APM3023NDC-TRL

APM3023ND N-Channel Enhancement Mode MOSFET Features • 30V/7A, RDS(ON)=15mΩ(typ.) @ VGS=10V RDS(ON)=22mΩ(typ.) @ VGS=5V Pin Description G D S • • • Super High Dense Cell Design Reliable and Rugged Lead Free Available (RoHS Compliant) Top View of SOT-89 (2) D Applications • • Switching Regulators Switching Converters (1) G S (3) N-Channel MOSFET Ordering and Marking Information APM 3023N L e a d F re e C o d e H a n d lin g C o d e T em p. R ange P ackage C ode P ackage C ode D : S O T -8 9 O p e r a tin g J u n c tio n T e m p . R a n g e C : - 5 5 to 1 5 0 ° C H a n d lin g C o d e TU : Tube TR : Tape & Reel L e a d F re e C o d e L : L e a d F r e e D e v ic e B la n k : O r ig in a l D e v ic e APM 3023N D: APM 3023 XXXXX X X X X X - D a te C o d e Note: ANPEC lead-free products contain molding compounds/die attach materials and 100% matte in plate termination finish; which are fully compliant with RoHS and compatible with both SnPb and lead-free soldiering operations. ANPEC lead-free products meet or exceed the lead-free requirements of IPC/JEDEC J STD-020C for MSL classification at lead-free peak reflow temperature. ANPEC reserves the right to make changes to improve reliability or manufacturability without notice, and advise customers to obtain the latest version of relevant information to verify before placing orders. Copyright  ANPEC Electronics Corp. Rev. B.1 - Apr., 2005 1 www.anpec.com.tw APM3023ND Absolute Maximum Ratings (TA = 25°C unless otherwise noted) Symbol VDSS VGSS ID* IDM* IS* TJ TSTG PD* RθJA* Note: *Surface Mounted on 1in pad area, t ≤ 10sec. 2 Parameter Drain-Source Voltage Gate-Source Voltage Continuous Drain Current Pulsed Drain Current Diode Continuous Forward Current Maximum Junction Temperature Storage Temperature Range Power Dissipation for Single Operation Thermal Resistance-Junction to Ambient TA=25°C TA=100°C VGS=10V Rating 30 ±20 7 28 2 150 -55 to 150 1.47 0.58 85 Unit V A A °C W °C/W Electrical Characteristics Symbol Parameter (TA = 25°C unless otherwise noted) APM3023ND Min. Typ. Max. Test Condition Unit Static Characteristics BVDSS Drain-Source Breakdown Voltage IDSS VGS(th) IGSS RDS(ON) VSD a a VGS=0V, IDS=250µA VDS=24V, VGS=0V T J=85°C VDS=VGS, IDS=250µA VGS=±20V, VDS=0V VGS=10V, IDS=7A VGS=5V, IDS=5A ISD=1.5A, VGS=0V 30 1 30 1 1.5 15 22 0.8 2 ±100 20 28 1.3 V µA V nA mΩ V Zero Gate Voltage Drain Current Gate Threshold Voltage Gate Leakage Current Drain-Source On-state Resistance Diode Forward Voltage Gate Charge Characteristics b Qg Qgs Qgd T otal Gate Charge Gate-Source Charge Gate-Drain Charge VDS=15V, VGS=10V, IDS=7A 30 5.8 3.8 39 nC Copyright  ANPEC Electronics Corp. Rev. B.1 - Apr., 2005 2 www.anpec.com.tw APM3023ND Electrical Characteristics (Cont.) Symbol Parameter b (TA = 25°C unless otherwise noted) Test Condition APM3023ND Min. Typ. Max. Unit Dynamic Characteristics RG Gate Resistance Ciss Coss Crss td(ON) Tr td(OFF) Tf Notes: VGS=0V,VDS=0V,F=1MHz VGS=0V, VDS=25V, Frequency=1.0MHz VDD=15V, RL=15Ω, IDS=1A, VGEN=10V, RG=6Ω 2.5 830 145 15 11 17 37 20 18 26 54 30 Ω pF Input Capacitance Output Capacitance Reverse Transfer Capacitance Turn-on Delay Time Turn-on Rise Time Turn-off Delay Time Turn-off Fall Time ns a : Pulse test ; pulse