APM2300AA

APM2300AA N-Channel Enhancement Mode MOSFET Features • 20V/6A , RDS(ON)=25mΩ(typ.) @ VGS=10V RDS(ON)=32mΩ(typ.) @ VGS=4.5V RDS(ON)=40mΩ(typ.) @ VGS=2.5V Pin Description D G S • • • Super High Dense Cell Design Reliable and Rugged Lead Free Available (RoHS Compliant) Top View of SOT-23 D Applications • Power Management in Notebook Computer , Portable Equipment and Battery Powered Systems. S G N-Channel MOSFET Ordering and Marking Information APM2300A Lead Free Code Handling Code Tem p. Range Package Code Package Code A : SOT-23 O perating Junction Tem p. Range C : -55 to 150°C Handling Code TU : Tube TR : Tape & Reel Lead Free Code L : Lead Free Device Blank : Original Device XXXXX - Date Code APM2300A A : A00X Note: ANPEC lead-free products contain molding compounds/die attach materials and 100% matte in plate termination finish; which are fully compliant with RoHS and compatible with both SnPb and lead-free soldiering operations. ANPEC lead-free products meet or exceed the lead-free requirements of IPC/JEDEC J STD-020C for MSL classification at lead-free peak reflow temperature. ANPEC reserves the right to make changes to improve reliability or manufacturability without notice, and advise customers to obtain the latest version of relevant information to verify before placing orders. Copyright  ANPEC Electronics Corp. Rev. B.1 - Mar., 2005 1 www.anpec.com.tw APM2300AA Absolute Maximum Ratings Symbol VDSS VGSS ID* IDM* IS* TJ TSTG PD* RθJA* Note: *Surface Mounted on 1in pad area, t ≤ 10sec. 2 (TA = 25°C unless otherwise noted) Rating 20 ±12 VGS=10V 6 20 1 150 -55 to 150 TA=25°C TA=100°C 0.83 0.3 150 W °C/W A °C V A Unit Parameter Drain-Source Voltage Gate-Source Voltage Continuous Drain Current 300µs Pulsed Drain Current Diode Continuous Forward Current Maximum Junction Temperature Storage Temperature Range Maximum Power Dissipation Thermal Resistance-Junction to Ambient Electrical Characteristics Symbol Parameter (TA = 25°C unless otherwise noted) APM2300AA Min. Typ. Max. Test Condition Unit Static Characteristics BVDSS Drain-Source Breakdown Voltage VGS=0V, IDS=250µA IDSS VGS(th) IGSS RDS(ON) VSD a a 20 1 30 0.5 0.7 25 32 40 0.7 1 ±100 30 40 55 1.3 V µA V nA mΩ V Zero Gate Voltage Drain Current Gate Threshold Voltage Gate Leakage Current VDS=16V, VGS=0V TJ=85°C VDS=VGS, IDS=250µA VGS=±12V, VDS=0V VGS=10V, IDS=6A Drain-Source On-state Resistance VGS=4.5V, IDS=3A VGS=2.5V, IDS=2A Diode Forward Voltage b ISD=1.25A, VGS=0V Gate Charge Characteristics Qg Total Gate Charge Qgs Qgd Gate-Drain Charge 5 VDS=10V, VGS=4.5V, IDS=6A 1 1.1 10 nC Gate-Source Charge Copyright  ANPEC Electronics Corp. Rev. B.1 - Mar., 2005 2 www.anpec.com.tw APM2300AA Electrical Characteristics (Cont.) Symbol Parameter b (TA = 25°C unless otherwise noted) APM2300AA Min. Typ. Max. Test Condition Unit Dynamic Characteristics RG Ciss Coss Crss td(ON) Tr td(OFF) Tf Notes: Gate Resistance Input Capacitance Output Capacitance Reverse Transfer Capacitance Turn-on Delay Time Turn-on Rise Time Turn-off Delay Time