APL1087R-25EC-TR

APL1087R 800mA Low Dropout Fast Response Positive Adjustable Regulator and Fixed 1.8V, 2.5V and 3.3V Features • • • • • • • • • • Guaranteed Output Voltage Accuracy within 2% Fast Transient Response Guaranteed Dropout Voltage at Multiple Currents Load Regulation : 0.6% Typ. Line Regulation : 0.03% Typ. Low Dropout Voltage : 1.3V Typ. at IOUT =500mA Current Limit : 0.8A Min. at TJ=125°C On-Chip Thermal Limiting : 150 °C Typ. Adjustable Output : 1.25~7.15V Standard 3-pin SOT-89 and TO-92 Power Packages. General Description The APL1087R is a low dropout three-terminal adjustable regulators with 0.8A output current capability. In order to obtain lower dropout voltage and faster transient response, which is critical for low voltage applications , the APL1087R has been optimized. The device is available in an adjustable version and fixed output voltages of 1.8V, 2.5V and 3.3V, the output available voltage range is from 1.25~7.15V with an input supply below 9V. Dropout voltage is guaranteed at a maximum of 1.45V at 0.5A. Current limit is trimmed to ensure specified output current and controlled short-circuit current. On-chip thermal limiting provides protection against any combination of overload that would create excessive junction temperatures. The APL1087R is available in the industry standard 3-pin SOT-89 and TO-92 power packages. Applications • • • • • • • Voltage Regulator for CD-ROM Drivers Voltage Regulator for LAN Cards Voltage Regulator for mother Boards Wireless Communication Systems Portable Instrument Portable Consumer Equipment Low Voltage Systems Pin Description V IN A P L 10 8 7 R 1 A D J /G N D 2 V IN 3 V OUT SOT-89 (Front View) VOUT V IN AD J/G N D TO-92 (Top View) ANPEC reserves the right to make changes to improve reliability or manufacturability without notice, and advise customers to obtain the latest version of relevant information to verify before placing orders. Copyright  ANPEC Electronics Corp. Rev. A.2 - Apr., 2003 1 www.anpec.com.tw 7 APL1087R Ordering and Marking Information APL1087R L e a d F re e C o d e H a n d l in g C o d e Tem p. R ange P ackage Code V o lt a g e C o d e P ackage Code D : S O T -8 9 E : T O -9 2 Tem p. R ange C : 0 to 7 0 ° C H a n d l in g C o d e TU : Tube TR : Tape & Reel V o lt a g e C o d e 1 8 : 1 .8 V 2 5 : 2 .5 V 3 3 : 3 .3 V B la n k : A d ju s ta b le V e r s io n L e a d F r e e D e v ic e L : L e a d F r e e D e v ic e B l a n k : O r ig in a l D e v ic e A P L 1 0 8 7 R D /E : A PL1087R XXXXX XXXXX - D a te C o d e A P L 1 0 8 7 R -1 8 D /E : A PL1087R XXXXX18 XXXXX - D a te C o d e A P L 1 0 8 7 R -2 5 D /E : A PL1087R XXXXX25 XXXXX - D a te C o d e A P L 1 0 8 7 R -3 3 D /E : A PL1087R XXXXX33 XXXXX - D a te C o d e Absolute Maximum Ratings Symbol VI TJ Parameter Input Voltage Operating Junction Temperature Range Control Section Power Transistor Storage Temperature Range Lead Temperature (Soldering, 10 second) Thermal