width≤300µs, duty cycle≤2%. b : Guaranteed by design, not subject to production testing. Copyright  ANPEC Electronics Corp. Rev. B.1 - Apr., 2005 3 www.anpec.com.tw APM3023ND Typical Characteristics Power Dissipation 1.6 1.4 1.2 8 7 6 Drain Current Ptot - Power (W) ID - Drain Current (A) 1.0 0.8 0.6 0.4 0.2 0.0 TA=25 C 0 20 40 60 80 100 120 140 160 o 5 4 3 2 1 0 TA=25 C,VG=10V 0 20 40 60 80 100 120 140 160 o Tj - Junction Temperature (°C) Tj - Junction Temperature Safe Operation Area Normalized Transient Thermal Resistance 50 im it Thermal Transient Impedance 2 1 Duty = 0.5 0.2 0.1 10 ID - Drain Current (A) Rd s( on )L 300us 1ms 0.1 0.02 0.01 0.05 1 10ms 100ms 0.1 1s DC 0.01 Single Pulse TA=25 C 0.01 0.01 0.1 o 1 10 100 1E-3 1E-4 1E-3 0.01 Mounted on 1in pad o RθJA :85 C/W 2 0.1 1 10 100 VDS - Drain - Source Voltage (V) Square Wave Pulse Duration (sec) Copyright  ANPEC Electronics Corp. Rev. B.1 - Apr., 2005 4 www.anpec.com.tw APM3023ND Typical Characteristics (Cont.) Output Characteristics 28 VGS=5, 6, 7, 8, 9, 10V 24 35 40 Drain-Source On Resistance RDS(ON) - On - Resistance (mΩ) ID - Drain Current (A) 20 16 12 8 4 3V 0 30 25 20 15 10 5 0 VGS=10V VGS=5V 4V 0 2 4 6 8 10 0 4 8 12 16 20 24 28 VDS - Drain - Source Voltage (V) ID - Drain Current (A) Transfer Characteristics 28 24 Gate Threshold Voltage 1.6 IDS =250µA 1.4 Normalized Threshold Voltage 5 ID - Drain Current (A) 20 16 12 8 4 0 1.2 1.0 0.8 0.6 0.4 0.2 0.0 -50 -25 Tj=125 C Tj=25 C o o Tj=-55 C o 0 1 2 3 4 0 25 50 75 100 125 150 VGS - Gate - Source Voltage (V) Tj - Junction Temperature (°C) Copyright  ANPEC Electronics Corp. Rev. B.1 - Apr., 2005 5 www.anpec.com.tw APM3023ND Typical Characteristics (Cont.) Drain-Source On Resistance 2.0 VGS = 10V 1.8 IDS = 7A 10 o Source-Drain Diode Forward 30 Normalized On Resistance 1.6 1.2 1.0 0.8 0.6 0.4 0.2 0.0 -50 -25 RON@Tj=25 C: 15mΩ 0 25 50 75 100 125 150 o IS - Source Current (A) 1.4 Tj=150 C Tj=25 C o 1 0.3 0.0 0.4 0.8 1.2 1.6 2.0 Tj - Junction Temperature (°C) VSD - Source - Drain Voltage (V) Capacitance 1400 Frequency=1MHz Gate Charge 10 VDS=15V 9 I = 7A D 1200 VGS - Gate-source Voltage (V) 30 8 7 6 5 4 3 2 1 C - Capacitance (pF) 1000 Ciss 800 600 400 200 C rss 0 0 5 10 15 20 25 Coss 0 0 5 10 15 20 25 30 VDS - Drain-Source Voltage (V) QG - Gate Charge (nC) Copyright  ANPEC Electronics Corp. Rev. B.1 - Apr., 2005 6 www.anpec.com.tw APM3023ND Package Information SOT-89 (Reference EIAJ ED-7500A Reg stration SC-62) D D1 a E H 1 2 3 L B1 B e e1 C A a D im A B B1 C D D1 e e1 E H L α M illim eters M in. 1.40 0.40 0.35 0.35 4.40 1.35 1.50 B SC 3.00 B SC 2.29 3.75 0.80 2.60 4.25 1.20 10 ° 0.090 0.148 0.031 M ax. 1.60 0.56 0.48 0.44 4.60 1.83 M in. 0.055 0.016 0.014 0.014 0.173 0.053 Inches M ax. 0.063 0.022 0.019 0.017 0.181 0.072 0.059 BSC 0.118 B SC 0.102 0.167 0.047 10 ° Copyright  ANPEC Electronics Corp. Rev. B.1 - Apr., 2005 7 www.anpec.com.tw APM3023ND Package Information SOT-223( Reference JEDEC Registration SOT-223) D B1 A c a H E L K e e1 b A1 B Dim A A1 B B1 c D E e e1 H L K α β Min. 1.50 0.02 0.60 2.90 0.28 6.30 3.30 Millimeters Max. 1.80 0.08 0.80 3.10 0.32 6.70 3.70 2.3 BSC 4.6 BSC 6.70 0.91 1.50 0° 7.30 1.10 2.00 10° 0.26 0.04 0.06 0° Min. 0.06 0.02 0.11 0.01 0.25 0.13 Inches Max. 0.07 0.03 