APM1404SC-TRL

APM1404S N-Channel Enhancement Mode MOSFET Features • 20V/1.2A , RDS(ON)=90mΩ(typ.) @ VGS=4.5V RDS(ON)=120mΩ(typ.) @ VGS=2.5V Pin Description • • • • Super High Dense Cell Design Reliable and Rugged SC-70 Package Lead Free Available (RoHS Compliant) D Top View of SC-70 Applications G • Power Management in Notebook Computer, Portable Equipment and Battery Powered Systems S N-Channel MOSFET Ordering and Marking Information APM1404 Lead Free Code Handling Code Tem p. Range Package Code Package Code S : SC-70 Operating Junction Tem p. Range C : -55 to 150°C Handling Code TR : Tape & Reel Lead Free Code L : Lead Free Device Blank : Original Device APM1404 S : 04 Note: ANPEC lead-free products contain molding compounds/die attach materials and 100% matte in plate termination finish; which are fully compliant with RoHS and compatible with both SnPb and lead-free soldiering operations. ANPEC lead-free products meet or exceed the lead-free requirements of IPC/JEDEC J STD-020C for MSL classification at lead-free peak reflow temperature. ANPEC reserves the right to make changes to improve reliability or manufacturability without notice, and advise customers to obtain the latest version of relevant information to verify before placing orders. Copyright  ANPEC Electronics Corp. Rev. B.2 - Mar., 2005 1 www.anpec.com.tw APM1404S Absolute Maximum Ratings Symbol VDSS VGSS ID * IDM* IS* TJ T STG PD* RθJA* Note: *Surface Mounted on 1in2 pad area, t (TA = 25°C unless otherwise noted) Rating 20 ±10 VGS=4.5V 1.2 4.3 0.5 150 -55 to 150 T A=25°C T A=100°C 0.35 0.14 360 W °C/W A °C V A Unit Parameter Drain-Source Voltage G ate-Source Voltage Continuous Drain Current Pulsed Drain Current Diode Continuous Forward Current Maximum Junction Temperature Storage Temperature Range Maximum Power Dissipation T hermal Resistance-Junction to Ambient ≤ 10sec. (TA = 25°C unless otherwise noted) Electrical Characteristics Symbol Parameter Test Condition APM1404S Min. 20 1 0.5 0.7 90 120 0.8 255 1 ±100 120 160 1.3 Typ. Max. Unit Static Characteristics BVDSS Drain-Source Breakdown Voltage IDSS VGS(th) IGSS RDS(ON) VSD a a VGS=0V, IDS=250µA VDS=16V, VGS=0V VDS=VGS, IDS=250µA VGS=±10V, VDS=0V VGS=4.5V, IDS=1.2A VGS=2.5V, IDS=0.6A ISD=0.5A, VGS=0V V µA V nA mΩ V Zero Gate Voltage Drain Current Gate Threshold Voltage Gate Leakage Current Drain-Source On-state Resistance Diode Forward Voltage b Dynamic Characteristics Ciss Input Capacitance Coss Crss td(ON) Tr td(OFF) Tf Output Capacitance Reverse Transfer Capacitance Turn-on Delay Time Turn-on Rise Time Turn-off Delay Time Turn-off Fall Time VDD=10V, IDS=1A, VGEN=4.5V, RG=6Ω, RL=10Ω VGS=0V,VDS=15V, Frequency=1.0MHz 70 50 2 2 7 3 4 4 10 5 pF ns Copyright  ANPEC Electronics Corp. Rev. B.2 - Mar., 2005 2 www.anpec.com.tw APM1404S Electrical Characteristics (Cont.) Symbol Parameter b (TA = 25°C unless