APL108533GCTUL

APL1085 3A Low Dropout Fast Response Positive Adjustable Regulator and Fixed 3.3V Features • • • • • • • • Fast Transient Response Guaranteed Dropout Voltage at Multiple Currents Load Regulation : 0.05% Typ. Line Regulation : 0.03% Typ. Low Dropout Voltage : 1.2V Typ. at IOUT =3A Trimmed Current Limit : 3A Typ. at TJ=125 °C On-Chip Thermal Limiting : 150 °C Typ. Standard 3-pin TO-220 , TO-252 and TO-263 Power Package General Description The APL1085 is a low dropout three-terminal adjustable regulator with 3A output current capability. In order to obtain lower dropout voltage and faster transient response, which is critical for low voltage applications, the APL1085 has been optimized. The output available voltage range of adjustable version is from 1.25~5.75V with an input supply below 7V , and the fixed 3.3V output voltage device is also available. Current limit is trimmed to ensure specified output current and controlled short-circuit current. On-chip thermal limiting provides protection against any combination of overload that would create excessive junction temperatures. The APL1085 is available in both the through-hole and surface mount versions of the industry standard Applications • • • • • PentiumTM Processor Supplies PowerPC TM Pin Description 3 TAB is VOUT Supplies VIN VOUT ADJ 2 1 Low Voltage Logic Supplies Battery-Powered Circuitry Post Regulator for Switching Power Supply Front View APL1085 TO-220 Package 3 V IN V OUT AD J TA B is V OU T 2 1 Front View APL1085 TO-252 Package 3 TA B is V OU T V IN V OUT AD J 2 1 Front View APL1085 TO-263 Package ANPEC reserves the right to make changes to improve reliability or manufacturability without notice, and advise customers to obtain the latest version of relevant information to verify before placing orders. Copyright  ANPEC Electronics Corp. Rev. B.5 - Jun., 2003 1 www.anpec.com.tw APL1085 Ordering Information APL1085 L e a d F re e C o d e H a n d li n g C o d e Tem p. R ange Package C ode V o lt a g e C o d e Package C ode F : T O -2 2 0 U : T O -2 5 2 Tem p. R ange C : 0 t o 7 0 °C H a n d li n g C o d e TU : Tube V o lt a g e C o d e : 3 3 : 3 .3 V L e a d F re e C o d e L : L e a d F r e e D e v ic e 33 AP L1085 XXXXX G : T O -2 6 3 TR : Tape & Reel B la n k : A d ju s t a b l e V e r s io n B l a n k : O r ig i n a l D e v ic e AP L1085: AP L1085 XXXXX XXXXX - D a te C o d e A P L 1 0 8 5 -3 3 : XXXXX - D a te C o d e Absolute Maximum Ratings Symbol VI TJ Parameter Input Voltage Operating Junction Temperature Range Control Section Power Transistor Storage Temperature Range Lead Temperature (Soldering, 10 second) Rating 7 0 to 125 0 to 150 -65 to +150 260 Unit V °C TSTG TL °C °C Electrical Characteristics Symbol VREF VOUT REGLINE Parameter Test Conditions APL1085 Unit Min. Typ. Max. 1.225(-2%) 1.250 1.275(+2%) V V % REGLOAD VD ILIMIT