 5 [degree] -4 [dB] 1.7 Coupling 0 -5 -6 0 -5 -7 -10 -8 -15 -9 -10 1.6 Insertion Loss 0 1.7 1.8 1.9 2 Freq [GHz] 2.1 2.2 2.3 2.1 2.2 2.3 -20 1.6 1.7 1.8 1.9 2 Freq [GHz] Directivity 0 -3 -6 -9 -12 [dB] -15 -18 -21 -24 -27 -30 -33 -36 1.6 1.7 1.8 1.9 2 Freq [GHz] 2 DC1722J5005AHF Rev D Wideband Performance: 10 to 8010MHz (Configuration 1) Return Loss at Input Port 0 -3 -0.3 -6 -0.6 -9 -0.9 -12 -1.2 -1.5 [dB] [dB] -15 -18 -1.8 -21 -2.1 -24 -2.4 -27 -2.7 -30 -3 -33 -3.3 -36 0.01 1.01 2.01 3.01 4.01 5.01 Freq [GHz] 6.01 7.01 8.01 -3.6 0.01 Coupling 0 2.01 3.01 4.01 5.01 Freq [GHz] 6.01 7.01 8.01 6.01 7.01 8.01 Phase Balance 15 -2 10 -3 5 [degree] -4 [dB] 1.01 20 -1 -5 -6 0 -5 -7 -10 -8 -15 -9 -10 0.01 Insertion Loss 0 1.01 2.01 3.01 4.01 5.01 Freq [GHz] 6.01 7.01 8.01 6.01 7.01 8.01 -20 0.01 1.01 2.01 3.01 4.01 5.01 Freq [GHz] Directivity 0 -3 -6 -9 -12 [dB] -15 -18 -21 -24 -27 -30 -33 -36 0.01 1.01 2.01 3.01 4.01 5.01 Freq [GHz] 3 DC1722J5005AHF Rev D Definition of Measured Specifications Parameter Return Loss Directivity Insertion Loss Mean Coupling Definition The impedance match of the coupler to a 50Ω system. Return Loss is an alternate means to express VSWR. The power at the isolated port divided by the power at the coupled port The input power divided by the sum of the power at the two output ports. At a given frequency ( ωn), Coupling is the input power divided by the power at the coupled port. Mean coupling is the average value of the coupling values in the band. N is the number of frequencies in the band. Phase Balance The difference in phase angle between the two output ports. Frequency sensitivity The decibel difference between the maximum in band coupling value and the minimum in band coupling value. Mathematical Representation Return Loss(dB) = 20log VSWR + 1 VSWR − 1 Directivity(dB) = 10log Insertion Loss(dB) = 10log Piso Pcpl Pin Pcpl + Pdirect Coupling(dB) = C(ωn ) = 10log Mean Coupling(dB) = Pin (ωn ) Pcpl (ωn ) ∑𝑁𝑁 𝑛𝑛=1 𝐶𝐶(𝜔𝜔𝑛𝑛 ) 𝑁𝑁 Phase at coupled port – Phase at direct port (Max Coupling (dB) – Min Coupling (dB))/2 4 DC1722J5005AHF Rev D Mounting Configuration: In order for Xinger surface mount components to work optimally, the proper impedance transmission lines must be used to connect to the RF ports. If this condition is not satisfied, insertion loss, Isolation and VSWR may not meet published specifications. All of the Xinger components are constructed from organic PTFE based composites which possess excellent electrical and mechanical stability. Xinger components are compliant to a variety of ROHS and Green standards and ready for Pb-free soldering processes. Pads are Gold plated with a Nickel barrier. An example of the PCB footprint used in the testing of these parts is shown below. In specific designs, the transmission line widths need to be adjusted to the unique dielectric coefficients and thicknesses as well as varying pick and place equipment tolerances. 5 DC1722J5005AHF Rev D Packaging and Ordering Information Parts are available in reel and are packaged per EIA 481-D. Parts are oriented in tape and reel as shown below. Minimum order quantities are 4000 per reel. 2.00 4.00 .25 1.75 3.50 8.00 2.41 1.00 1.60 4.00 Contact us: rf&s_support@ttm.com 6