APM3095UC-TR

APM3095P P-Channel Enhancement Mode MOSFET Features • -30V/-6A , RDS(ON)=95mΩ(typ.) @ VGS=-10V RDS(ON)=140mΩ(typ.) @ VGS=-4.5V Pin Description • • • Super High Dense Cell Design for Extremely Low RDS(ON) Reliable and Rugged TO-252 Package G D S Top View of TO-252 Applications • Power Management in Notebook Computer , Portable Equipment and Battery Powered Systems. D G S D Ordering and Marking Information APM 3095P H a n d lin g C o d e Tem p. R ange P a c ka g e C od e P-Channel MOSFET P ackage C ode U : T O -2 5 2 O p e ra tin g J u n c tio n T e m p . R a n g e C : -5 5 to 1 5 0 ° C H a n d lin g C o d e TU : Tube TR : Tape & Reel A P M 3095P U : A P M 3095P XXXXX X X X X X - D a te C o d e Absolute Maximum Ratings Symbol VDSS VGSS ID* IDM Drain-Source Voltage Gate-Source Voltage Parameter (TA = 25°C unless otherwise noted) Rating -30 ±25 -12 -30 A V Unit Maximum Drain Current – Continuous Maximum Drain Current – Pulsed ANPEC reserves the right to make changes to improve reliability or manufacturability without notice, and advise customers to obtain the latest version of relevant information to verify before placing orders. Copyright  ANPEC Electronics Corp. Rev. A.1 - Oct., 2002 1 www.anpec.com.tw * Surface Mounted on FR4 Board, t ≤ 10 sec. APM3095P Absolute Maximum Ratings Cont. Symbol PD Parameter Maximum Power Dissipation TA=25°C TA=100°C TJ TSTG RθjA Maximum Junction Temperature Storage Temperature Range Thermal Resistance – Junction to Ambient (TA = 25°C unless otherwise noted) Rating 50 20 150 -55 to 150 50 W °C °C °C/W Unit Electrical Characteristics Symbol Static BVDSS IDSS VGS(th) IGSS RDS(ON)a VSDa b (TA = 25°C unless otherwise noted) APM3095P Min. Typ. Max. Parameter Test Condition Unit Drain-Source Breakdown Voltage Zero Gate Voltage Drain Current Gate Threshold Voltage Gate Leakage Current Drain-Source On-state Resistance Diode Forward Voltage VGS=0V , IDS=-250µA VDS=-24V , VGS=0V VDS=VGS , IDS=-250µA VGS=±25V , VDS=0V VGS=-10V , IDS=-6A VGS=-4.5V , IDS=-3A ISD=-1.25A , VGS=0V VDS=-15V , IDS=-3A VGS=-10V VDD=-15V , IDS=-1A , VGEN=-10V , RG=6Ω RL=15Ω VGS=0V -30 -1 -1 -1.5 95 140 -0.7 8 1.9 1.1 10 8 25 5 550 120 75 20 20 50 15 -2 ±100 110 160 -1.3 13 V µA V nA mΩ V Dynamic Qg Total Gate Charge Qgs Qgd td(ON) Tr td(OFF) Tf Ciss Coss Crss Gate-Source Charge Gate-Drain Charge Turn-on Delay Time Turn-on Rise Time Turn-off Delay Time Turn-off Fall Time Input Capacitance nC ns Output Capacitance VDS=-25V Reverse Transfer Capacitance Frequency=1.0MHz pF Notes a b : Pulse test ; pulse width ≤300µs, duty cycle ≤ 2% : Guaranteed by design, not