otherwise noted) APM1404S Min. Typ. Max. Test Condition Unit Gate Charge Characteristics Qg Total Gate Charge Qgs Qgd Gate-Drain Charge 5 VDS=10V, VGS=4.5V, IDS=1.2A 0.68 0.72 7 nC Gate-Source Charge Notes: a : Pulse test ; pulse width ≤300µs, duty cycle ≤ 2%. b : Guaranteed by design, not subject to production testing. Copyright  ANPEC Electronics Corp. Rev. B.2 - Mar., 2005 3 www.anpec.com.tw APM1404S Typical Characteristics Power Dissipation 0.40 1.5 Drain Current 0.32 1.2 0.24 ID - Drain Current (A) Ptot - Power (W) 0.9 0.16 0.6 0.08 o 0.3 o 0.00 TA=25 C 0 20 40 60 80 100 120 140 160 0.0 TA=25 C, VG=4.5V 0 20 40 60 80 100 120 140 160 Tj - Junction Temperature (°C) Tj - Junction Temperature (°C) Safe Operation Area Normalized Transient Thermal Resistance 10 it Thermal Transient Impedance 2 1 Duty = 0.5 ID - Drain Current (A) ds (o n) Li m 300µs 1ms 1 R 0.2 0.1 10ms 0.1 0.05 0.1 100ms 0.02 0.01 Single Pulse 2 1s T =25 C 0.01 A 0.1 o DC 1 10 50 0.01 1E-4 Mounted on 1in pad o RθJA : 360 C/W 1E-3 0.01 0.1 1 10 30 VDS - Drain - Source Voltage (V) Square Wave Pulse Duration (sec) Copyright  ANPEC Electronics Corp. Rev. B.2 - Mar., 2005 4 www.anpec.com.tw APM1404S Typical Characteristics (Cont.) Output Characteristics 5.0 4.5 4.0 VGS= 3,4,5,6,7,8,9,10V 0.20 2.5V 0.18 VGS=2.5V Drain-Source On Resistance RDS(ON) - On - Resistance (Ω) 0.16 0.14 0.12 0.10 0.08 0.06 0.04 0.02 VGS=4.5V ID - Drain Current (A) 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0.0 0 1 2 3 1.5V 2V 4 5 0 1 2 3 4 5 VDS - Drain - Source Voltage (V) ID - Drain Current (A) Transfer Characteristics 5.0 4.5 4.0 Tj=-55 C o Gate Threshold Voltage 1.8 IDS =250µA 1.6 Normalized Threshold Voltage 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 -50 -25 ID - Drain Current (A) 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0.0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 Tj=25 C Tj=125 C o o 0 25 50 75 100 125 150 VGS - Gate - Source Voltage (V) Tj - Junction Temperature (°C) Copyright  ANPEC Electronics Corp. Rev. B.2 - Mar., 2005 5 www.anpec.com.tw APM1404S Typical Characteristics (Cont.) Drain-Source On Resistance 1.8 VGS = 4.5V 1.6 IDS = 1.2A 1 Tj=150 C o Source-Drain Diode Forward 5 Normalized On Resistance 1.2 1.0 0.8 0.6 RON@Tj = 25°C : 90mΩ 0.4 -50 -25 0 25 50 75 100 125 150 IS - Source Current (A) 1.4 Tj=25 C 0.1 o 0.01 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 Tj - Junction Temperature (°C) VSD - Source - Drain Voltage (V) Capacitance 500 Frequency=1MHz 5 VDS=10V IDS = 1.2A Gate Charge VGS - Gate-source Voltage (V) 400 4 C - Capacitance (pF) 300 Ciss 3 200 2 100 Crss 0 Coss 1 0 0 4 8 12 16 20 0 1 2 3 4 5 6 VDS - Drain - Source Voltage (V) QG - Gate Charge (nC) Copyright  ANPEC Electronics Corp. Rev. B.2 - Mar., 2005 6 www.anpec.com.tw APM1404S Packaging Information SC-70 D e1 e £c L E1 E L1 b 0.20 C A1 A2 A S ymbol A A1 A2 b c