RFP-100NXXAF

Model RFP-100NXXAF RoHS Compliant Flangeless Attenuators 100 Watts General Specifications Resistive Element Substrate Cover Leads Thick film Aluminum nitride ceramic Alumina ceramic 99% pure silver (.005” thick) Features: • DC – see chart • 100 Watts • Aluminum Nitride Ceramic • Non-Nichrome Resistive Element • Welded Silver Leads • Low VSWR • 100% Tested Electrical Specifications Attenuation Range: Frequency Range; Power: VSWR: 1, 2, 3, 4, 5, 6, 9, 10, 20, 30 db DC – see chart 100 Watts 1.25:1 Tolerance is ±0.010”, unless otherwise specified. Designed to meet of exceed applicable portions of MIL-E-5400. Operating temperature is -55ºC to 150ºC (see chart for derating temperatures). All dimensions in inches. Specifications subject to change with out notice. Outline Drawing 100NXXAF (097) Rev D Available on Tape and Reel For Pick and Place Manufacturing. USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 544-2414 +44 2392-232392 Model RFP-100NXXAF Specifications: RoHS Compliant Mounting Procedure: Power derating: SUGGESTED MOUNTING PROCEDURES: 1. MAKE SURE THAT THE DEVICES ARE MOUNTED ON FLAT SURFACES (.001" UNDER THE DEVICE) TO OPTIMIZE THE HEAT TRANSFER. POSITION DEVICE ON MOUNTING SURFACE AND SOLDER IN PLACE USING AN APPROPRIATE TYPE SOLDER. SOLDER LEADS IN PLACE USING AN APPROPPRIATE TYPE SOLDER WITH A CONTROLLED TEMPERATURE IRON. KEEP LEAD LENGTH AS SHORT AS POSSIBLE USING A SUGGESTED STRESS RELIEF METHOD. 2. 3. 100NXXAF (097) Rev D USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 544-2414 +44 2392-232392 Available on Tape and Reel For Pick and Place Manufacturing.