APM9435KC-TU

APM9435 P-Channel Enhancement Mode MOSFET Features • • • • -30V/-4.6A, RDS(ON) = 52mΩ(typ.) @ VGS = -10V RDS(ON) = 80mΩ(typ.) @ VGS = -4.5V Super High Density Cell Design Reliable and Rugged SO-8 Package Pin Description S S S G 1 2 3 4 8 7 6 5 D D D D Applications • Power Management in Notebook Computer, Portable Equipment and Battery Powered Systems G SO − 8 S SS Ordering and Marking Information APM 9435 H a n d lin g C o d e Tem p. R ange P ackage C ode DD DD P-Channel MOSFET P ackage C ode K : S O -8 O p e ra tio n J u n c tio n T e m p . R a n g e C : -5 5 to 1 5 0 ° C H a n d lin g C o d e TU : Tube TR : Tape & Reel APM 9435 APM 9435 XXXXX X X X X X - D a te C o d e Absolute Maximum Ratings Symbol VDSS VGSS ID IDM Drain-Source Voltage Gate-Source Voltage Parameter (TA = 25°C unless otherwise noted) Rating -30 ±25 T A = 2 5 °C -4.6 -20 Unit V A Maximum Drain Current – Continuous Maximum Drain Current – Pulsed ANPEC reserves the right to make changes to improve reliability or manufacturability without notice, and advise customers to obtain the latest version of relevant information to verify before placing orders. Copyright  A NPEC Electronics Corp. Rev. A.4 - Mar., 2003 1 www.anpec.com.tw APM9435 Absolute Maximum Ratings Symbol PD T J) T STG R θJA Parameter Maximum Power Dissipation T A = 2 5°C T A = 1 00 °C Maximum Operating and Storage Junction Temperature Thermal Resistance - Junction to Ambient (TA = 25°C unless otherwise noted) Rating 2.5 1.0 -55 to 150 50 Unit W °C °C/W Electrical Characteristics Symbol Static BV DSS IDSS VGS(th) IGSS R DS(ON) VSD Dynamica Qg Q gs Q gd td(ON) tr td(OFF) tf C iss C oss C rss Notes a b (TA = 25°C unless otherwise noted) APM9435 Unit Min. Typ a. Max. -30 -1 -1 -3 ±100 52 80 -0.6 60 95 -1.3 V uA V nA mΩ V Parameter Test Condition Drain-Source Breakdown Voltage Zero Gate Voltage Drain Current Gate Threshold Voltage Gate Leakage Current Drain-Source On-state Resistance Diode Forward Voltage b b V GS=0V, ID =-250 µ A V DS=24V, VGS =0V V DS=VGS, ID=250µ A V GS=±25V, VDS =0V V GS=-10V, ID =-4.6A V GS=-4.5V, ID=-2A ISD=-3A, VGS=0V Total Gate Charge Gate-Source Charge Gate-Drain Charge Turn-on Delay Time Turn-on Rise Time Turn-off Delay Time Turn-off Fall Time Input Capacitance Output Capacitance Reverse Transfer Capacitance V DS=-15V, VGS =-10V, ID=-4.6A V DD=-25V, R L=12.5Ω , ID=-2A , VGEN=-10V, R G=6Ω , V GS=0V, V DS=-25V Frequency = 1.0MHZ 22.5 4.5 2 8 8 35 11 845 120 80 29 nC 17 18 60 28 ns pF : G uaranteed by design, not subject to production testing : Pulse test ; pulse width ≤ 300µ s, duty cycle ≤ 2% Copyright  ANPEC Electronics Corp. Rev. A.4 - Mar., 2003 2 www.anpec.com.tw APM9435 Typical Characteristics Output Characteristics 20 -VGS=5,6,7,8,9,10V -V GS =4V Transfer Characteristics 20 -ID-Drain Current (A) 10 -V GS=3V -ID-Drain Current (A) 15 15 10 TJ=25°C 5 5 TJ=125°C TJ=-55°C 0 0 2 4 6 8 10 0 0 1 2 3 4 5 -VDS - Drain-to-Source Voltage (V) -VGS - Gate-to-Source Voltage (V) Threshold Voltage vs. Junction Temperature 1.50 -IDS=250µA On-Resistance vs. Drain Current 0.16 0.14 -VGS(th)-Threshold Voltage (V) (Normalized) RDS(on)-On-Resistance (Ω) 1.25 1.00 0.75 0.50 0.25 0.00 -50 0.12 0.10 0.08 0.06 0.04 0.02 -V GS=10V -VGS=4.5V -25 0 25 50 75 100 125 150 0.00 0.0 2.5 5.0 7.5 10.0 12.5 15.0 17.5 20.0 Tj - Junction Temperature (°C) -ID - Drain Current (A) Copyright  ANPEC Electronics Corp. Rev. A.4 - Mar., 2003 3 www.anpec.com.tw APM9435 Typical Characteristics On-Resistance vs. Gate-to-Source Voltage 0.30 -ID=4.6A On-Resistance vs. Junction Temperature 2.00 -VGS=10V -ID=4.6A RDS(on)-On-Resistance (Ω) RDS(on)-On-Resistance (Ω) (Normalized) 1 2 3 4 5 6 7 8 9 10 0.25 0.20 0.15 0.10 0.05 0.00 1.75 1.50 1.25 1.00 0.75 0.50 0.25 0.00 -50 -25 0 25 50 75 100 125 150 -VGS - Gate-to-Source