D E E1 e e1 L L1 θ Dimens ions In M illim et ers M in. M ax. 0 .900 1.100 0.000 0.900 0 .200 0 .080 2 .000 1 .150 2.150 0 .650T YP 1.200 0 .525RE F 0.260 0° 0.460 8° 7 Dimens ions In Inches M in. M ax. 0.035 0.043 0.000 0.035 0.008 0.003 0.079 0.045 0.085 0.026T YP 0.047 0.021PE F 0.010 0° 0.018 8° www.anpec.com.tw 0.100 1.000 0.400 0.150 2.200 1.350 2.450 1.400 0.004 0.039 0.016 0.006 0.087 0.053 0.096 0.055 Copyright  ANPEC Electronics Corp. Rev. B.2 - Mar., 2005 APM1404S Physical Specifications Terminal Material Lead Solderability Solder-Plated Copper (Solder Material : 90/10 or 63/37 SnPb), 100%Sn Meets EIA Specification RSI86-91, ANSI/J-STD-002 Category 3. Reflow Condition TP (IR/Convection or VPR Reflow) tp C ritical Zone T L to T P R am p-up T e m p e ra tu re TL T sm ax tL T sm in R am p-down ts Preheat 25 t 2 5 °C to Peak T im e Classificatin Reflow Profiles Profile Feature Sn-Pb Eutectic Assembly Large Body Small Body Pb-Free Assembly Large Body Small Body 3°C/second max. 150°C 200°C 60-180 seconds 3°C/second max 217°C 60-150 seconds 245 +0/-5°C 250 +0/-5°C 10-30 seconds 20-40 seconds 6°C/second max. 8 minutes max. www.anpec.com.tw Average ramp-up rate 3°C/second max. (TL to TP) Preheat - Temperature Min (Tsmin) 100°C - Temperature Mix (Tsmax) 150°C - Time (min to max)(ts) 60-120 seconds Tsmax to TL - Ramp-up Rate Tsmax to TL - Temperature(TL) 183°C - Time (tL) 60-150 seconds Peak Temperature(Tp) 225 +0/-5°C 240 +0/-5°C Time within 5°C of actual Peak 10-30 seconds 10-30 seconds Temperature(tp) Ramp-down Rate 6°C/second max. 6 minutes max. Time 25°C to Peak Temperature Copyright  ANPEC Electronics Corp. Rev. B.2 - Mar., 2005 8 Note: All temperatures refer to topside of the package. Measured on the body surface. APM1404S Reliability Test Program Test item SOLDERABILITY HOLT PCT TST Method MIL-STD-883D-2003 MIL-STD 883D-1005.7 JESD-22-B, A102 MIL-STD 883D-1011.9 Description 245°C,5 SEC 1000 Hrs Bias @ 125°C 168 Hrs, 100% RH, 121°C -65°C ~ 150°C, 200 Cycles Carrier Tape & Reel Dimensions t E Po P P1 D F W Bo Ao D1 T2 Ko J C A B T1 Application A 178±1 B C J T1 T2 2.8± 0.2 Ao 14.4 ± 0.4 13.0 + 0.2 1.15 ± 0.1 12. ±0.2 D D1 Po P1 W 8.0+ 0.3 - 0.1 Bo P 4 ± 0.1 Ko E 1.75± 0.1 t SC-70 F 3.5 ± 0.05 1.55± 0.05 1.00 +0.25 4.0 ± 0.1 2.0 ± 0.05 2.4 ± 0.1 2.4± 0.1 1.19± 0.1 0.25±0.013 Copyright  ANPEC Electronics Corp. Rev. B.2 - Mar., 2005 9 www.anpec.com.tw APM1404S Cover Tape Dimensions Application SC- 70 Carrier Width 8 Cover Tape Width 5.3 Devices Per Reel 3000 Customer Service Anpec Electronics Corp. Head Office : 5F, No. 2 Li-Hsin Road, SBIP, Hsin-Chu, Taiwan, R.O.C. Tel : 886-3-5642000 Fax : 886-3-5642050 Taipei Branch : 7F, No. 137, Lane 235, Pac Chiao Rd., Hsin Tien City, Taipei Hsien, Taiwan, R. O. C. Tel : 886-2-89191368 Fax : 886-2-89191369 Copyright  ANPEC Electronics Corp. Rev. B.2 - Mar., 2005 10 www.anpec.com.tw