Resistance from Junction to Ambient in Free Air SOT-89 TO-92 Rating 9 0 to 125 0 to 150 -65 to +150 260 180 180 Unit V °C TSTG TL θJA °C °C °C/W Copyright  ANPEC Electronics Corp. Rev. A.2 - Apr., 2003 2 www.anpec.com.tw APL1087R Electrical Characteristics Symbol V REF Parameter Reference Voltage Output Voltage Test Conditions 10mA ≤ IOUT ≤ 0.5A, 3.1V ≤ V IN≤ 9V, T J = 0~125 °C APL1087R Min. Typ. Max. 1.225 1.250 1.275 Unit V V OUT T J = 0~125 °C, APL1087R-18 0 ≤ I ≤ 0 .5A, 3.25V ≤ V ≤ 9V, OUT IN T J = 0~125 °C, APL1087R-25 0 ≤ IOUT≤ 0 .5A, 3.95V ≤ V IN≤ 9V, T = 0~125 °C, APL1087R-33 J 0 ≤ IOUT≤ 0 .5A, 4.75V ≤ V IN≤ 9V, T J = 0~125 °C IOUT= 10mA, 3.1V ≤ V IN ≤ 9V, (note1) IOUT= 0mA, 3.25V ≤ V IN≤ 9V, (note1) IOUT= 0A, 3.95V≤ V IN≤ 9V, (note 1) IOUT= 0A, 4.75V≤ V IN ≤ 9 V, (note 1) T J = 0~125 °C (V IN – VOUT)=3V, 0≤ IOUT ≤ 0.5A ,(note 1) V IN=3.25V, 0≤ IOUT ≤ 0.5A ,(note 1) V IN=3.95V, 0≤ IOUT ≤ 0.5A ,(note 1) V IN=4.75V, 0≤ IOUT ≤ 0.5A ,(note 1) IOUT=0.5A ,T J = 0~125 °C (V IN -VOUT)=5V, T J=25 ° C 1.764 1.800 1.836 2.450 2.500 2.550 3.235 3.300 3.365 0.03 1 1 1 0.2 6 6 6 % mV V REG LINE Line Regulation APL1087R APL1087R-18 APL1087R-25 APL1087R-33 Load Regulation APL1087R APL1087R-18 APL1087R-25 APL1087R-33 Dropout Voltage Current Limit REG LOAD 0.4 0.6 % VD ILIMIT IADJ ∆ IADJ 1.3 800 60 0.2 1.7 60 75 0.01 0.5 0.3 0.003 150 5.5 5.5 5.5 1.45 120 5 V mA µA µA mA dB Adjust Pin Current (V IN -VOUT)=3V, IOUT=10mA, TJ=0~125 °C Adjust Pin Current T J= 0~125°C, 10mA ≤ IOUT ≤ 0.5A, Change 1.45V ≤ V IN -V OUT≤7.55V Minimum Load IO T J=0~125 °C, V IN = 9V, (note 3) Current F RIPPLE=120Hz, V RIPPLE =1V P-P, PSRR Ripple Rejection (V IN -VOUT)=3V, TJ =0~125°C Thermal TR T J=25 ° C, 30ms Pulse Regulation Temperature TS Stability Long -Term LS T J = 125° C,1000Hrs. Stability RMS Output VN T J=25 ° C,10Hz ≤F ≤ 10kHz, (% of V OUT) Noise Over Temperature OT Point Quiescent Current T J=0~125 °C, APL1087R-18 V IN≤ 9V APL1087R-25 V IN≤ 9V APL1087R-33 V ≤ 9V IN Copyright  ANPEC Electronics Corp. Rev. A.2 - Apr., 2003 3 0.02 %/ W % % % °C 10 10 10 mA www.anpec.com.tw APL1087R Electrical Characteristics (Cont.) Note 1: See thermal regulation specifications for changes in output voltage due to heating effects. Load line regulations are measured at a constant junction temperature by low duty cycle pulse testing. Note 2: Dropout voltage is specified over the full output current range of the device. Dropout voltage is defined as the minimum input/ output differential measured at the specified output current. Test points and limits are also shown on the Dropout Voltage curve. Note 3: Minimum load current is defined as the minimum output current required to maintain regulation. Application Circuits 1.25V to 7.15V Adjustable Regulator Improving Ripple Rejection A P L108 7R V IN IN ADJ OUT R1 12 1 Ω + 10µF C* 1 APL1087R V OUT V IN 10µF IN + OUT ADJ V OUT R1 150 µ F R2 + C* 3 + R2 100µF C* 2 10µF * Needed if device