APL5551KAI-TR

APL5551 Dual Channel 500mA/500mA Regulator + Reset IC Features • • Low Quiescent Current : 110µA (No load) Low Dropout Voltage : VDROP1 = 450mV @ 500mA VDROP2 = 500mV @ 500mA • Fixed Output Voltage : VOUT1 = 3.3V/500mA VOUT2 = 2.8V/500mA • • • • • • • • • Stable with 4.7µF Output Capacitor Stable with Aluminum, Tantalum or Ceramic Capacitors Built in Thermal Protection Fast Transient Response Short Setting Time SOP-8, SOP-8-P with Thermal Pad Packages Adjustment-free Reset Detection Voltage : 3.9V typ Easy to Set Delay Time from Voltage Detection to Reset Release Lead Free Available (RoHS Compliant) General Description The APL5551 is a dual-channel regulator with reset function (specific voltage monitoring), and internal delay circuit, set to detect 3.9V. Maximum input voltage is 6V, and both output1 and output2 can deliver up to 450mA. The typical dropout voltage of both channel is 500mV at 500mA loading. Design with an internal P-channel MOSFET pass transistor, the APL5551 maintains a low supply current. Other features include, thermal-shutdown protection, current limit protection to ensure specified output current. The APL5551 comes in miniature SOP-8 and SOP-8-P packages. Pin Configuration SOP-8 (Top View) V IN V OUT1 Cd V DET SOP-8-P( Top View) V IN V OUT1 Cd V DET 1 2 3 4 8 7 6 5 CONT GND RESET V OUT2 1 2 3 4 8 7 6 5 CONT GND RESET V OUT2 Applications • Optical Storage System = Thermal Pad (connected to GND plane for better heat dissipation) ANPEC reserves the right to make changes to improve reliability or manufacturability without notice, and advise customers to obtain the latest version of relevant information to verify before placing orders. Copyright © ANPEC Electronics Corp. Rev. A.2 - Oct., 2005 1 www.anpec.com.tw APL5551 Ordering and Marking Information APL5551 Lead Free Code Handling Code Temp. Range Package Code Detection Voltage APL5551 K / KA: APL5551 XXXXX Package Code K : SOP-8 Temp. Range I : -40 to 85 ° C Handling Code TR : Tape & Reel Lead Free Code L : Lead Free Device KA : SOP-8-P Blank : Original Device XXXXX - Date Code Note : A NPEC lead-free products contain molding compounds/die attach materials and 100% matte tin plate termination finish; which are fully compliant with RoHS and compatible with both SnPb and lead-free soldiering operations. ANPEC lead-free products meet or exceed the lead-free requirements of IPC/JEDEC J STD-020C for MSL classification at lead-free peak reflow temperature. Pin Description PIN No. 1 2 3 4 5 6 7 8 Name VIN VOUT1 Cd VDET VOUT2 RESET GND CONT I I/O I O O I O O Voltage supply input pin. Regulator output pin. Delay time capacitor pin, RESET pin output delay time can be set by the capacitor connected to the Cd pin. tPLH = 130000∗C, tPLH : transmission delay time (s), C:capacitor value (F) Input pin of voltage detection. Regulator output pin. Input voltage detection output pin , high = VDETVS GND pin VOUT1 on/off-control pin, VOUT1 will be turn off when CONT pull to low. Description Absolute Maximum Ratings Symbol VIN, VOUT CONT VDET RTH,JA Parameter Input Voltage or Out Voltage VOUT1 Shutdown Control Pin RESET Pin Supply Voltage Thermal Resistance – Junction to Ambient SOP-8 SOP-8-P 2 Rating 6.5 6.5 6.5 150 80 Unit V V V °C/W Copyright © ANPEC Electronics Corp. Rev. A.2 - Oct., 2005 www.anpec.com.tw APL5551 Absolute Maximum Ratings (Cont.) Symbol RTH,JC Parameter Thermal Resistance – Junction to Case SOP-8 SOP-8-P Power Dissipation at TA = 55°C (Note) SOP-8 SOP-8-P Operating Junction Temperature Control Section Power Transistor TSTG TL Storage Temperature Range Lead Temperature (Soldering, 10 second) Rating 30 5 0.7 1.4 0 to 125 0 to 170 -65 to +150 260 °C °C Unit °C/W PD TJ W °C Note: When mounted on a (Copper foil area 60%, 60x45x1.6tmm) glass exoxy board. Electrical Characteristics Unless otherwise noted these specifications apply over full temperature , VIN = 5V, CIN = 1µF, COUT1 = 4.7µF, COUT2 = 4.7µF, CONT = VIN, TA = -40 to 85°C . Typical values refer to TA = 25°C . APL5551 Min. Typ. Max. 6 IOUT1 = 0mA, IOUT2 = 0mA CONT = low, IOUT2 = 0mA VCONT = VIN 1.6 -0.3 VDET = 5V VIN = 5V VIN = 5V 500 VOUT+0.5V< VIN 2KV, VMM > 200V 10ms, 1tr > 1 00mA Carrier Tape t P P1 D Po E F W Bo Ao Ko D1 Copyright © ANPEC Electronics Corp. Rev. A.2 - Oct., 2005 16 www.anpec.com.tw APL5551 Carrier Tape (Cont.) T2 J C A B T1 Application A 330 ± 1 B 62 +1.5 D C J T1 12.4 ± 0.2 P1 2.0 ± 0.1 T2 2 ± 0.2 Ao 6.4 ± 0.1 W 12± 0. 3 Bo 5.2± 0. 1 P 8± 0.1 Ko E 1.75±0.1 t 12.75+ 0.15 2 ± 0.5 D1 Po SOP- 8/-P F 5.5± 1 1.55 +0.1 1.55+ 0.25 4.0 ± 0.1 2.1± 0.1 0.3±0.013 (mm) Cover Tape Dimensions Application SOP- 8/-P Carrier Width 12 Cover Tape Width 9.3 Devices Per Reel 2500 Customer Service Anpec Electronics Corp. Head Office : No.6, Dusing 1st Road, SBIP, Hsin-Chu, Taiwan, R.O.C. Tel : 886-3-5642000 Fax : 886-3-5642050 Taipei Branch : 7F, No. 137, Lane 235, Pac Chiao Rd., Hsin Tien City, Taipei Hsien, Taiwan, R. O. C. Tel : 886-2-89191368 Fax : 886-2-89191369 Copyright © ANPEC Electronics Corp. Rev. A.2 - Oct., 2005 17 www.anpec.com.tw