RFP-250375-4Y100-2

Model RFP-250375-4Y100-2 Surface Mount Resistors 10 Watts, 100 Ω Surface Mount Resistors General Specifications Resistive Element: Substrate: Terminals: Thick film Beryllium oxide ceramic Thick film silver Electrical Specifications Features • DC - 2.0 GHz • 10 Watts • BeO Ceramic • Non-Nichrome Resistive Element • Low Capacitance • 100% Tested Resistance Value: Frequency Range: Power: Capacitance: 100 ohms, ±2% DC - 2.0 GHz 10 Watts 1.4 pF Notes: Tolerance is ±.010, unless otherwise specified. Operating temperature is -55°C to +125°C (see chart). Designed to meet or exceed applicable portions of MIL-E-5400. All dimensions are in inches. Specifications subject to change without notice. Outline Drawing Note: XXX denotes value VER. 12/5/01 Available on Tape and Reel for Pick and Place Manufacturing. Sales Desk USA: Voice: (800) 544-2414 Fax: (315) 432-9121 Sales Desk Europe: Voice: (+44) 23 92 232392 Fax: (+44) 23 92 251369 1 Model RFP-250375-4Y100-2 Surface Mount Resistors 2 Typical Performance Power Derating Suggested Mounting Procedures 1. Make sure that the devices are mounted on flat surfaces (.001” under the device) to optimize the heat transfer. 2. Position device on mounting surface and solder in place using a 60/40 type or an SN63 type solder. Available on Tape and Reel for Pick and Place Manufacturing. Sales Desk USA: Voice: (800) 544-2414 Fax: (315) 432-9121 Sales Desk Europe: Voice: (+44) 23 92 232392 Fax: (+44) 23 92 251369