FB3436N5050A00

Model X0060L7575A00 Rev C Ultra Low Profile 0603 RF Crossover Description The (patent pending) X0066L7575A00 is an ultra-small low profile crossover that enables the transition of two intersecting RF traces in an easy to use industry standard SMT package. The 0603 crossover is ideal for any critical applications where layout and available space are a premium and resorting to addition PWB layers and larger overall footprints are unacceptable. With low insertion loss and high isolation packaged with cost in mind, this novel component delivers. Detailed Electrical Specifications*: Specifications subject to change without notice. ROOM (25°C) Features: • • • • • • • • • • 0 – 2500 MHz. 0.7mm Height Profile 75 Ohm RF-RF Crossover All Wireless Frequencies Low Insertion Loss High Isolation Surface Mountable Tape & Reel Non-conductive Surface RoHS Compliant Parameter Frequency Port Impedance Return Loss Insertion Loss Isolation (cross-talk) 0 – 700 MHz 700 - 1700 MHz 1700 - 2500 MHz Power Handling Operating Temperature Min. 0 19 Typ. 75 21 0.1 52 47 43 Max 2500 0.15 Unit MHz Ω dB dB dB dB dB Watts ºC 44 40 38 -55 2 +85 Outline Drawing Top View (Near-side) .027±.002 [0.70±0.05] .029±.004 [0.75±0.10] 1 2 3 .008 [0.20] .020 [0.52] Pin 1 2 3 4 5 6 Designation GND RF 2 In/Out GND RF 1 In/Out RF 2 In/Out RF 1 In/Out 6 5 4 Side View Bottom View (Far-side) .059±.004 [1.50±0.10] .020 [0.50] Orientation Marker Denotes Pin Location .010 [0.24] Dimensions are in Inches [Millimeters] Mechanical Outline Tolerances are Non-Cumulative Available on Tape and Reel for Pick and Place Manufacturing. USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 411-6596 +44 2392-232392 Model X0060L7575A00 Rev C Typical Broadband Performance: 0 GHz. to 3.0 GHz. Return Loss 0 -3 -6 -9 -12 -15 [dB] S12 0 -0.1 -0.2 -0.3 -0.4 [dB] -18 -21 -24 -27 -30 -33 -36 500 1000 1500 2000 2500 3000 -0.5 -0.6 -0.7 -0.8 -0.9 -1 500 1000 1500 2000 2500 3000 Frequency [MHz] Frequency [MHz] Isolation 0 -5 -10 -15 -20 [dB] -25 -30 -35 -40 -45 -50 500 1000 1500 2000 2500 3000 Frequency [MHz] USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 411-6596 +44 2392-232392 Available on Tape and Reel for Pick and Place Manufacturing. Model X0060L7575A00 Rev C Mounting Configuration: In order for Xinger surface mount components to work optimally, the proper impedance transmission lines must be used to connect to the RF ports. If this condition is not satisfied, insertion loss, Isolation and VSWR may not meet published specifications. All of the Xinger components are constructed from ceramic filled PTFE composites which possess excellent electrical and mechanical stability having X and Y thermal coefficient of expansion (CTE) of 17 ppm/oC. An example of the PCB footprint used in the testing of these parts is shown on below. In specific designs, the transmission line widths need to be adjusted to the unique dielectric coefficients and thicknesses as well as varying pick and place equipment tolerances. 6X .011 [0.28] 6X .011 [0.29] 2X .009 [0.22] Plated thru holes to ground .012 [0.31] Part Orientation (Top View) 6X .002 [0.05] Transmission Line Circuit Pattern Footprint Pad (s) Solder Resist Dimensions are in Inches [Millimeters] Mounting Footprint Available on Tape and Reel for Pick and Place Manufacturing. USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 411-6596 +44 2392-232392 Model X0060L7575A00 Rev C Packaging and Ordering Information Parts are available in reel and are packaged per EIA 481-2. Parts are oriented in tape and reel as shown below. Minimum order quantities are 4000 per reel. See Model Numbers below for further ordering information. ØA ØC ØD QUANTITY/REEL 4000 TABLE 1 REEL DIMENSIONS (inches [mm]) ØA 7.00 [177.8] B 0.32 [8.0] ØC 2.0 [50.8] ØD 0.512 [13.0] B USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 411-6596 +44 2392-232392 Available on Tape and Reel for Pick and Place Manufacturing. Model X0060L7575A00 Rev C Available on Tape and Reel for Pick and Place Manufacturing. USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 411-6596 +44 2392-232392