PD0922J5075D2

Model PD0922J5075D2 Rev D Ultra Low Profile 0805 Power Divider 50Ω to 75Ω Description The PD0922J5075D2 is a low profile, sub-miniature Wilkinson power divider in an easy to use surface mount package and is ideal for high volume manufacturing while delivering higher performances than traditional printed and lumped element solutions. It has been designed for the following markets: DVB-S, GSM, DCS, PCS, WCDMA, GPS, 802.11a+g, Bluetooth, and Zigbee USA. The PD0922J5075D2 is matched to 50Ω at the input and 75Ω at the outputs and has a height profile of 0.8 mm. A two section Wilkinson design results in increased isolation performance. Two external resistors are required for operation. Components are available on tape and reel for high volume manufacturing pick and place. All Xinger components are constructed from ceramic filled PTFE composites which possess excellent electrical and mechanical stability having X and Y thermal coefficient of expansion (CTE) of 17 ppm/oC. Detailed Electrical Specifications: Specifications subject to change without notice. ROOM (25°C) • • • • • • • • • • • Features: 950 – 2150 MHz 14 dB Isolation (output ports) Good Return Loss 0.8mm Height Profile 50Ω Input/ 75Ω Output External resistors required Low Insertion Loss Surface Mountable Tape & Reel Non-conductive Surface RoHS Compliant Parameter Frequency Input Port Impedance Output Port Impedance Return Loss Insertion Loss* Amplitude Balance Phase Balance Isolation (Output Ports) Power Handling Operating Temperature Min. 950 Typ. 50 75 13 0.5 0.1 1 14 Max 2150 11 0.7 0.3 3 2 +85 12 -55 Unit MHz Ω Ω dB dB dB Degrees dB Watts ºC * Insertion Loss stated at room temperature (Insertion Loss is approximately 0.1 dB higher at +85 ºC) Outline Drawing Top View (Near-side) .079±.004 [2.00±0.10] Side View Bottom View (Far-side) 4X .026 [0.65] .039 [0.98] 1 2 3 6X .009 [0.22] 6 5 6X .012 [0.30] .021±.002 [0.53±0.05] .049±.004 [1.25±0.10] Orientation Marker Denotes Pin Location Orientation Marker Denotes Pin Location Pin 1 2 3 4 5 6 Designation Mid 1 Input Mid 2 Output 1 GND Output 2 4 Dimensions are in Inches [Millimeters] Mechanical Outline Tolerances are Non-Cumulative Available on Tape and Reel for Pick and Place Manufacturing. USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 411-6596 +44 2392-232392 Model PD0922J5075D2 Rev D Typical Broadband Performance: 500 MHz. to 8.0 GHz. Return Loss - Input 0 -3 -6 -9 -12 -15 [dB] [dB] Insertion Loss 0 -3 -6 -9 -12 -15 -18 -21 -24 -27 -30 -33 -36 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 6500 7000 7500 -18 -21 -24 -27 -30 -33 -36 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 6500 7000 7500 8000 Frequency [MHz] Frequency [MHz] Amplitude Balance 2 1.5 1 0.5 [dB] Phase Balance 20 15 10 5 deg 0 -0.5 -1 -1.5 -2 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 6500 7000 7500 8000 0 -5 -10 -15 -20 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 6500 7000 7500 8000 Frequency [MHz] Frequency [MHz] Isolation 0 -3 -6 -9 -12 -15 [dB] -18 -21 -24 -27 -30 -33 -36 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 6500 7000 7500 8000 Frequency [MHz] USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 411-6596 +44 2392-232392 Available on Tape and Reel for Pick and Place Manufacturing. 8000 Model PD0922J5075D2 Rev D Typical Performance: 900 MHz. to 2200 MHz. Return Loss - Input 0 -3 -6 -9 -12 -15 [dB] [dB] Insertion Loss 0.0 -0.3 -0.6 -0.9 -1.2 -1.5 -1.8 -2.1 -2.4 -2.7 -3.0 -3.3 -3.6 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2100 2100 -18 -21 -24 -27 -30 -33 -36 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2100 2200 Frequency [MHz] Frequency [MHz] Amplitude Balance 2 1.5 1 0.5 [dB] Phase Balance 20 15 10 5 deg 0 -0.5 -1 -1.5 -2 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2100 2200 0 -5 -10 -15 -20 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2200 Frequency [MHz] Frequency [MHz] Isolation 0 -3 -6 -9 -12 -15 [dB] -18 -21 -24 -27 -30 -33 -36 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2100 2200 Frequency [MHz] Available on Tape and Reel for Pick and Place Manufacturing. USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 411-6596 +44 2392-232392 2200 Model PD0922J5075D2 Rev D Mounting Configuration: In order for Xinger surface mount components to work optimally, the proper impedance transmission lines must be used to connect to the RF ports. If this condition is not satisfied, insertion loss, Isolation and VSWR may not meet published specifications. All of the Xinger components are constructed from ceramic filled PTFE composites which possess excellent electrical and mechanical stability having X and Y thermal coefficient of expansion (CTE) of 17 ppm/oC. An example of the PCB footprint used in the testing of these parts is shown below. In specific designs, the transmission line widths need to be adjusted to the unique dielectric coefficients and thicknesses as well as varying pick and place equipment tolerances. In addition, since the PD0922J5075D2 is a Wilkinson power divider, external 0402 200Ω resistors must be mounted in locations R1 and R2 respectively, as shown in the Figure below. Pad Footprint w/ 0402 Resistor Locations R1 6X .014 [0.35] 4X .012 [0.30] 6X .013 [0.33] .026 [0.66] 6X .002 [0.05] Plated thru hole to ground R2 Circuit Pattern Footprint Pad (s) Solder Resist Dimensions are in Inches [Millimeters] Mounting Footprint 3X Transmission Line USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 411-6596 +44 2392-232392 Available on Tape and Reel for Pick and Place Manufacturing. Model PD0922J5075D2 Rev D Packaging and Ordering Information Parts are available in reel and are packaged per EIA 481-2. Parts are oriented in tape and reel as shown below. Minimum order quantities are 4000 per reel. See Model Numbers below for further ordering information. ØA ØC ØD QUANTITY/REEL 4000 TABLE 1 REEL DIMENSIONS (inches [mm]) ØA 7.00 [177.8] B 0.32 [8.0] ØC 2.0 [50.8] ØD 0.512 [13.0] B Available on Tape and Reel for Pick and Place Manufacturing. USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 411-6596 +44 2392-232392 Model PD0922J5075D2 Rev D USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 411-6596 +44 2392-232392 Available on Tape and Reel for Pick and Place Manufacturing.