APL1117D-50VC-TRL

APL1117D/R 1A, Low Dropout Fast Response Positive Regulator Fixed 3.3V and 5.0V Features • • • • • • • • • Guaranteed Output Voltage Accuracy within 2% Fast Transient Response Guaranteed Dropout Voltage at Multiple Currents Load Regulation : 0.1% Typ. Line Regulation : 0.03% Typ. Low Dropout Voltage : 1.2V Typ. at IOUT =0.8A Current Limit : 1A Typ. at TJ=125 °C On-Chip Thermal Limiting : 150 °C Typ. Standard 3-pin SOT-223 and TO-252 Power Packages General Description The APL1117D/R is a low dropout three-terminal fixed 3.3V and 5.0V regulators with 1A output current capability. In order to obtain lower dropout voltage and faster transient response, which is critical for low voltage applications , the APL1117D/R has been optimized. The dropout voltage is guaranteed at a maximum of 1.3V at 0.8A. Current limit is trimmed to ensure specified output current and controlled shortcircuit current. On-chip thermal limiting provides protection against any combination of overload that would create excessive junction temperatures. The APL1117D/R is available in the industry standard 3pin SOT-223 and TO-252 the low profile surface mount packages which can be used in applications where space is limited. Pin Description Applications • • • • Active SCSI Terminators Low Voltage Logic Supplies Battery-Powered Circuitry Post Regulator for Switching Power Supply APL1117D APL1117R GND VOUT VIN VIN GND VOUT Front View for TO-252 1 2 3 Front View for SOT-223 1 2 3 APL1117D APL1117R GND VOUT VIN VIN GND VOUT ANPEC reserves the right to make changes to improve reliability or manufacturability without notice, and advise customers to obtain the latest version of relevant information to verify before placing orders. Copyright  ANPEC Electronics Corp. Rev. A.3 - Jun., 2003 1 www.anpec.com.tw APL1117D/R Ordering and Marking Information A P L 1 1 1 7 D /R L e a d F re e C o d e H a n d lin g C o d e Tem p. R ange Package Code V o lta g e C o d e Package Code U : T O -2 5 2 V : S O T -2 2 3 Tem p. R ange C : 0 to 7 0 ° C H a n d lin g C o d e TU : Tube TR : Tape & Reel V o lta g e C o d e 3 3 : 3 .3 V 5 0 : 5 .0 V L e a d F re e C o d e L : L e a d F re e D e v ic e B la n k : O rig in a l D e v ic e A P L 1 1 1 7 D /R XXXXX33 A P L 1 1 1 7 D /R -3 3 U : 33 A P L 1 1 1 7 D /R XXXXX 50 XXXXX - D a te C o d e A P L 1 1 1 7 D /R -3 3 U : X X X X X - D a te C o d e A P L 1 1 1 7 D /R -5 0 U : A P L 1 1 1 7 D /R XXXXX XXXXX - D a te C o d e A P L 1 1 1 7 D /R -5 0 U : A P L 1 1 1 7 D /R XXXXX50 X X X X X - D a te C o d e Absolute Maximum Ratings Symbol VI TJ Parameter Input Voltage Operating Junction Temperature Range Control Section Power Transistor Storage Temperature Range Lead Temperature (Soldering, 10 second) Rating 13.2 0 to 125 0 to 150 -65 to +150 260 Unit V °C TSTG TL °C °C Electrical Characteristics Symbol V OUT REG LINE REG LOAD VD I LIMT PSRR TR TS LS Parameter Test Conditions APL1117D/R Unit Min. Typ. Max. 3.235 3.300 3.365 V 4.900 5.000 5.100 1 1 1.2 1 60 75 0.01 0.5 T J =125°C, 1000Hrs 2 APL1117D/R-33 T J =0~125 ° C, APL1117D/R-50 0 ≤ I OUT ≤ 0.8A, 4.75V ≤ V IN ≤ 12V Line Regulation T J =0~125 ° C, I OUT =0.8A, 4.75V ≤ V IN ≤ 7.75V (Note1) Load Regulation T J =0~125 ° C, V IN =4.75A, 0V ≤ I OUT ≤ 0.8A (Note1) Dropout Voltage Current Lim it Ripple Rejection I OUT ≤ 0.8A,T J =0~125°C (V IN -V OUT )=5V, T J =25°C F RIPPLE =120Hz, V RIPPLE =1 VP-P (V IN -V OUT )=3V,T J =0~125°C 6 10 1.3 mV mV V A dB %/W % % Thermal Regulation T J =25°C, 30ms Pulse Temperature Stability Long -Term Stability 0.3 Copyright  ANPEC Electronics Corp. Rev. A.3 - Jun., 2003 www.anpec.com.tw APL1117D/R Electrical Characteristics Symbol VN θ th OT Parameter RMS Output Noise Test Conditions T J=25 ° C,10Hz ≤ F ≤ 10kHz, (% of V OUT ) APL1117D/R Unit Min. Typ. Max. 0.003 15 50 150 5.5 10 % ° C/ W °C mA Thermal Resistance Junction to Case, at Tab Junction to ambient Over Temperature Point Quiescent Current T J=0~125 ° C, V IN ≤ 12V Note 1: See thermal regulation specifications for changes in output voltage due to heating effects. Load line regulations are measured at a constant junction temperature by low duty cycle pulse testing. Note 2: Dropout voltage is specified over the full output current range of the device. Dropout voltage is defined as the minimum input/ output differential measured at the specified output current. Test points and limits are also shown on the Dropout Voltage curve. Note 3: Minimum load current is defined as the minimum output current required to maintain regulation. Application Schematic VIN=5~12V APL1117D/R VOUT + CIN 10uF + COUT1 0.1uF + COUT2 10uF Copyright  ANPEC Electronics Corp. Rev. A.3 - Jun., 2003 3 www.anpec.com.tw APL1117D/R Typical Characteristics Input Current vs. Temperature 8 Current Limit vs. Temperature V out=3.3V 1.3 V out=3.3V 7 1.2 Input Current (mA) Current Limit (mA) 6 1.1 5 1 4 Vin-Vout=5V 0.9 3 0.8 2 -5 0 -2 5 0 25 50 75 1 00 1 25 0.7 -50 -30 -10 10 30 50 70 90 110 130 150 Temperature (°C) Temperature (°C) Load Transient Response 5 4.5 Line Transient Response V out=3.3V 0.02 V out=3.3V 6 0.15 Output Voltage Deviation (V) Output Current (A) Input Voltage (V) 3.5 3 2.5 2 1.5 1 0.5 0 -100 0 100 200 300 400 500 600 700 800 -0.03 900 0 0.1 4 3 CIN=10uF Cout=10uF Tantalum V IN=5V CIN=10uF Cout=10uF Tantalum IOUT=0.1A 0.05 -0.01 2 0 1 -0.05 -20 30 80 130 180 -0.02 0 Time (µs) Time (µs) Copyright  ANPEC Electronics Corp. Rev. A.3 - Jun., 2003 4 www.anpec.com.tw Output Voltage Deviation (V) 4 0.01 5 APL1117D/R Typical Characteristics Dropout Voltage vs. Output Current 1.3 Output Voltage vs. Input Voltage 3.5 V out=3.3V V out=3.3V 1.25 3 Dropout Voltage (V) 1.2 Outputt Voltage (V) 0 0.2 0.4 0.6 0.8 1 2.5 1.15 1.1 2 1.5 1.05 1 1 0.95 0.9 0.5 0 0 1 2 3 4 5 6 7 8 9 Output Current (A) Iutput Voltage (V) Input Current vs. Input Voltage 6 V out=3.3V Current Limit vs. Input Voltage 1.12 V out=3.3V 5 1.1 Input Current (mA) Current Limit (A) 4 1.08 3 1.06 2 1.04 1 1.02 0 0 2 4 6 8 10 1 4 5 6 7 8 9 10 11 12 13 Input Voltage (V) Input Voltage (V) Copyright  ANPEC Electronics Corp. Rev. A.3 - Jun., 2003 5 www.anpec.com.tw APL1117D/R Typical Characteristics Cont. Output Voltage vs. Temperature 3.6 V out=3.3V 3.5 Output Voltage (V) 3.4 3.3 3.2 3.1 3 -50 -25 0 25 50 75 100 125 Temperature (°C) Copyright  ANPEC Electronics Corp. 6 Rev. A.3 - Jun., 2003 6 www.anpec.com.tw APL1117D/R Package Information SOT-223( Reference JEDEC Registration SOT-223) D B1 A c a H E L K e e1 b A1 B Dim A A1 B B1 c D E e e1 H L K α β Min. 1.50 0.02 0.60 2.90 0.28 6.30 3.30 Millimeters Max. 1.80 0.08 0.80 3.10 0.32 6.70 3.70 2.3 BSC 4.6 BSC 6.70 0.91 1.50 0° 7.30 1.10 2.00 10° 0.26 0.04 0.06 0° Min. 0.06 0.02 0.11 0.01 0.25 0.13 Inches Max. 0.07 0.03 0.12 0.01 0.26 0.15 0.09 BSC 0.18 BSC 0.29 0.04 0.08 10° 13° 13° Copyright  ANPEC Electronics Corp. Rev. A.3 - Jun., 2003 7 www.anpec.com.tw APL1117D/R Package Informaion TO-252( Reference JEDEC Registration TO-252) E b2 L2 A C1 D H L1 L b e1 D1 C A1 E1 Dim A A1 b b2 C C1 D D1 E E1 e1 H L L1 L2 M illim et er s M in. 2. 