RFP-050100-2X50-2_1

Model RFP-050100-2X50-2 Chip Termination 5 Watts, 50Ω General Specifications Resistive Element Substrate Terminal Finish Operating Temperature Thick film BeO Ceramic Matte Tin over Nickel -55 to +125°C (see chart) Tolerance is ±0.010”, unless otherwise specified. Designed to meet of exceed applicable portions of MIL-E-5400. All dimensions in inches. Electrical Specifications Features: • 5 Watts • Lowest Cost • BeO Ceramic • Non-Nichrome Resistive Element • Low VSWR • 100% Tested Resistance Value: Power: Frequency Range: V.S.W.R.: 50 ohms, ± 2% 5 W atts DC – 4.0 GHz 1.25:1 Specification based on unit properly installed using suggested mounting instructions and a 50 ohm nominal impedance. Tolarence is ±0.010inches. Specifications subject to change without notice Outline Drawing All dimensions are in inches. 050100-2X50-2 (097) Rev B pg. 1 of 2 Available on Tape and Reel For Pick and Place Manufacturing. USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 544-2414 +44 2392-232392 Model RFP-050100-2X50-2 Typical Performance: Power De-rating: Mounting Footprint and Procedure: 050100-2X50-2 (097) Rev B pg. 2 of 2 USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 544-2414 +44 2392-232392 Available on Tape and Reel For Pick and Place Manufacturing.