APL5901-23VC

APL5901/2 Low IQ, Low Dropout 900mA Fixed Voltage Regulator Features • • • • • • • • • • • • • • • • Low Noise : 50µVRMS (100Hz to 100kHz) Low Quiescent Current : 50µA (No load) Low Dropout Voltage : 210mV (@900mA) Very low Shutdown Current : < 1µA Fixed Output Voltage : 1.3V ~ 3.4V Stable with 4.7µF Output Capacitor Stable with Aluminum , Tantalum or Ceramic Capacitors . Reverse Current Protection No Protection Diodes Needed Built in Thermal Protection Built in Current Limit Protection Controlled Short Circuit Current : 200mA Fast Transient Response Short Setting Time SOT-89, SOT-89-5, SOT-223, SO-8 ,TO-252 and TO-252-5 Packages Lead Free Available (RoHS Compliant) Design with an internal P-channel MOSFET pass transistor, the APL5901/2 maintains a low supply current, independent of the load current and dropout voltage. Other features include reverse current protection, thermal-shutdown protection, current limit protection to ensure specified output current and controlled short-circuit current. The APL5901/2 regulator come in a miniature SOT-89, SOT-89-5, SOT-223, SO8, TO-252 and TO-252-5 packages. Pin Configuration APL5901 BP TAB is GND GND SHDN 5 1 2 3 4 2 3 1 V IN GND VOUT V OUT GND V IN SOT-89 (Top View) SOT-89-5 (Top View) TAB is GND Applications IN 1 2 3 4 8 7 6 5 OUT GND GND • • • Notebook Computer PDA or Portable Equipments Noise-Sensitive Instrumentation Systems GND GND SHDN 1 BYP 2 3 General Description The APL5901/2 is micropower, low noise, low dropout linear regulator. Operate from 2.7V to 6V input voltage and deliver up to 900mA. Typical output noise is just 50µVRMS with the addition of an external 0.1µF bypass capacitor in BP pin and typical dropout voltage is only 210mV at 900mA loading. Designed for use in battery-powered system, the low 50µA quiescent current makes it an ideal choice. V IN GND V OUT SO-8 (Top View) TAB is GND SOT-223 (Top View) VOUT BP GND SHDN VIN TAB is GND 1 2 3 V IN V OUT TO-252 (Top View) TO-252-5 (Top View) ANPEC reserves the right to make changes to improve reliability or manufacturability without notice, and advise customers to obtain the latest version of relevant information to verify before placing orders. Copyright © ANPEC Electronics Corp. Rev. B.2 - May., 2005 1 www.anpec.com.tw 1 2 3 4 5 APL5901/2 Pin Configuration (Cont.) APL5902 TAB is V OUT 1 2 3 GND V O U T V IN SOT-223 (Top View) Ordering and Marking Information APL5901/2 Lead Free Code Handling Code Temp. Range Package Code Voltage Code Package Code D : S OT-89 D5 : SOT-89-5 U : TO-252 U5 : TO-252-5 V : SOT-223 K : SO-8 Temp. Range C : 0 to 70 ° C Handling Code TR : Tape & Reel Voltage Code : 13 : 1.3V ~ 34 : 3.4V Lead Free Code L : Lead Free Device Blank : Original Device XXXXX - Date Code , 13 - 1.3V APL5901/2 - 13 D/V/K : APL5901/2 XXXXX13 13 APL5901/2 XXXXX APL5901/2 - 13 U : XXXXX - Date Code , 13 - 1.3V Note: ANPEC lead-free products contain molding compounds/die attach materials and 100% matte in plate termination finish; which are fully compliant with RoHS and compatible with both SnPb and lead-free soldiering operations. ANPEC lead-free products meet or exceed the lead-free requirements of IPC/JEDEC J STD-020C for MSL classification at lead-free peak reflow temperature. Pin Description No. 1 2 3 4 5 PIN Name VIN GND SHDN BP(Note1) VOUT (Note1) I/O I Description Supply voltage input. Ground pins of the circuitry, and all ground pins must be soldered to PCB with proper power dissipation. Shutdown control pin, low = off , high = normal. Don’ leave open. t Bypass signal pin in fixed output type device Output pin of the regulator. I O O Note1 : These pins do not exist in 3-pin package. Copyright © ANPEC Electronics Corp. Rev. B.2 - May., 2005 2 www.anpec.com.tw APL5901/2 Absolute Maximum Ratings Symbol VIN, VOUT SHDN Parameter Input Voltage or Out Voltage Shutdown Control Pin Rating 6.5 6.5 SOT-89 : 180 SOT-223 : 135 SO-8 : 150 T O-252 : 50 SOT-89 : 38 SOT-223 : 15 SO-8 : 20 T O-252 : 6 Internally Limited 0 to 125 0 to 150 -65 to +150 260 °C °C Unit V V RTH,JA Thermal Resistance – Junction to Ambient °C/W RTH,JC PD TJ Thermal Resistance – Junction to Case °C/W W °C Power Dissipation Operating Junction Temperature Control Section Power Transistor Storage Temperature Range Lead Temperature (Soldering, 10 second) T STG TL Electrical Characteristics Unless otherwise noted these specifications apply over full temperature, VIN=3.6V, CIN=1µF, COUT=4.7µF, SHDN=VIN, TJ=0 to 125°C. Typical values refer to TJ=25°C. Symbol VIN VOUT ILIMIT ISHORT IOUT Parameter Input Voltage Output Voltage Circuit Current Limit Short Current Load Current Test Conditions APL5901/2 Min. Typ. Max. 2.7 6 Unit V V A mA mA 10 6 1300 1050 700 380 dB 100 450 1 µA µA mV mV % mV VOUT+1.0V< VCC