APL5320-12BI-TRG

APL5320/A Ultra-Low-Noise, High PSRR, Low-Dropout, 300mA Linear Regulator Features General Description • Wide Operating Voltage: 2.5~6V • Low Dropout Voltage: 290mV @ 3V/300mA The APL5320/A is a P-channel low dropout linear regulator which needs only one input voltage from 2.5 to 6V, and • Guaranteed 300mA Output Current • High PSRR: 70dB • Current-Limit Protection • Controlled Short-Circuit Current: 50mA • Over-Temperature Protection • Stable with 1µF Capacitor for Any Load • Excellent Load/Line Transient • SOT-23-5, TSOT-23-5, SOT-23-3, SC-70-5,SC-82-4, • delivers current up to 300mA to set output voltage. It also can work with low ESR ceramic capacitors and is ideal for using in the battery-powered applications such as notebook computers and cellular phones. Typical dropout voltage is only 290mV at 300mA loading. The APL5320/A provides several versions of fixed output voltages ranging. Current-limit with current foldback and thermal shutdown functions protects the device against TDFN1.5x1.5-6 and TDFN1.6x1.6-6 Packages current over-loads and over-temperature. The APL5320/A is available in SOT-23-5, TSOT-23-5, SOT-23-3, SC-70-5, Lead Free and Green Devices Available SC-82-4, TDFN1.5x1.5-6 and TDFN 1.6x1.6-6 packages. (RoHS Compliant) Applications Pin Configuration • Cellular Phones • Portable and Battery-Powered Equipments • Laptops, Palmtops, Notebook Computers • Wireless LANs • Portable Information Appliances • GPSes VIN 1 GND 2 SHDN 3 5 VOUT 4 NC VOUT 2 VIN VOUT APL5320 SOT-23-3 (Top View) SHDN 1 NC 2 VOUT SHDN GND 6 2 5 3 4 SHDN NC NC SHDN 1 GND 1 Simplified Application Circuit 1 APL5320A TDFN1.5x1.5-6 (Top View) APL5320 SOT23-5/TSOT-23-5/SC-70-5 (Top View) 3 VIN VIN VIN GND VOUT VIN 3 4 VIN GND 2 3 VOUT APL5320 SC-82-4 (Top-View) 6 GND 5 NC 4 VOUT APL5320 TDFN1.6x1.6-6 (Top View) Enable = Exposed Pad (connected to ground plane for better heat dissipation) ANPEC reserves the right to make changes to improve reliability or manufacturability without notice, and advise customers to obtain the latest version of relevant information to verify before placing orders. Copyright  ANPEC Electronics Corp. Rev. A.14 - Jun., 2018 1 www.anpec.com.tw APL5320/A Ordering and Marking Information Package Code B : SOT-23-5 BT : TSOT-23-5 A : SOT-23-3 SR : SC-82-4 S5 : SC-70-5 QB : TDFN1.6x1.6-6 QB : TDFN1.5x1.5-6 (only for APL5320A) Operating Ambient Temperature Range I : -40 to 85 oC Handling Code TR : Tape & Reel Voltage Code 12 : 1.2V Assembly Material G : Halogen and Lead Free Device APL5320/A Assembly Material Handling Code Temperature Range Package Code Voltage Code Note : ANPEC lead-free products contain molding compounds/die attach materials and 100% matte tin plate termination finish; which are fully compliant with RoHS. ANPEC lead-free products meet or exceed the lead-free requirements of IPC/JEDEC J-STD-020D for MSL classification at lead-free peak reflow temperature. ANPEC defines “Green” to mean lead-free (RoHS compliant)and halogen free (Br or Cl does not exceed 900ppm by weight in homogeneous material and total of Br and Cl does not