DC4759J5020AHF

DC4759J5020AHF Rev H Ultra Low Profile 0805 20dB Directional Coupler Description: The DC4759J5020AHF is a low cost, low profile sub-miniature high performance 20 dB directional coupler in an easy to use RoHS compliant, Halogen Free surface mount package. It is designed for 4700 – 5900MHz applications including: WiFi and P2P / P2MP applications. The DC4759J5020AHF is ideal for power detection, signal injection and other applications where low insertion loss signal monitoring is required. The DC4759J5020AHF is available on tape and reel for pick and place high volume manufacturing. All of the Xinger components are constructed from ceramic filled PTFE composites which possess excellent electrical and mechanical stability. All parts have been subjected to rigorous qualification testing and units are 100% RF tested. Detailed Electrical Specifications: Features: ROOM (25˚C) • 4700 – 5900 MHz • Mean Coupling 20dB • 0.58mm Height Frequency (MHz) Profile Loss Surface Mountable Tape & Reel RoHS Compliant Halogen Free -55°C to 140°C Insertion loss (dB) Return Loss (dB) Min Directivity (dB) Frequency Power Sensitivity Handling (dB) @85oC (watts) Typ. Min Typ. Max Max Min Typ. Max Typ. Max Typ. 4900-5500 18.3 19.4 20.6 0.14 0.27 8.3 6.9 15.4 11.0 0.19 0.21 2 4700-5900 18.6 19.7 21.0 0.17 0.32 7.6 6.3 10.3 5.3 0.91 1.02 2 • Ultra Low Insertion • • • • • Mean Coupling (dB) * Specifications subject to change without notice. **Specification based on performance of unit properly installed on microstrip printed circuit boards with 50 Ω nominal impedance. Outline Drawing: TOP VIEW 2.04±0.10 SIDE VIEW BOTTOM VIEW 4x 0.37 0.55±0.06 1 2 3 2x 0.15 1.29±0.10 6x 0.98 Orientation Marker Denotes Pin Location Orientation Marker Denotes Pin Location Mechanical Outline -Dimensions are in Millimeters Pin 1 2 3 4 5 6 Configuration-1 Direct Isolated Gnd Gnd Coupled Input 6x 0.22 6 4x 0.65 5 4 6x 0.30 Configuration-2 Input Coupled Gnd Gnd Isolated Direct 1 DC4759J5020AHF Rev H Typical Performance: 4600 MHz to 6000 MHz (Configuration 1) Coupling (dB) 0 Directivity (dB) 0 -5 -5 -10 -15 -10 -20 -15 -25 -30 -20 -35 -25 -40 -30 4.6 4.8 5 5.4 5.2 Freq [GHz] 5.6 5.8 6 Return Loss at Input Port (dB) 0 -45 4.6 -5 -10 -10 -15 -15 -20 -20 -25 -25 -30 -30 -35 -35 -40 -40 4.8 5 5.2 5.4 Freq [GHz] 5.6 5.8 6 Return Loss at Isolated Port (dB) 0 -45 4.6 -5 -10 -10 -15 -15 -20 -20 -25 -25 -30 -30 -35 -35 -40 -40 4.8 5 5.2 5.4 Freq [GHz] 5.6 4.8 5.8 6 5.2 5.4 Freq [GHz] 5.6 5.8 6 -45 4.6 5 5.2 5.4 Freq [GHz] 5.6 5.8 6 Return Loss at Coupled Port (dB) 0 -5 -45 4.6 5 Return Loss at Direct Port (dB) 0 -5 -45 4.6 4.8 4.8 5 5.2 5.4 Freq [GHz] 5.6 5.8 6 2 DC4759J5020AHF Rev H Insertion Loss (dB) 0 -0.5 -0.5 -1 -1 -1.5 -1.5 -2 -2 -2.5 -2.5 -3 4.6 4.8 5 5.4 5.2 Freq [GHz] Transmission Loss (dB) 0 5.6 5.8 6 -3 4.6 4.8 5 5.2 5.4 Freq [GHz] 5.6 5.8 6 3 DC4759J5020AHF Rev H Wide Band Performance: 0 to 8500MHz (Configuration 1) Coupling (dB) 0 Directivity (dB) 0 -5 -5 -10 -15 -10 -20 -15 -25 -30 -20 -35 -25 -40 -30 5 4 Freq [GHz] 3 2 1 -45 8 7 6 Return Loss at Input Port (dB) 0 1 -5 -10 -10 -15 -15 -20 -20 -25 -25 -30 -30 -35 -35 -40 -40 3 2 1 8 7 6 5 4 Freq [GHz] Return Loss at Isolated Port (dB) 0 -45 -5 -5 -10 -15 -15 -20 -20 -25 -25 -30 -30 -35 -35 -40 -40 -45 1 2 3 4 5 Freq [GHz] 6 7 8 -45 6 7 8 Return Loss at Direct Port (dB) 1 2 3 4 5 Freq [GHz] 6 7 8 7 8 Return Loss at Coupled Port (dB) 0 -10 5 4 Freq [GHz] 3 0 -5 -45 2 1 2 3 4 5 Freq [GHz] 6 4 DC4759J5020AHF Rev H Insertion Loss (dB) 0 -0.5 -0.5 -1 -1 -1.5 -1.5 -2 -2 -2.5 -2.5 -3 1 2 3 4 5 Freq [GHz] Transmission Loss (dB) 0 6 7 8 -3 1 2 3 4 5 Freq [GHz] 6 7 8 5 DC4759J5020AHF Rev H Definition of Measured Specifications Parameter Return Loss Definition The impedance match of the coupler to a 50Ω system. Return Loss is an alternate means to express VSWR. Directivity The power at the isolated port divided by the power at the coupled port Insertion Loss The input power divided by the sum of the power at the two output ports. At a given frequency (𝜔𝜔𝑐𝑐 ), coupling is the input power divided by the power at the coupled port. Mean Coupling Mean coupling is the average value of the coupling values in the band. N is the number of frequencies in the band. Transmission Loss The input power divided by the power at the direct port Frequency sensitivity The decibel difference between the maximum in band coupling value and the minimum in band coupling value. Mathematical Representation Return Loss(dB) = 20log VSWR + 1 VSWR − 1 Piso Pcpl Pin Insertion Loss(dB) = 10log Pcpl + Pdirect Directivity(dB) = 10log Coupling(dB) = C(ωn ) = 10log Mean Coupling(dB) = Pin (ωn ) Pcpl (ωn ) ∑𝑁𝑁 𝑛𝑛=1 𝐶𝐶(𝜔𝜔𝑛𝑛 ) 𝑁𝑁 Transmission Loss(dB) = 10log Pin Pdirect (Max Coupling (dB) – Min Coupling (dB))/2 *100% RF test is performed on configuration 1 where port 1 is connected to pin 1, port 2 is connected to pin 2, port 3 is connected to pin 5 and port 4 is connected to pin 6. 6 DC4759J5020AHF Rev H Mounting Configuration: In order for Xinger surface mount components to work optimally, the proper impedance transmission lines must be used to connect to the RF ports. If this condition is not satisfied, insertion loss, Isolation and VSWR may not meet published specifications. All of the Xinger components are constructed from organic PTFE based composites which possess excellent electrical and mechanical stability. Xinger components are compliant to a variety of ROHS and Green standards and ready for Pb-free soldering processes. Pads are Gold plated with a Nickel barrier. An example of the PCB footprint used in the testing of these parts is shown below. In specific designs, the transmission line widths need to be adjusted to the unique dielectric coefficients and thicknesses as well as varying pick and place equipment tolerances. .41 .25 Plated thru holes to ground .33 .66 .04 4x Transmission lines Plated thru holes to ground Circuit Pattern Footprint Pad (s) Solder Resist Dimensions are in Millimeters Mounting Footprint 7 DC4759J5020AHF Rev H Packaging and Ordering Information: Parts are available in reel and are packaged per EIA 481-D. Parts are oriented in tape and reel as shown below. Minimum order quantities are 4000 per reel. 2.00 .25 4.00 1.75 3.50 8.00 1.60 4.00 2.41 .81 Direction of Part Feed (Unloading) Contact us: rf&s_support@ttm.com 8