APL5507-18XC

APL5505/6/7 500mA Regulator + Reset IC Features • • • Low Quiescent Current : 120uA (No load) Low Dropout Voltage : 300mV (VOUT=3.3V@ 500mA) Fixed Output Voltage : 1.3V,1.4V,1.5V,1.6V, 1.7V,1.8V,1.9V, 2.0V,2.1V,2.2V,2.3V,2.4V, 2.5V,2.6V,2.7V, 2.8V,2.9V,3.0V,3.1V,3.2V, 3.3V,3.4V. Stable with 4.7uF Output Capacitor Stable with Aluminum , Tantalum or Ceramic Capacitors . Reverse Current Protection No Protection Diodes Needed Built in Thermal Protection Built in Current Limit Protection Controlled Short Circuit Current : 50mA Fast transient Response Short Setting Time SOP-8,TSSOP-8 and MSOP-8 Packages. Adjustment-free Reset Detection Voltage : 3.9V or 4.2V typ. Easy to Set Delay Time from Voltage Detection to Reset Release. Reset and Reset output General Description The APL5505/6/7 is micropower, low noise , low dropout regulators with a reset function (regulator input (APL5505) or specific voltage(APL5506/7) monitoring), and internal delay circuit, set to detect 3.9V or 4.2V. Operate from 3V to 6V input voltage and deliver up to 500mA. Typical output noise is just 180uVRMS with an external 0.01uF bypass capacitor connected in BP pin and the typical dropout voltage is only 300mV at 500mA loading. Design with an internal P-channel MOSFET pass transistor, the APL5505/6/7 maintains a low supply current, independent of the load current and dropout voltage. Other features include reverse current protection, thermal-shutdown protection, current limit protection to ensure specified output current and controlled short-circuit current. The APL5505/6/ 7 regulators come in miniature SOP-8, TSSOP-8 and MSOP-8 packages. • • • • • • • • • • • • • Pin Configuration SOP-8 Top View RESET RESET CONT V IN 1 2 3 4 8 7 6 5 Cd SOP-8 Top View V D ET 1 2 3 4 8 7 6 5 Cd G ND B ypass V OUT G ND RESET B ypass C O N T V OUT V IN Applications • CD-ROM drive. APL5505 SOP-8 Top View V D ET RESET CONT V IN 1 2 3 4 8 7 6 5 Cd G ND B ypass V OUT APL5506 APL5507 ANPEC reserves the right to make changes to improve reliability or manufacturability without notice, and advise customers to obtain the latest version of relevant information to verify before placing orders. Copyright  ANPEC Electronics Corp. Rev. A.4 - Sep., 2002 1 www.anpec.com.tw APL5505/6/7 Ordering and Marking Information A P L 5 5 0 5 /6 /7 L e a d F re e C o d e H a n d lin g C o d e Tem p. R ange P ackage C ode V o lta g e C o d e D e te c tio n V o lta g e P ackage C ode K : S O P -8 O : T S S O P -8 X : M S O P -8 Tem p. R ange C : 0 to 7 0 °C I : -4 0 to 8 5 °C H a n d lin g C o d e TR : Tape & R eel V o lta g e C o d e : 1 3 : 1 .3 V ~ 3 4 : 3 .4 V D e te c tio n V o lta g e : A : 3 .9 V B : 4 .2 V L e a d F re e C o d e L : L e a d F re e D e v ic e B la n k : O rig in a l D e v ic e X - D e te c tio n V o lta g e X X X X X - D a te C o d e , 1 3 - 1 .3 V A P L 5 5 0 5 /6 /7 : A P L 5 5 0 5 /6 /7 X XXXXX13 Pin Description No. 1 2 3 4 5 6 7 8 PIN Name RESET(5505) VDET(5506/7) RESET(5507) RESET(5506) CONT VIN VOUT Bypass GND Cd I/O O I O I O O Description Input voltage detection output pin , high = VINVS Input pin of voltage detection. Input voltage detection output pin , high = VINVS Input voltage detection output pin , low = VINVS Output voltage on/off-control pin, low = off , high = on. Voltage supply input pin. Regulator output pin. Bypass signal pin, connect a bypass capacitor to reduce output noise. GND pin Delay time capacitor pin, RESET pin output delay time can be set by the capacitance connected to the Cd pin. tPLH = 160000*C, tPLH : transmission delay time (s), C:capacitor value (F) Absolute Maximum Ratings Symbol VIN, VOUT CONT Vdet RTH,JA PD TJ Parameter Input Voltage or Out Voltage Shutdown Control Pin RESET pin supply voltage Thermal Resistance – Junction to Ambient Power Dissipation Operating Junction Temperature Control Section Power Transistor TSTG TL Storage Temperature Range Lead Temperature (Soldering, 10 second) 2 Rating 6 6 6 210 Internally Limited 0 to 125 0 to 150 -65 to +150 260 Unit V V V °C/W W °C °C °C www.anpec.com.tw Copyright  ANPEC Electronics Corp. Rev. A.4 - Sep., 2002 APL5505/6/7 Electrical Characteristics Unless otherwise noted these specifications apply over full temperature , VIN=5V, CIN=4.7uF,COUT=4.7uF, CONT=VIN, TJ=0 to 125°C . Typical values refer to TJ=25°C . APL5505/6/7 Symbol Parameter Test Conditions Unit Min. Typ. Max. VIN Input Voltage 2.7 6 V VOUT Output Voltage VOUT+1.0V< VCC