exceed 1500ppm by weight). SOT-23-5 SOT-23-3 Product Name Marking APL5320-12B 205X APL5320-15B 209X APL5320-18B 20CX APL5320-20B 20EX APL5320-25B 20JX APL5320-28B 20MX APL5320-30B 20OX APL5320-33B 20RX Product Name Marking APL5320-12A 205X APL5320-15A 209X APL5320-18A 20CX APL5320-20A 20EX APL5320-25A 20JX APL5320-28A 20MX APL5320-30A 20OX APL5320-33A 20RX Note: X - Code. TSOT-23-5 Product Name Marking APL5320-12BT 205X APL5320-15BT 209X APL5320-18BT 20CX APL5320-20BT 20EX APL5320-25BT 20JX APL5320-28BT 20MX APL5320-30BT 20OX APL5320-33BT 20RX Note: X - Code. SC-70-5 Note : X - Code. TDFN1.6x1.6-6 / TDFN1.5x1.5-6 Product Name Marking APL5320-12QB 205X APL5320-15QB 209X APL5320-18QB 20CX APL5320-20QB 20EX APL5320-25QB 20JX APL5320-28QB 20MX APL5320-30QB 20OX APL5320-33QB 20RX Product Name Marking APL5320-12S5 205 APL5320-15S5 209 APL5320-18S5 20C APL5320-20S5 20E APL5320-25S5 20J APL5320-28S5 20M APL5320-30S5 20O APL5320-33S5 20R SC-82-4 Product Name Marking APL5320-12SR 205 APL5320-15SR 209 APL5320-18SR 20C APL5320-20SR 20E APL5320-25SR 20J APL5320-28SR 20M APL5320-30SR 20O APL5320-33SR 20R Note : X - Code. Copyright  ANPEC Electronics Corp. Rev. A.14 - Jun., 2018 2 www.anpec.com.tw APL5320/A Absolute Maximum Ratings Symbol VIN VOUT VSHDN TJ TSTG TSDR (Note 1) Parameter Rating Unit VIN to GND Voltage -0.3 ~ 6.5 V VOUT to GND Voltage -0.3 ~ 6.5 V SHDN to GND Voltage -0.3 ~ 6.5 Maximum Junction Temperature -40 ~ 150 o -65 ~ 150 o 260 o Storage Temperature Maximum Lead Soldering Temperature, 10 Seconds V C C C Note1: Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Thermal Characteristics Sym bol Parameter Jun ction -to-Ambie nt Resista nce i n Fre e Air Typical Va lue Unit (No te 2 ) θ JA S OT-2 3-5 240 TS OT-2 3-5 250 S OT-2 3-3 240 S C- 70-5/SC-8 2-4 325 TDFN1.6x1.6-6 165 TDFN1.5x1.5-6 180 o C/W Jun ction -to-Case Re sistance in Free Air θ JC S OT-2 3-5 120 TS OT-2 3-5 130 S OT-2 3-3 120 S C- 70-5/SC-8 2-4 220 Note 2 : θJA is measured with the component mounted on a high effective thermal conductivity test board in free air. Recommended Operating Conditions (Note 3) Parameter Range Unit VIN Input Voltage 2.5 ~ 6 V SHDN Input Voltage 2.5 ~ 6 V IOUT VOUT Output Current 0 ~300 mA VOUT Output Voltage COUT Output Capacitor Symbol VIN VSHDN TA TJ Fixed Voltage 1~22 Ambient Temperature Junction Temperature µF -40 ~ 85 o C -40 ~ 125 o C Note 3 : Refer to the typical application circuit. Copyright  ANPEC Electronics Corp. Rev. A.14 - Jun., 2018 3 www.anpec.com.tw APL5320/A Electrical Characteristics Unless otherwise specified, these specifications apply over VIN=VOUT+1V, CIN=COUT=1µF and TA=-40~85 oC. Typical values are at TA=25oC. Sym bol Parameter APL532 0/A Te st Conditions Unit Min. Typ. Max. 1.9 2.2 2.4 UNDER-VOLTAGE LO CKAGE ( UV LO) AND S UP PLY CURRENT VIN UVLO Thre sh old Volta ge o V IN risi ng, T A=-4 0~8 5 C VIN UVLO Hyster esis V - 0.1 - V I OUT =0mA, VSHD N=5 V - 40 60 µA I OUT =30 0mA V SHDN=5V - 40 60 µA V SHDN =0V, VIN= V OU T+1V - - 1 µA -2 - 2 % I OUT =1mA to 30 0mA, T A=- 40~85 C -3 - 3 % REGL IN E Lin e Re gulation ΔVOUT %/ΔV IN, VOUT+0.3V