Turn-off Fall Time VGS=0V,VDS=0V,F=1MHz VGS=0V, VDS=15V, Frequency=1.0MHz VDD=10V, RL=10Ω, IDS=1A, VGEN=4.5V, RG=6Ω 6 420 100 60 8 6 19 7 15 12 35 23 Ω pF ns a : Pulse test ; pulse width≤300µs, duty cycle≤2%. b : Guaranteed by design, not subject to production testing. Copyright  ANPEC Electronics Corp. Rev. B.1 - Mar., 2005 3 www.anpec.com.tw APM2300AA Typical Characteristics Power Dissipation 1.0 0.9 6 0.8 0.7 5 4 3 2 1 0.1 0.0 TA=25 C 0 20 40 60 80 100 120 140 160 o Drain Current 7 0.6 0.5 0.4 0.3 0.2 ID - Drain Current (A) Ptot - Power (W) TA=25 C,VG=10V 0 0 20 40 60 80 100 120 140 160 o Tj - Junction Temperature (°C) Tj - Junction Temperature (°C) Safe Operation Area Normalized Transient Thermal Resistance 100 2 1 Thermal Transient Impedance Duty = 0.5 0.2 0.1 ID - Drain Current (A) R ds (o n) L 10 im it 1ms 0.1 0.05 0.02 0.01 1 10ms 100ms 0.01 Single Pulse 0.1 1s DC 0.01 TA=25 C 0.1 1 10 100 o 1E-3 1E-4 1E-3 0.01 Mounted on 1in pad o RθJA : 150 C/W 2 0.1 1 10 100 VDS - Drain - Source Voltage (V) Square Wave Pulse Duration (sec) Copyright  ANPEC Electronics Corp. Rev. B.1 - Mar., 2005 4 www.anpec.com.tw APM2300AA Typical Characteristics (Cont.) Output Characteristics 20 18 16 VGS=3,4,5,6,7,8,9,10V 60 70 Drain-Source On Resistance RDS(ON) - On - Resistance (mΩ) VGS=2.5V ID - Drain Current (A) 14 12 10 8 6 4 2 0 0 2 4 1.5V 6 8 10 2V 50 40 30 20 10 0 VGS=4.5V VGS=10V 0 4 8 12 16 20 VDS - Drain - Source Voltage (V) ID - Drain Current (A) Transfer Characteristics 20 18 16 1.50 Gate Threshold Voltage IDS =250µA ID - Drain Current (A) 14 12 10 8 6 4 2 0 0.0 0.5 Tj=125 C Tj=25 C o o Normalized Threshold Voltage 3.0 1.25 1.00 Tj=-55 C o 0.75 0.50 0.25 1.0 1.5 2.0 2.5 0.00 -50 -25 0 25 50 75 100 125 150 VGS - Gate - Source Voltage (V) Tj - Junction Temperature (°C) Copyright  ANPEC Electronics Corp. Rev. B.1 - Mar., 2005 5 www.anpec.com.tw APM2300AA Typical Characteristics (Cont.) Drain-Source On Resistance 2.0 VGS = 10V 1.8 IDS = 6A 10 20 Source-Drain Diode Forward Normalized On Resistance 1.6 1.2 1.0 0.8 0.6 0.4 0.2 0.0 -50 -25 RON@Tj=25 C: 25mΩ 0 25 50 75 100 125 150 o IS - Source Current (A) 1.4 Tj=150 C o Tj=25 C o 1 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 Tj - Junction Temperature (°C) VSD - Source - Drain Voltage (V) Capacitance 800 Frequency=1MHz 5 VDS =10V IDS = 6A Gate Charge 640 VGS - Gate - source Voltage (V) 4 C - Capacitance (pF) 480 3 Ciss 320 2 160 Crss 0 0 4 8 Coss 1 0 12 16 20 0 1 2 3 4 5 6 VDS - Drain - Source Voltage (V) QG - Gate Charge (nC) Copyright  ANPEC Electronics Corp. Rev. B.1 - Mar., 2005 6 www.anpec.com.tw APM2300AA Packaging Information SOT-23 D B 3 E 1 2 H e A A1 L C Dim A A1 B C D E e H L Millimeters Min. 1.00 0.00 0.35 0.10 2.70 1.40 1.90/2.1 BSC. 2.40 0.37 3.00 Max. 1.30 0.10 0.51 0.25 3.10 1.80 Inches Min. Max. 0.039 0.051 0.000 0.004 0.014 0.020 0.004 0.010 0.106 0.122 0.055 0.071 0.075/0.083 BSC. 0.094 0.118 0.015 Copyright  ANPEC Electronics Corp. Rev. B.1 - Mar., 2005 7 www.anpec.com.tw APM2300AA Physical Specifications Terminal