0.12 0.01 0.26 0.15 0.09 BSC 0.18 BSC 0.29 0.04 0.08 10° 13° 13° Copyright  ANPEC Electronics Corp. Rev. B.1 - Apr., 2005 8 www.anpec.com.tw APM3023ND Physical Specifications Terminal Material Lead Solderability Solder-Plated Copper (Solder Material : 90/10 or 63/37 SnPb), 100%Sn Meets EIA Specification RSI86-91, ANSI/J-STD-002 Category 3. Reflow Condition (IR/Convection or VPR Reflow) TP R am p-up tp C ritical Zone T L to T P T e m p e ra tu re TL T sm ax tL T sm in R am p-down ts Preheat 25 t 25 °C to Peak T im e Classification Reflow Profiles Profile Feature Average ramp-up rate (TL to TP) Preheat - Temperature Min (Tsmin) - Temperature Max (Tsmax) - Time (min to max) (ts) Time maintained above: - Temperature (TL) - Time (tL) Peak/Classificatioon Temperature (Tp) Time within 5°C of actual Peak Temperature (tp) Ramp-down Rate Sn-Pb Eutectic Assembly 3°C/second max. 100°C 150°C 60-120 seconds 183°C 60-150 seconds See table 1 10-30 seconds Pb-Free Assembly 3°C/second max. 150°C 200°C 60-180 seconds 217°C 60-150 seconds See table 2 20-40 seconds 6°C/second max. 6°C/second max. 6 minutes max. 8 minutes max. Time 25°C to Peak Temperature Notes: All temperatures refer to topside of the package .Measured on the body surface. Copyright  ANPEC Electronics Corp. Rev. B.1 - Apr., 2005 9 www.anpec.com.tw APM3023ND Classification Reflow Profiles(Cont.) T able 1. SnPb Entectic Process – P ackage Peak Reflow Tem peratures 3 3 P ackage Thickness Volum e m m Volum e m m < 350 ≥ 350 < 2.5 m m 240 +0/-5 ° C 225 +0/-5 ° C ≥ 2.5 m m 225 +0/-5 ° C 225 +0/-5 ° C Table 2. Pb-free Process – P ackage Classification Reflow Tem peratures 3 3 3 P ackage Thickness Volum e mm Volum e mm Volum e mm < 350 3 50-2000 > 2000 < 1.6 m m 260 +0 ° C* 260 +0 ° C* 260 +0 ° C* 1 .6 m m – 2 .5 m m 260 +0 ° C* 250 +0 ° C* 245 +0 ° C* ≥ 2.5 m m 250 +0 ° C* 245 +0 ° C* 245 +0 ° C* * Tolerance: The device m anufacturer/supplier s hall a ssure process com patibility up to and including the stated classification tem perature (this m eans Peak reflow tem perature +0 ° C. For exam ple 260 ° C+0 ° C) at the rated MSL level. Reliability Test Program Test item SOLDERABILITY HOLT PCT TST Method MIL-STD-883D-2003 MIL-STD 883D-1005.7 JESD-22-B, A102 MIL-STD 883D-1011.9 Description 245°C,5 SEC 1000 Hrs Bias @ 125°C 168 Hrs, 100% RH, 121°C -65°C ~ 150°C, 200 Cycles Carrier Tape & Reel Dimensions t E Po P P1 D F W Bo Ao D1 Ko Copyright  ANPEC Electronics Corp. Rev. B.1 - Apr., 2005 10 www.anpec.com.tw APM3023ND Carrier Tape & Reel Dimensions(Cont.) T2 J C A B T1 Application A 330±1 B 62±1.5 D 1.5+ 0.1 SOT-223 F 5.5 ± 0.05 C 12.75± 0.15 D1 1.5+ 0.1 J 2 ± 0.6 Po T1 12.4 +0.2 P1 T2 2± 0.2 Ao W 12 ± 0.3 Bo 7.5± 0.1 P 8 ± 0.1 Ko 2.1± 0.1 E 1.75± 0.1 t 0.3±0.05 4.0 ± 0.1 2.0 ± 0.05 6.9 ± 0.1 (mm) Cover Tape Dimensions Application Carrier Width Cover Tape Width Devices Per Reel SOT-223 12 9.3 2500 Customer Service Anpec Electronics Corp. Head Office : 5F, No. 2 Li-Hsin Road, SBIP, Hsin-Chu, Taiwan, R.O.C. Tel : 886-3-5642000 Fax : 886-3-5642050 Taipei Branch : 7F, No. 137, Lane 235, Pac Chiao Rd., Hsin Tien City, Taipei Hsien, Taiwan, R. O. C. Tel : 886-2-89191368 Fax : 886-2-89191369 Copyright  ANPEC Electronics Corp. Rev. B.1 - Apr., 2005 11 www.anpec.com.tw