subject to production testing Copyright  ANPEC Electronics Corp. Rev. A.1 - Oct., 2002 2 www.anpec.com.tw APM3095P Typical Characteristics Output Characteristics 10 -VGS=5,6,7,8,9,10V Transfer Characteristics 10 8 8 -V GS=4V -ID-Drain Current (A) 6 -ID-Drain Current (A) 6 4 -V GS=3V 4 TJ=125°C TJ=-55°C TJ=25°C 2 2 0 0 2 4 6 8 10 0 0 1 2 3 4 5 -VDS - Drain-to-Source Voltage (V) -VGS - Gate-to-Source Voltage (V) Threshold Voltage vs. Junction Temperature 1.50 -IDS=250uA On-Resistance vs. Drain Current 0.24 -VGS(th)-Threshold Voltage (V) (Normalized) RDS(ON)-On-Resistance (Ω) 1.25 1.00 0.75 0.50 0.25 0.00 -50 0.21 0.18 -V GS=4.5V 0.15 0.12 0.09 0.06 0.03 0.00 0 1 2 3 4 5 6 7 8 -V GS=10V -25 0 25 50 75 100 125 150 Tj - Junction Temperature (°C) -ID - Drain Current (A) Copyright  ANPEC Electronics Corp. Rev. A.1 - Oct., 2002 3 www.anpec.com.tw APM3095P Typical Characteristics On-Resistance vs. Gate-to-Source Voltage 0.30 -ID=3A On-Resistance vs. Junction Temperature 2.00 -VGS=10V -ID=6A RDS(ON)-On-Resistance (Ω) 0.25 0.20 0.15 0.10 0.05 0.00 RDS(ON)-On-Resistance (Ω) (Normalized) 0 2 4 6 8 10 1.75 1.50 1.25 1.00 0.75 0.50 0.25 0.00 -50 -25 0 25 50 75 100 125 150 -VGS - Gate-to-Source Voltage (V) TJ - Junction Temperature (°C) Gate Charge 10 800 700 -VDS=15V 9 -ID=3A Capacitance Frequency=1MHz -VGS-Gate-Source Voltage (V) 8 7 6 5 4 3 2 1 0 0 1 2 3 4 5 6 7 8 Capacitance (pF) 600 500 400 300 200 100 0 0 5 10 15 Ciss Coss Crss 20 25 30 QG - Gate Charge (nC) -VDS - Drain-to-Source Voltage (V) Copyright  ANPEC Electronics Corp. Rev. A.1 - Oct., 2002 4 www.anpec.com.tw APM3095P Typical Characteristics Source-Drain Diode Forward Voltage 10 250 Single Pulse Power -IS-Source Current (A) 200 Power (W) 1.2 1.4 150 1 TJ=150°C TJ=25°C 100 50 0.1 0.0 0.2 0.4 0.6 0.8 1.0 0 1E-3 0.01 0.1 1 10 100 1000 -VSD -Source-to-Drain Voltage (V) Time (sec) Normalized Thermal Transient Impedence, Junction to Ambient Normalized Effective Transient Thermal Impedance 1 Duty Cycle=0.5 D=0.2 D=0.1 D=0.05 0.1 D=0.02 D=0.01 SINGLE PULSE 1.Duty Cycle, D=t1/t2 2.Per Unit Base=RthJA=50°C/W 3.T JM -T A =P DMZ thJA 0.01 1E-4 1E-3 0.01 0.1 1 10 100 1000 Square Wave Pulse Duration (sec) Copyright  ANPEC Electronics Corp. Rev. A.1 - Oct., 2002 5 www.anpec.com.tw APM3095P Packaging Information TO-252( Reference JEDEC Registration TO-252) E b2 L2 A C1 D H L1 L b e1 C A1 Dim A A1 b b2 C C1 D E e1 H L L1 L2 Mi ll im et er s Min . 2. 1 8 0. 8 9 0. 5 08 5. 2 07 0. 4 6 0. 4 6 5. 3 34 6. 3 5 3. 9 6 9. 3 98 0. 5 1 0. 6 4 0. 8 9 1. 0 2 2. 0 32 6 Inc he s Ma x . 2. 3 9 1. 2 7 0. 8 9 5. 4 61 0. 5 8 0. 5 8 6. 2 2 6. 7 3 5. 