IADJ Reference Voltage 1.5V≤(VIN -VOUT) ≤5.75V, 10mA≤ IOUT ≤3A, TJ =0~125°C Output Voltage 10mA≤ IOUT ≤ 3A, 4.75V≤VIN ≤7V, 3.235(-2%) 3.300 3.365(+2%) APL1085-3.3 TJ =0~125 °C 0.03 0.2 Line Regulation TJ =0~125 °C, (Notes 1) APL1085 2.75V≤VIN ≤7V, IOUT=10mA, APL1085-3.3 4.75V≤VIN ≤7V, IOUT=0mA , Load Regulation TJ=25°C, (Notes 1) APL1085 (VIN -VOUT)=3V, 10mA≤ IOUT ≤ 3A 0.05 0.3 APL1085-3.3 VI N=5V, 0mA≤ IOUT ≤ 3A 0.05 0.5 Dropout Voltage 1.3 1.4 ∆VREF=1% ,IOUT=3A ,TJ =0~125°C Current Limit 4.5 6.0 (VIN -VOUT)=1.7V, TJ=25°C 3.5 5.0 TJ=125°C 5.0 6.5 TJ=25°C (VIN -VOUT)=3V, 4.0 5.5 TJ=125°C 60 120 Adjust Pin Current (VIN -VOUT)=3V, IOUT=10mA, TJ=0∼125°C 2 % V A µA Copyright  ANPEC Electronics Corp. Rev. B.5 - Jun, 2003 www.anpec.com.tw APL1085 Electrical Characteristics Cont. Symbol ∆IADJ Parameter Test Conditions Min. Adjust Pin Current 1.5V≤( VIN -VOUT)≤5.75V, Change APL1085 10mA≤ IOUT≤ 3A ILMIN Minimum Load 1.5V≤( VIN -VOUT)≤5.75V, Current APL1085 TJ=0∼125°C IQ Quiescent Current VI N=5V APL1085-3.3 PSRR Ripple Rejection F=120Hz, Cout=22µF, Tant. , (VIN -VOUT)=3V, IOUT=3A LS Long -Term TJ =125°C,1000Hrs. Stability VN RMS Output TJ=25°C,10Hz? F? 10kHz Noise(% of VOUT) Control Circuitry/Power Thermal θJC Transistor Resistance Junction to Case APL1085 Typ. 0.2 2 8 60 0.03 0.003 0.7/3.0 1.0 Unit Max. 5 10 13 µA mA mA dB % % °C/ W NOTE 1: See thermal regulation specifications for changes in output voltage due to heating effects. Load and line regulations are measured at a constant junction temperature by low duty cycle pulse testing. Application Circuits Typical Regulator VIN (2.75V~7V) APL1085 10µ F + C1 + VOUT (1.250V/ 3A) Solid Tantalum C2* 5V to 3.3V Regulator VIN (5V) 10µ F C1 APL1085 + R1 + VOUT (3.3V/ 3A) Solid Tantalum C2* R2 *Required for stability APL1085:C2=10µF * R1 is typically in range of 100Ω to 120Ω R1/(R1+R2)=1.250V/3.3V Copyright  ANPEC Electronics Corp. Rev. B.5 - Jun, 2003 3 www.anpec.com.tw APL1085 Typical Characteristics Dropout Voltage vs Output Current 1.5 1.3 1.2 1.1 1.0 0.9 0.8 0.7 0.6 0.5 0 0.5 1 1.5 2 2.5 3 Short-Circuit Current vs Temperature 14 Shout- Circuit Current (A) 1.4 13 12 11 10 9 8 7 6 5 4 -50 VIN-VOUT (SHORT CIRCUIT) =5V Dropout Voltage (V) TJ= -50°C TJ= 25°C TJ=0°C TJ=125°C VIN-VOUT(SHORT CIRCUIT) =3.3V 0 50 100 150 Output Current (A) Temperature (°C) Load Regulation vs Temperature 0.10 ∆ I =3A Reference Voltage vs Temperature 1.275 1.270 1.265 Output Voltage Deviation (%) 0.05 Reference Voltage (V) 0.0 -0.05 -0.10 -0.15 -0.20 -50 0 50 100 150 1.260 1.255 1.250 1.245 1.240 1.235 1.230 1.225 -50 0 50 100 150 Temperature (°C) Temperature (°C) Copyright  ANPEC Electronics Corp. Rev. B.5 - Jun, 2003 4 www.anpec.com.tw APL1085 Typical Characteristics (Cont.) Minimum Load Current vs Temperature 5 100 90 Adjust Pin Current vs Temperature Minimum Load Current (mA) Adjust Pin Current (µA) 4 3 2 1 0 -50 80 70 60 50 40 30 20 10 0 -50 0 50 100 150 0 50 100 150 Temperature (°C) Temperature (°C) Ripple Rejection vs Frequency 90 80 70 60 20 18 16 14 12 Maximum Power Dissipation* Ripple Rejection (dB) 40 30 20 10 0 VIN-VOUT = 3V VRIPPLE(p-p) = 1V IOUT = 3A 100 1k 10k 100k Power (W) 50 10 8 6 4 2 0 50 70 90 110 130 150 10 Frequency (Hz) Case Temperature (°C) * as Limited by Maximum Jcnction Temperature Copyright  ANPEC Electronics Corp. Rev. B.5 - Jun, 2003 5 www.anpec.com.tw APL1085 Package Information TO-220 ( Reference JEDEC Registration TO-220) D Q R b E e b1 e1 L1 H1 A F L c J1 Dim A b1 b c D e e1 E F H1 J1 L L1 R Q Millimeters Min. 3.56 1.14 0.51 0.31 14.23 2.29 4.83 9.65 0.51 5.84 2.03 12.7 3.65 3.53 2.54 Max. 4.83 1.78 1.14 1.14 16.51 2.79 5.33 10.67 1.40 6.86 2.92 14.73 6.35 4.09 3.43 Min. 0.140 0.045 0.020 0.012 0.560 0.090 0.190 0.380 0.020 0.230 0.080 0.500 0.143 0.139 0.100 Inches Max. 0.190 0.070 0.045 0.045 0.650 0.110 0.210 0.420 0.055 0.270 0.115 0.580 0.250 0.161 0.135 Copyright  ANPEC Electronics Corp. Rev. B.5 - Jun, 2003 6 www.anpec.com.tw APL1085 Package Information TO-252( Reference JEDEC Registration TO-252) E b2 L2 A C1 D H L1 L b e1 D1 C A1 E1 Dim A A1 b b2 C C1 D D1 E E1 e1 H L L1 L2 M illim et er s M in. 2. 1 8 0. 8 9 0. 5 08 5. 2 07 0. 4 6 0. 4 6 5. 3 34 5. 2 R EF 6. 3 5 5. 3 R EF 3. 9 6 9. 3 98 0. 5 1 0. 6 4 0. 8 9 1. 0 2 2. 0 32 7 Inc he s M ax. 2. 3 9 1. 2 7 0. 8 9 5. 4 61 0. 5 8 0. 5 8 6. 2 2 6. 7 3 5. 1 8 10 . 41 M in. 0. 0 86 0. 0 35 0. 0 20 0. 2 05 0. 0 18 0. 0 18 0. 2 10 0. 2 05 R EF 0. 2 50 0. 2 09 R EF 0. 1 56 0. 3 70 0. 0 20 0. 0 25 0. 0 35 0. 0 40 0. 0 80 www.anpec.com.tw M ax. 0. 0 94 0. 0 50 0. 0 35 0. 2 15 0. 0 23 0. 0 23 0. 2 45 0. 2 65 0. 2 04 0. 4 10 Copyright  ANPEC Electronics Corp. Rev. B.5 - Jun, 2003 APL1085 Package Information TO-263 E L2 A c2 D L L3 L1 e b2 b c M illimeters Dim A b b2 c c2 D E e L L1 L2 L3 M in. 4.06 0.51 1.14 1.14 8.64 9.66 14.60 2.24 1.20 M ax. 4.83 0.992 1.399 1.40 9.65 10.299 15.88 2.8 4 2.92 1.78 M in. 0.160 0 .0 2 0.045 0 .0 4 5 0.340 0.380 0.575 0 .090 0.050 Inches M ax. 0.190 0 .039 0.055 0 .055 0.380 0.405 0.625 0 .11 0 0.115 0.070 0.38 TYP. 0.015 TYP. 2.543 BSC. 0.100 BSC. Copyright  ANPEC Electronics Corp. Rev. B.5 - Jun, 2003 8 www.anpec.com.tw APL1085 Physical Specifications Terminal Material Lead Solderability Solder-Plated Copper (Solder Material : 90/10 or 63/37 SnPb), 100%Sn Meets EIA Specification RSI86-91, ANSI/J-STD-002 Category 3. Reflow Condition TP (IR/Convection or VPR Reflow) tp Ram p-up Critical Zone T L to T P Temperature TL Tsm ax tL Tsm in Ram p-down ts Preheat 25 t 25 °C to Peak Tim e Classificatin Reflow Profiles Profile Feature Average ramp-up rate (TL to TP) Preheat - Temperature Min (Tsmin) - Temperature Max (Tsmax) - Time (min to max) (ts) Time maintained above: - Temperature (TL) - Time (tL) Peak/Classificatioon Temperature (Tp) Time within 5°C of actual Peak Temperature (tp) Ramp-down Rate Sn-Pb Eutectic Assembly 3°C/second max. 100°C 150°C 60-120 seconds 183°C 60-150 seconds See table 1 10-30 seconds Pb-Free Assembly 3°C/second max. 150°C 200°C 60-180 seconds 217°C 60-150 seconds See table 2 20-40 seconds 6°C/second max. 6°C/second max. 6 minutes max. 8 minutes max. Time 25°C to Peak Temperature Notes: All temperatures refer to topside of the package .Measured on the body surface. Copyright  ANPEC Electronics Corp. Rev. B.5 - Jun, 2003 9 www.anpec.com.tw APL1085 Classificatin Reflow Profiles(Cont.) T able 1. SnPb Entectic Process – Package Peak Reflow Tem peratures 3 3 P ackage Thickness Volum e m m Volum e m m < 350 ≥ 350 < 2.5 m m 240 +0/-5 ° C 225 +0/-5 ° C ≥ 2.5 m m 225 +0/-5 ° C 225 +0/-5 ° C Table 2. Pb-free Process – Package Classification Reflow Tem peratures 3 3 3 P ackage Thickness Volum e mm Volum e mm Volum e mm < 350 3 50-2000 > 2000 < 1.6 m m 260 +0 ° C* 260 +0 ° C* 260 +0 ° C* 1 .6 m m – 2.5 m m 260 +0 ° C* 250 +0 ° C* 245 +0 ° C* ≥ 2.5 m m 250 +0 ° C* 245 +0 ° C* 245 +0 ° C* * Tolerance: The device m anufacturer/supplier s hall a ssure process com patibility up to and including the stated classification tem perature (this m eans Peak reflow tem perature +0 ° C. For exam ple 260 ° C+0 ° C) at the rated MSL level. Reliability Test Program Test item S OLDERABILITY H OLT P CT T ST E SD Latch-Up Method MIL-STD-883D-2003 MIL-STD-883D-1005.7 JESD-22-B,A102 MIL-STD-883D-1011.9 MIL-STD-883D-3015.7 JESD 78 Description 245 °C, 5 SEC 1000 Hrs Bias @125°C 168 Hrs, 100% RH, 121°C -65°C~150°C, 200 Cycles VHBM > 2KV, VMM > 200V 10ms, 1 tr > 100mA Carrier Tape & Reel Dimension t E Po P P1 D W F Bo Ao D1 Ko Copyright  ANPEC Electronics Corp. Rev. B.5 - Jun, 2003 10 www.anpec.com.tw APL1085 Carrier Tape & Reel Dimension(Cont.) T2 J C A B T1 Application A 330 ±3 TO-252 F 7.5 ± 0.1 Application A 380 ±3 TO-263 F 11.5 ± 0.1 B 100 ± 2 D 1.5 +0.1 B 80 ± 2 D 1.5 +0.1 C 13 ± 0. 5 D1 1.5± 0.25 C 13 ± 0. 5 D1 1.5± 0.25 J 2 ± 0.5 Po 4.0 ± 0.1 J 2 ± 0.5 Po 4.0 ± 0.1 T1 T2 16.4 + 0.3 2.5± 0.5 -0.2 P1 2.0 ± 0.1 T1 24 ± 4 P1 Ao W 16+ 0.3 - 0.1 Bo P 8 ± 0.1 Ko E 1.75± 0.1 t 0.3±0.05 E 1.75± 0.1 t 6.8 ± 0.1 10.4± 0.1 2.5± 0.1 T2 2± 0.3 Ao W 24 + 0.3 - 0.1 Bo P 16 ± 0.1 Ko 2.0 ± 0.1 10.8 ± 0.1 16.1± 0.1 5.2± 0.1 0.35±0.013 (mm) Cover Tape Dimensions Application TO- 252 TO- 263 Carrier Width 16 24 Cover Tape Width 13.3 21.3 Devices Per Reel 2500 1000 Customer Service Anpec Electronics Corp. Head Office : 5F, No. 2 Li-Hsin Road, SBIP, Hsin-Chu, Taiwan, R.O.C. Tel : 886-3-5642000 Fax : 886-3-5642050 Taipei Branch : 7F, No. 137, Lane 235, Pac Chiao Rd., Hsin Tien City, Taipei Hsien, Taiwan, R. O. C. Tel : 886-2-89191368 Fax : 886-2-89191369 Copyright  ANPEC Electronics Corp. Rev. B.5 - Jun, 2003 11 www.anpec.com.tw