APL531230S5I-TRG

APL5312 Ultra-Low-Noise, High PSRR, Low-Dropout, 300mA Linear Regulator Features • • • • • • • • • • • • • Wide Operating Voltage: 2.3V~6V Low Dropout Voltage: 290mV @ 3V/300mA Fixed Output Voltages: 1.5V~3.5V with Step 100mV, 2.85V Guaranteed 300mA Output Current High PSRR: 74dB before 10kHz Low Output Noise: 36µVRMS at 100Hz to 100kHz Current-Limit Protection Controlled Short Circuit Current: 50mA Over-Temperature Protection Stable with 1µF Capacitor for Any Load Excellent Load/Line Transient SOT-23-5 and SC-70-5 Packages Lead Free and Green Devices Available (RoHS Compliant) General Description The APL5312 is an ultra low noise, low dropout linear regulator, which operates from 2.3V to 6V input voltage and delivers up to 300mA. Typical dropout voltage is only 290mV at 300mA loading. Designed for use in RF applications, the high PSRR 74dB and low noise 36µVRMS makes it an ideal choice. Design with an internal P-channel MOSET pass element, the APL5312 maintains a low supply current, independent of the load current and dropout voltage. Other features include thermal-shutdown protection and currentlimit protection to ensure specified output current and controlled short-circuit current. The APL5312 regulator comes in a miniature SOT-23-5 and SC-70-5 package. Pin Configuration SOT-23-5/SC-70-5 Applications • • • • Cellular Phones Portable and Battery-Powered Equipment Wireless LANs GPS VIN GND SHDN 1 2 3 5 VOUT 4 BP APL5312 Ordering and Marking Information APL5312 Assembly Material Handling Code Temperature Range Package Code Voltage Code Package Code B : SOT-23-5 S5 : SC-70-5 Operating Ambient Temperature Range I : -40 to 85 oC Handling Code TR : Tape & Reel Voltage Code 15 : 1.5V 30 : 3.0V Assembly Material G : Halogen and Lead Free Device Note: ANPEC lead-free products contain molding compounds/die attach materials and 100% matte tin plate termination finish; which are fully compliant with RoHS. ANPEC lead-free products meet or exceed the lead-free requirements of IPC/JEDEC J-STD-020C for MSL classification at lead-free peak reflow temperature. ANPEC defines “Green” to mean lead-free (RoHS compliant) and halogen free (Br or Cl does not exceed 900ppm by weight in homogeneous material and total of Br and Cl does not exceed 1500ppm by weight). ANPEC reserves the right to make changes to improve reliability or manufacturability without notice, and advise customers to obtain the latest version of relevant information to verify before placing orders. Copyright © ANPEC Electronics Corp. Rev. A.4 - Jun., 2009 1 www.anpec.com.tw APL5312 Ordering and Marking Information (Cont.) SOT-23-5 packages Product Name Marking APL5312-15B APL5312-19B APL5312-23B APL5312-27B APL5312-31B APL5312-35B SC-70-5 packages Product Name APL5312-15S5 APL5312-19S5 APL5312-23S5 APL5312-27S5 APL5312-31S5 APL5312-35S5 Marking 339 33D 33H 33L 33P 33T Product Name APL5312-16B APL5312-20B APL5312-24B APL5312-28B APL5312-32B APL5312-285B Marking 33AX 33EX 33IX 33MX 33QX 33dX Product Name Marking APL5312-17B APL5312-21B APL5312-25B APL5312-29B APL5312-33B 33BX 33FX 33JX 33NX 33RX Product Name APL5312-18B APL5312-22B APL5312-26B APL5312-30B APL5312-34B Marking 33CX 33GX 33KX 33OX 33SX 339X 33DX 33HX 33LX 33PX 33TX Product Name APL5312-16S5 APL5312-20S5 APL5312-24S5 APL5312-28S5 APL5312-32S5 APL5312-285S5 Marking 33A 33E 33I 33M 33Q 33d Product Name APL5312-17S5 APL5312-21S5 APL5312-25S5 APL5312-29S5 APL5312-33S5 Marking 33B 33F 33J 33N 33R Product Name APL5312-18S5 APL5312-22S5 APL5312-26S5 APL5312-30S5 APL5312-34S5 Marking 33C 33G 33K 33O 33S Absolute Maximum Ratings Symbol VIN, VOUT SHDN/BP TJ TSTG TSDR Input Voltage or Out Voltage (Note 1) Rating 6.5 6.5 0 to 125 -65 to +150 260 Unit V V ° C ° C ° C Parameter VOUT Shutdown Control Pin/Bypass Signal Pin Operating Junction Temperature Storage Temperature Range Maximum Lead Temperature Soldering, 10 Seconds Note 1: Absolute Maximum Ratings are those values beyond which the life of a device may be impaired. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Thermal Characteristics Symbol θJA Parameter Thermal Resistance-Junction to Ambient (Note 2) Rating SOT-23-5 SC-70-5 240 325 410 310 Unit o C/W Power Dissipation, TA = 25 oC (Note 3) PD SOT-23-5 SC-70-5 mW Note 2 : θJA is measured with the component mounted on a high effective thermal conductivity test board in free air. Note 3 : When mounted on a (Copper foil area 50%, 45x45x1.6tmm) glass epoxy board. Copyright © ANPEC Electronics Corp. Rev. A.4 - Jun., 2009 2 www.anpec.com.tw APL5312 Electrical Characteristics Unless otherwise noted these specifications apply over full temperature, VIN = VOUT+1V, CIN = COUT = 1µ F, TA = -40 to 85°C. Typical values refer to TA = 25°C. Symbol VIN VOUT Parameter Input Voltage Output Voltage Accuracy Output Voltage Range ILIMIT IQ IOUT REGLINE REGLOAD Circuit Current Limit Quiescent Current Load Current Line Regulation Load Regulation Dropout Voltage (Note 4) VOUT+0.5V