1 8 10 . 41 Min . 0. 0 86 0. 0 35 0. 0 20 0. 2 05 0. 0 18 0. 0 18 0. 2 10 0. 2 50 0. 1 56 0. 3 70 0. 0 20 0. 0 25 0. 0 35 0. 0 40 0. 0 80 www.anpec.com.tw Ma x . 0. 0 94 0. 0 50 0. 0 35 0. 2 15 0. 0 23 0. 0 23 0. 2 45 0. 2 65 0. 2 04 0. 4 10 Copyright  ANPEC Electronics Corp. Rev. A.1 - Oct., 2002 APM3095P Physical Specifications Solder-Plated Copper (Solder Material : 90/10 or 63/37 SnPb) Meets EIA Specification RSI86-91, ANSI/J-STD-002 Category 3. Terminal Material Lead Solderability Reflow Condition (IR/Convection or VPR Reflow) Reference JEDEC Standard J-STD-020A APRIL 1999 temperature Peak temperature 183°C Pre-heat temperature Time Classification Reflow Profiles Convection or IR/ Convection Average ramp-up rate(183°C to Peak) Preheat temperature 125 ± 25°C) Temperature maintained above 183°C Time within 5°C of actual peak temperature Peak temperature range Ramp-down rate Time 25°C to peak temperature 3°C/second max. 120 seconds max. 60 ~ 150 seconds 10 ~ 20 seconds 220 +5/-0°C or 235 +5/-0°C 6 °C /second max. 6 minutes max. VPR 10 °C /second max. 60 seconds 215~ 219°C or 235 +5/-0°C 10 °C /second max. Package Reflow Conditions pkg. thickness ≥ 2.5mm and all bags Convection 220 +5/-0 °C VPR 215-219 °C IR/Convection 220 +5/-0 °C pkg. thickness < 2.5mm and pkg. volume ≥ 350 mm³ pkg. thickness < 2.5mm and pkg. volume < 350mm³ Convection 235 +5/-0 °C VPR 235 +5/-0 °C IR/Convection 235 +5/-0 °C www.anpec.com.tw Copyright  ANPEC Electronics Corp. Rev. A.1 - Oct., 2002 7 APM3095P Reliability test program Test item SOLDERABILITY HOLT PCT TST Method MIL-STD-883D-2003 MIL-STD 883D-1005.7 JESD-22-B, A102 MIL-STD 883D-1011.9 Description 245°C,5 SEC 1000 Hrs Bias @ 125°C 168 Hrs, 100% RH, 121°C -65°C ~ 150°C, 200 Cycles Carrier Tape & Reel Dimensions t E Po P P1 D F W Bo Ao D1 T2 Ko J C A B T1 Application A 330 ±3 B 100 ± 2 D 1.5 +0.1 C 13 ± 0. 5 D1 1.5± 0.25 J 2 ± 0.5 Po 4.0 ± 0.1 T1 16.4 + 0.3 -0.2 P1 2.0 ± 0.1 T2 2.5± 0.5 Ao 6.8 ± 0.1 W 16+ 0.3 - 0.1 Bo 10.4± 0.1 P 8 ± 0.1 Ko 2.5± 0.1 E 1.75± 0.1 t 0.3±0.05 TO-252 F 7.5 ± 0.1 Copyright  ANPEC Electronics Corp. Rev. A.1 - Oct., 2002 8 www.anpec.com.tw APM3095P Cover Tape Dimensions Application TO- 252 Carrier Width 16 Cover Tape Width 13.3 Devices Per Reel 2500 Customer Service Anpec Electronics Corp. Head Office : 5F, No. 2 Li-Hsin Road, SBIP, Hsin-Chu, Taiwan, R.O.C. Tel : 886-3-5642000 Fax : 886-3-5642050 Taipei Branch : 7F, No. 137, Lane 235, Pac Chiao Rd., Hsin Tien City, Taipei Hsien, Taiwan, R. O. C. Tel : 886-2-89191368 Fax : 886-2-89191369 Copyright  ANPEC Electronics Corp. Rev. A.1 - Oct., 2002 9 www.anpec.com.tw