G150N50W4B

ROHS Compliant Model G150N50W4B Flange Mount Termination 150 Watts, 50Ω Description The G150N50W4B is high performance Aluminum Nitride (AlN) flange mount termination intended as a cost competitive alternative to Beryllium Oxide (BeO). The termination is well suited to all cellular frequency bands such as; AMPS, GSM, DCS, PCS, PHS and UMTS. The high power handling makes the part ideal for terminating circulators, and for use in power combiners. The termination is also RoHS compliant! General Specifications Features: • RoHS Compliant • 150 Watts • DC - 2.7 GHz • AlN Ceramic • Non-Nichrome Resistive Element • Low VSWR • 100% Tested Resistive Element Substrate Cover Mounting Flange Thick Film AlN Ceramic Alumina Ceramic Nickel Plated Copper Tolerance is ±0.010”, unless otherwise specified. Designed to meet of exceed applicable portions of MIL-E-5400. All dimensions in inches. Electrical Specifications Resistance Value: Power: Frequency Range: Return Loss 50 Ohms, ± 2% 150 Watts DC – 2.7 GHz > 25 dB to 2.0 GHz > 20 dB to 2.7 GHz Specification based on unit properly installed using suggested mounting instructions and a 50 ohm nominal impedance. Specifications subject to change. Outline Drawing Lead Length: 0.150 Min G150N50W4B (097) rev. D pg. 1 of 2 USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 544-2414 +44 2392-232392 Model G150N50W4B Typical Performance: G150N50W4B G150N50W4B Power De-rating: Mounting Footprint and Procedure: G150N50W4B (097) rev. D pg. 2 of 2 USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 544-2414 +44 2392-232392