1 8 0. 8 9 0. 5 08 5. 2 07 0. 4 6 0. 4 6 5. 3 34 5. 2 R EF 6. 3 5 5. 3 R EF 3. 9 6 9. 3 98 0. 5 1 0. 6 4 0. 8 9 1. 0 2 2. 0 32 8 Inc he s M ax. 2. 3 9 1. 2 7 0. 8 9 5. 4 61 0. 5 8 0. 5 8 6. 2 2 6. 7 3 5. 1 8 10 . 41 M in. 0. 0 86 0. 0 35 0. 0 20 0. 2 05 0. 0 18 0. 0 18 0. 2 10 0. 2 05 R EF 0. 2 50 0. 2 09 R EF 0. 1 56 0. 3 70 0. 0 20 0. 0 25 0. 0 35 0. 0 40 0. 0 80 www.anpec.com.tw M ax. 0. 0 94 0. 0 50 0. 0 35 0. 2 15 0. 0 23 0. 0 23 0. 2 45 0. 2 65 0. 2 04 0. 4 10 Copyright  ANPEC Electronics Corp. Rev. A.3 - Jun., 2003 APL1117D/R Physical Specifications Terminal Material Lead Solderability Solder-Plated Copper (Solder Material : 90/10 or 63/37 SnPb), 100%Sn Meets EIA Specification RSI86-91, ANSI/J-STD-002 Category 3. Reflow Condition TP (IR/Convection or VPR Reflow) tp C ritical Zone T L to T P R am p-up T e m p e ra tu re TL T sm ax tL T sm in R am p-down ts Preheat 25 t 25 °C to Peak T im e Classificatin Reflow Profiles Profile Feature Sn-Pb Eutectic Assembly Large Body Small Body Pb-Free Assembly Large Body Small Body 3°C/second max. 150°C 200°C 60-180 seconds 3°C/second max 217°C 60-150 seconds 245 +0/-5°C 250 +0/-5°C 10-30 seconds 20-40 seconds 6°C/second max. 8 minutes max. www.anpec.com.tw Average ramp-up rate 3°C/second max. (TL to TP) Preheat - Temperature Min (Tsmin) 100°C - Temperature Mix (Tsmax) 150°C - Time (min to max)(ts) 60-120 seconds Tsmax to TL - Ramp-up Rate Tsmax to TL - Temperature(TL) 183°C - Time (tL) 60-150 seconds Peak Temperature(Tp) 225 +0/-5°C 240 +0/-5°C Time within 5°C of actual Peak 10-30 seconds 10-30 seconds Temperature(tp) Ramp-down Rate 6°C/second max. 6 minutes max. Time 25°C to Peak Temperature Copyright  ANPEC Electronics Corp. Rev. A.3 - Jun., 2003 9 Note: All temperatures refer to topside of the package. Measured on the body surface. APL1117D/R Reliability Test Program Test item S OLDERABILITY H OLT P CT T ST E SD Latch-Up Method MIL-STD-883D-2003 MIL-STD-883D-1005.7 JESD-22-B,A102 MIL-STD-883D-1011.9 MIL-STD-883D-3015.7 JESD 78 Description 245 °C, 5 SEC 1000 Hrs Bias @125°C 168 Hrs, 100% RH, 121°C -65 °C~150°C, 200 Cycles VHBM > 2KV, VMM > 200V 10ms, 1tr > 100mA Carrier Tape t P P1 D Po E F W Bo Ao Ko D1 T2 J C A B T1 Copyright  ANPEC Electronics Corp. Rev. A.3 - Jun., 2003 10 www.anpec.com.tw APL1117D/R Carrier Tape Application TO-252 Application TO-252 Application SOT-223 Application SOT-223 A 330±3 F 7.5 ± 0.1 A 330±1 F 5.5 ± 0.05 B 100 ± 2 D 1.5± 0.1 B 62±1.5 D 1.5+ 0.1 C 13 ± 0. 5 D1 1.5+ 0.25 C 12.75± 0.15 D1 1.5+ 0.1 J 2 ± 0.5 Po 4.0 ± 0.1 J 2 ± 0.6 Po T1 16.4 +0.3 -0.2 P1 2.0 ± 0.1 T1 12.4 +0.2 P1 T2 2.5± 0.5 Ao 6.8 ± 0.1 T2 2± 0.2 Ao W 16 + 0.3 16 - 0.1 Bo 10.4± 0.1 W 12 ± 0.3 Bo 7.5± 0.1 P 8 ± 0.1 Ko 2.5± 0.1 P 8 ± 0.1 Ko 2.1± 0.1 E 1.75± 0.1 t 0.3±0.05 E 1.75± 0.1 t 0.3±0.05 4.0 ± 0.1 2.0 ± 0.05 6.9 ± 0.1 (mm) Cover Tape Dimensions Application SOT- 223 TO- 252 Carrier Width 12 16 Cover Tape Width 9.3 13.3 Devices Per Reel 2500 2500 Customer Service Anpec Electronics Corp. Head Office : 5F, No. 2 Li-Hsin Road, SBIP, Hsin-Chu, Taiwan, R.O.C. Tel : 886-3-5642000 Fax : 886-3-5642050 Taipei Branch : 7F, No. 137, Lane 235, Pac Chiao Rd., Hsin Tien City, Taipei Hsien, Taiwan, R. O. C. Tel : 886-2-89191368 Fax : 886-2-89191369 Copyright  ANPEC Electronics Corp. Rev. A.3 - Jun., 2003 11 www.anpec.com.tw