is far from filter capacitors VOUT = 1.250V× R1+ R2 R1 * C3 improves ripple rejection. XC should be approximately equal to R1 at ripple frequency 5V Regulator with Shutdown A P L1087R V IN + 10µ F IN O UT ADJ 5V 121 Ω 1% + 365 Ω 1% 1k TTL 1k 100µ F Copyright  ANPEC Electronics Corp. Rev. A.2 - Apr., 2003 4 www.anpec.com.tw APL1087R Typical Characteristics Load Transient Response 10 3.5 3 50 Line Transient Response 7 Output Voltage Deviation (mV) 5 0 -5 -10 -15 -20 -25 -30 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 Output Voltage Deviation (mV) VOUT=1.25V 40 6 Output Current (A) 2.5 2 1.5 1 0.5 0 30 5 20 4 10 3 0 2 -10 1 -0.5 -20 0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 2 0 Time (µs) Time (µs) Adjust Pin Current vs. Temperature 62 940 920 Current Limit vs. Temperature Adjust Pin Current (µA) 61 60 Current Limit (mA) 900 880 860 840 59 58 V IN= 5 V 820 800 780 760 57 56 55 -50 0 50 100 150 -50 0 50 100 150 Temperature (°C) Temperature(°C) Copyright  ANPEC Electronics Corp. Rev. A.2 - Apr., 2003 5 www.anpec.com.tw Input Voltage (V) APL1087R Typical Characteristics (Cont.) Dropout Voltage vs. Temperature 1.5 1.45 Reference Voltage vs. Temperature 1.255 1.25 1.245 1.24 1.235 1.23 1.225 Drpout Voltage (V) 1.4 1.35 I O U T= 5 0 0 m A 1.3 1.25 1.2 1.15 1.1 1.05 1 -50 -25 0 25 50 75 100 125 150 Reference Voltage (V) 1.22 -50 -25 0 25 50 75 100 125 150 Temperature (°C) Temperature (°C) Output Voltage vs. Temperature 2.6 2.5 2.4 3.4 Output Voltage vs. Temperature Output Voltage (V) 2.3 2.2 2.1 2 1.9 1.8 1.7 1.6 -50 Output Voltage (V) 3.3 3.2 3.1 3 -50 -25 0 25 50 75 100 125 -25 0 25 50 75 100 125 Temperature (°C) Temperature (°C) Copyright  ANPEC Electronics Corp. Rev. A.2 - Apr., 2003 6 www.anpec.com.tw APL1087R Typical Characteristics (Cont.) Output Voltage vs. Input Voltage 3.5 Current Limit vs. Input Voltage 940 930 920 3 Output Voltage (V) 2.5 Current Limit (mA) 0 1 2 3 4 5 6 7 8 9 910 900 890 880 870 860 850 840 2 1.5 1 0.5 0 830 4 5 6 7 8 9 Input Voltage (V) Input Voltage (V) Load Regulation vs. Output Current 8 1.8 Dropout Voltage vs. Output Current VOUT=1.25V 7 1.6 Load Regulation(mV) 6 5 4 3 2 1 0 100 200 300 400 500 600 700 800 Dropout Voltage (V) 1.4 1.2 1 V I N =5V 0.8 0.6 0.4 0 200 400 600 800 Output Current (mA) Output Current (mA) Copyright  ANPEC Electronics Corp. Rev. A.2 - Apr., 2003 7 www.anpec.com.tw APL1087R Package Information SOT-89 (Reference EIAJ ED-7500A Reg stration SC-62) D D1 a E H 1 2 3 L B1 B e e1 C A a D im A B B1 C D D1 e e1 E H L α M illim eters M in. 1.40 0.40 0.35 0.35 4.40 1.35 1.50 B SC 3.00 B SC 2.29 3.75 0.80 2.60 4.25 1.20 10 ° 0.090 0.148 0.031 M ax. 1.60 0.56 0.48 0.44 4.60 1.83 M in. 0.055 0.016 0.014 0.014 0.173 0.053 Inches M ax. 0.063 0.022 0.019 0.017 0.181 0.072 0.059 BSC 0.118 B SC 0.102 0.167 0.047 10 ° Copyright  ANPEC Electronics Corp. Rev. A.2 - Apr., 2003 8 www.anpec.com.tw APL1087R Package Information TO-92 3 J e e1 2 1 L1 Q A L2 L SEATING PLANE E b2 S D b S Dim A φb φ b2 φD E e e1 J L L1 L2 Q S Millimeters Min. Max. 4.58 0.41 0.41 4.96 3.94 2.42 1.15 3.43 12.70 1.27 6.35 2.93 2.42 2.66 5.33 0.53 0.48 5.20 4.19 2.66 1.39 Inches Min. 0.170 0.160 0.160 0.175 0.125 0.095 0.045 0.135 0.500 0.050 0.250 0 . 