Material Lead Solderability Solder-Plated Copper (Solder Material : 90/10 or 63/37 SnPb), 100%Sn Meets EIA Specification RSI86-91, ANSI/J-STD-002 Category 3. Reflow Condition (IR/Convection or VPR Reflow) TP R am p-up tp C ritical Zone T L to T P T e m p e ra tu re TL T sm ax tL T sm in R am p-down ts Preheat 25 t 2 5 °C to Peak T im e Classification Reflow Profiles Profile Feature Average ramp-up rate (TL to TP) Preheat - Temperature Min (Tsmin) - Temperature Max (Tsmax) - Time (min to max) (ts) Time maintained above: - Temperature (TL) - Time (tL) Peak/Classificatioon Temperature (Tp) Time within 5°C of actual Peak Temperature (tp) Ramp-down Rate Sn-Pb Eutectic Assembly 3°C/second max. 100°C 150°C 60-120 seconds 183°C 60-150 seconds See table 1 10-30 seconds Pb-Free Assembly 3°C/second max. 150°C 200°C 60-180 seconds 217°C 60-150 seconds See table 2 20-40 seconds 6°C/second max. 6°C/second max. 6 minutes max. 8 minutes max. Time 25°C to Peak Temperature Notes: All temperatures refer to topside of the package .Measured on the body surface. Copyright  ANPEC Electronics Corp. Rev. B.1 - Mar., 2005 8 www.anpec.com.tw APM2300AA Classification Reflow Profiles(Cont.) T able 1. SnPb Entectic Process – P ackage Peak Reflow Tem peratures 3 3 P ackage Thickness Volum e m m Volum e m m < 350 ≥ 350 < 2.5 m m 240 +0/-5 ° C 225 +0/-5 ° C ≥ 2.5 m m 225 +0/-5 ° C 225 +0/-5 ° C Table 2. Pb-free Process – P ackage Classification Reflow Tem peratures 3 3 3 P ackage Thickness Volum e mm Volum e mm Volum e mm < 350 3 50-2000 > 2000 < 1.6 m m 260 +0 ° C* 260 +0 ° C* 260 +0 ° C* 1 .6 m m – 2 .5 m m 260 +0 ° C* 250 +0 ° C* 245 +0 ° C* ≥ 2.5 m m 250 +0 ° C* 245 +0 ° C* 245 +0 ° C* * Tolerance: The device m anufacturer/supplier s hall a ssure process com patibility up to and including the stated classification tem perature (this m eans Peak reflow tem perature +0 ° C. For exam ple 260 ° C+0 ° C) at the rated MSL level. Reliability Test Program Test item SOLDERABILITY HOLT PCT TST Method MIL-STD-883D-2003 MIL-STD 883D-1005.7 JESD-22-B, A102 MIL-STD 883D-1011.9 Description 245°C,5 SEC 1000 Hrs Bias @ 125°C 168 Hrs, 100% RH, 121°C -65°C ~ 150°C, 200 Cycles Carrier Tape & Reel Dimensions t E Po P P1 D F W Bo Ao D1 Ko Copyright  ANPEC Electronics Corp. Rev. B.1 - Mar., 2005 9 www.anpec.com.tw APM2300AA Carrier Tape & Reel Dimensions(Cont.) T2 J C A B T1 Application A 178±1 B 60 ± 1.0 D 1.5 +0.1 C 12.0 D1 0 £p .1MIN J T1 T2 1.4 Ao 3.1 2.5 ± 0.15 9.0 ± 0.5 Po 4.0 P1 2.0 ± 0.05 W 8.0+ 0.3 - 0.3 Bo 3.0 P 4.0 Ko 1.3 E 1.75 t 0.2±0.03 (mm) SOT-23 F 3.5 ± 0.05 Cover Tape Dimensions Application SOT- 23 Carrier Width 8 Cover Tape Width 5.3 Devices Per Reel 3000 Customer Service Anpec Electronics Corp. Head Office : 5F, No. 2 Li-Hsin Road, SBIP, Hsin-Chu, Taiwan, R.O.C. Tel : 886-3-5642000 Fax : 886-3-5642050 Taipei Branch : 7F, No. 137, Lane 235, Pac Chiao Rd., Hsin Tien City, Taipei Hsien, Taiwan, R. O. C. Tel : 886-2-89191368 Fax : 886-2-89191369 Copyright  ANPEC Electronics Corp. Rev. B.1 - Mar., 2005 10 www.anpec.com.tw