Voltage (V) TJ - Junction Temperature (°C) Gate Charge 10 Capacitance 1200 Frequency=1MHz -VGS-Gate-Source Voltage (V) -V DS =15V -IDS=4.6A 8 1000 Ciss Capacitance (pF) 800 600 400 200 0 Coss Crss 6 4 2 0 0 5 10 15 20 25 0 5 10 15 20 25 30 QG - Gate Charge (nC) -VDS - Drain-to-Source Voltage (V) Copyright  ANPEC Electronics Corp. Rev. A.4 - Mar., 2003 4 www.anpec.com.tw APM9435 Typical Characteristics Source-Drain Diode Forward Voltage 20 Single Pulse Power 80 70 60 10 -IS-Source Current (Α) Power (W) 50 40 30 20 10 1 TJ=150°C TJ=25°C 0.1 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 0 0.01 0.1 1 10 30 -VSD-Source-to-Drain Voltage (V ) Time (sec) Normalized Thermal Transient Impedence, Junction to Ambient Normalized Effective Transient Thermal Impedance 1 Duty Cycle = 0.5 D= 0.2 D= 0.1 0.1 D= 0.05 1.Duty Cycle, D=t1/t2 2.Per Unit Base=RthJA=50°C/W 3.TJM-TA=PDMZthJA 4.Surface Mounted D= 0.02 SINGLE PULSE 0.01 1E-4 1E-3 0.01 0.1 1 10 30 Square Wave Pulse Duration (sec) Copyright  ANPEC Electronics Corp. Rev. A.4 - Mar., 2003 5 www.anpec.com.tw APM9435 Packaging Information SOP-8 pin ( Reference JEDEC Registration MS-012) E H e1 D e2 A1 A 1 L 0.004max. Dim A A1 D E H L e1 e2 φ1 Mi ll im et er s Min . 1. 35 0. 10 4. 80 3. 80 5. 80 0. 40 0. 33 1. 27B S C 8° Max . 1. 75 0. 25 5. 00 4. 00 6. 20 1. 27 0. 51 Min. 0. 053 0. 004 0. 189 0. 150 0. 228 0. 016 0. 013 0.015X45 Inche s Max . 0. 069 0. 010 0. 197 0. 157 0. 244 0. 050 0. 020 0. 50B S C 8° Copyright  ANPEC Electronics Corp. Rev. A.4 - Mar., 2003 6 www.anpec.com.tw APM9435 Physical Specifications Terminal Material Lead Solderability Solder-Plated Copper (Solder Material : 90/10 or 63/37 SnPb) Meets EIA Specification RSI86-91, ANSI/J-STD-002 Category 3. Reflow Condition (IR/Convection or VPR Reflow) temperature Peak temperature 183°C Pre-heat temperature Time Classification Reflow Profiles Convection or IR/ Convection Average ramp-up rate(183°C to Peak) 3°C/second max. 120 seconds max Preheat temperature 125 ± 25°C) 60 – 150 seconds Temperature maintained above 183°C Time within 5°C of actual peak temperature 10 –20 seconds Peak temperature range 220 +5/-0°C or 235 +5/-0°C Ramp-down rate 6 °C /second max. 6 minutes max. Time 25°C to peak temperature VPR 10 °C /second max. 60 seconds 215-219°C or 235 +5/-0°C 10 °C /second max. Package Reflow Conditions pkg. thickness ≥ 2.5mm and all bgas Convection 220 +5/-0 °C VPR 215-219 °C IR/Convection 220 +5/-0 °C pkg. thickness < 2.5mm and pkg. volume ≥ 350 mm³ pkg. thickness < 2.5mm and pkg. volume < 350mm³ Convection 235 +5/-0 °C VPR 235 +5/-0 °C IR/Convection 235 +5/-0 °C www.anpec.com.tw Copyright  ANPEC Electronics Corp. Rev. A.4 - Mar., 2003 7 APM9435 Reliability test program Test item SOLDERABILITY HOLT PCT TST Method MIL-STD-883D-2003 MIL-STD 883D-1005.7 JESD-22-B, A102 MIL-STD 883D-1011.9 Description 245°C,5 SEC 1000 Hrs Bias @ 125°C 168 Hrs, 100% RH, 121°C -65°C ~ 150°C, 200 Cycles Carrier Tape & Reel Dimensions E Po P P1 D t F W Bo Ao D1 T2 Ko J C A B T1 Application A 330 ± 1 B 62 +1.5 D C 12.75+ 0.15 D1 J 2 ± 0.5 Po T1 12.4 ± 0.2 P1 T2 2 ± 0.2 Ao W 12± 0. 3 Bo 5.2± 0. 1 P 8± 0.1 Ko E 1.75±0.1 t SOP- 8 F 5.5± 1 1.55 +0.1 1.55+ 0.25 4.0 ± 0.1 2.0 ± 0.1 6.4 ± 0.1 2.1± 0.1 0.3±0.013 Copyright  ANPEC Electronics Corp. Rev. A.4 - Mar., 2003 8 www.anpec.com.tw APM9435 Cover Tape Dimensions Application SOP- 8 Carrier Width 12 Cover Tape Width 9.3 Devices Per Reel 2500 Customer Service Anpec Electronics Corp. Head Office : 5F, No. 2 Li-Hsin Road, SBIP, Hsin-Chu, Taiwan, R.O.C. Tel : 886-3-5642000 Fax : 886-3-5642050 Taipei Branch : 7F, No. 137, Lane 235, Pac Chiao Rd., Hsin Tien City, Taipei Hsien, Taiwan, R. O. C. Tel : 886-2-89191368 Fax : 886-2-89191369 Copyright  ANPEC Electronics Corp. Rev. A.4 - Mar., 2003 9 www.anpec.com.tw