APX8131AI-TRG

APX8131 Hall Effect Micro Switch IC Features • • • General Description The APX8131, integrated circuit, is an ultra-sensitive, pole independent Hall-effect switch with a latched digital output. Micro Power Operation for Battery Applications Chopper Stabilized Amplifier A 2.5 volt to 3.5 volt operation and an unique clocking s c h e m e r e d u c e t h e a ve r a g e o p e r a t i n g p o we r Independent of North or South Pole Magnet, Easy for Manufacture • • requirements, either a north or south pole of sufficient flux will turn the output on; in the absence of a magnetic Small Size Package Lead Free and Green Devices Available field, the output is off. The polarity independence and minimal power requirement allow this device to be easily (RoHS Compliant) replaced reed switch for superior for signal conditioning. Advanced CMOS processing is used to take advantage of Applications • • • • low-voltage and low-power requirements, SOT-23 package provided a optimized package for most applications. Micro Switch Pin Configuration Handheld Wireless Application Wake Up Switch GND Clamp Shell Type Application Switch Magnet Switch in Low Duty Cycle Applications APX8131 VOUT VDD SOT-23 Ordering and Marking Information Package Code A : SOT-23 Operating Ambient Temperature Range I : -40 to 85 oC Handling Code TR : Tape & Reel Assembly Material G : Halogen and Lead Free Device APX8131 Assembly Material Handling Code Temperature Range Package Code APX8131 A: X - Date Code X31X Note: ANPEC lead-free products contain molding compounds/die attach materials and 100% matte tin plate termination finish; which are fully compliant with RoHS. ANPEC lead-free products meet or exceed the lead-free requirements of IPC/JEDEC J-STD-020D for MSL classification at lead-free peak reflow temperature. ANPEC defines “Green” to mean lead-free (RoHS compliant) and halogen free (Br or Cl does not exceed 900ppm by weight in homogeneous material and total of Br and Cl does not exceed 1500ppm by weight). ANPEC reserves the right to make changes to improve reliability or manufacturability without notice, and advise customers to obtain the latest version of relevant information to verify before placing orders. Copyright  ANPEC Electronics Corp. Rev. A.1 - Aug., 2014 1 www.anpec.com.tw APX8131 Absolute Maximum Ratings Symbol (Note1) (TA = 25°C unless otherwise noted) Parameter Rating Unit VDD Supply Voltage 5 V VOUT Output Voltage 5 V TJ Junction Temperature Range 150 TSTG Storage Temperature Range -65 to +150 °C Note1: Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Thermal Characteristics Symbol θJA θJC PD Parameter Typical Value Unit Junction-to-Ambient Resistance in Free Air (Note 2) ο SOT-23 260 SOT-23 145 SOT-23 0.385 C/W Junction-to-Case Resistance in Free Air (Note 2) ο C/W Power Dissipation, TA=25oC W Note 2: θJA is measured with the component mounted on a high effective thermal conductivity test board in free air. Electrical Characteristics (TA = 25°C, VDD=3V unless otherwise noted) APX8131 Symbol VDD IDD Characteristic Supply Voltage Range Supply Current Test Conditions Unit Min. Typ. Max. 2.5 - 3.5 V Average - 5 10 µA Awake - 1.2 2 mA Sleep - 2 8 µA Operating IOFF Output Leakage Current VOUT = 3.5V, BRPN