11 5 0.080 0.105 Max. 0.210 0.021 0.019 0.205 0.165 0.105 0.055 Copyright  ANPEC Electronics Corp. Rev. A.2 - Apr., 2003 9 www.anpec.com.tw APL1087R Physical Specifications Terminal Material Lead Solderability Solder-Plated Copper (Solder Material : 90/10 or 63/37 SnPb), 100%Sn Meets EIA Specification RSI86-91, ANSI/J-STD-002 Category 3. Reflow Condition TP (IR/Convection or VPR Reflow) tp C ritical Z one T L to T P R am p-up T e m p e ra tu re TL T sm ax tL T sm in R am p-down ts Preheat 25 t 25 °C to Peak T im e Classificatin Reflow Profiles Profile Feature Sn-Pb Eutectic Assembly Large Body Small Body Pb-Free Assembly Large Body Small Body 3°C/second max. 150°C 200°C 60-180 seconds 3°C/second max 217°C 60-150 seconds 245 +0/-5°C 250 +0/-5°C 10-30 seconds 20-40 seconds 6°C/second max. 8 minutes max. www.anpec.com.tw Average ramp-up rate 3°C/second max. (TL to TP) Preheat - Temperature Min (Tsmin) 100°C - Temperature Mix (Tsmax) 150°C - Time (min to max)(ts) 60-120 seconds Tsmax to TL - Ramp-up Rate Tsmax to TL - Temperature(TL) 183°C - Time (tL) 60-150 seconds Peak Temperature(Tp) 225 +0/-5°C 240 +0/-5°C Time within 5°C of actual Peak 10-30 seconds 10-30 seconds Temperature(tp) Ramp-down Rate 6°C/second max. 6 minutes max. Time 25°C to Peak Temperature Copyright  ANPEC Electronics Corp. Rev. A.2 - Apr., 2003 10 Note: All temperatures refer to topside of the package. Measured on the body surface. 10 APL1087R Reliability Test Program Test item S OLDERABILITY H OLT P CT T ST E SD Latch-Up Method MIL-STD-883D-2003 MIL-STD-883D-1005.7 JESD-22-B,A102 MIL-STD-883D-1011.9 MIL-STD-883D-3015.7 JESD 78 Description 245 °C, 5 SEC 1000 Hrs Bias @125°C 168 Hrs, 100% RH, 121°C -65 °C~150°C, 200 Cycles VHBM > 2KV, VMM > 200V 10ms, 1tr > 100mA Carrier Tape & Reel Dimensions t E Po P P1 D F W Bo Ao D1 T2 Ko J C A B T1 Application SOT-89 Application SOT-89 A 178 ±1 F 5.5 ± 0.05 B 70 ± 2 D 1.5± 0.1 C J T1 14 ± 2 P1 2.0 ± 0.1 T2 1.3 ± 0.3 Ao 4.8 ± 0.1 13.5 ± 0.15 3 ± 0.15 D1 1.5± 0.1 Po 4.0 ± 0.1 W 12 + 0.3 12 - 0.1 Bo 4.5± 0.1 P 8 ± 0.1 Ko E 1.75± 0.1 t 1.80± 0.1 0.3±0.013 (mm) Copyright  ANPEC Electronics Corp. Rev. A.2 - Apr., 2003 11 www.anpec.com.tw APL1087R Cover Tape Dimensions Application SOT- 89 Carrier Width 12 Cover Tape Width 9.3 Devices Per Reel 1000 Customer Service Anpec Electronics Corp. Head Office : 5F, No. 2 Li-Hsin Road, SBIP, Hsin-Chu, Taiwan, R.O.C. Tel : 886-3-5642000 Fax : 886-3-5642050 Taipei Branch : 7F, No. 137, Lane 235, Pac Chiao Rd., Hsin Tien City, Taipei Hsien, Taiwan, R. O. C. Tel : 886-2-89191368 Fax : 886-2-89191369 Copyright  ANPEC Electronics Corp. Rev. A.2 - Apr., 2003 12 www.anpec.com.tw