APX9131AI-PBG

APX9131 Hall Effect Micro Switch IC Features • • • • • Micro Power Operation for Battery Applications Chopper Stabilized Amplifier Independent of North or South Pole Magnet, Easy for Manufacture Small Size Package Lead Free and Green Devices Available (RoHS Compliant) General Description The APX9131, integrated circuit, is an ultra-sensitive, pole independent Hall-effect switch with a latched digital output. A 2.5 volt to 3.5 volt operation and an unique clocking s c h e m e r e d u c e t h e a ve r a g e o p e r a t i n g p o we r requirements, either a north or south pole of sufficient flux will turn the output on; in the absence of a magnetic field, the output is off. The polarity independence and minimal power requirement allow this device to be easily replaced reed switch for superior for signal conditioning. Advanced CMOS processing is used to take advantage of low-voltage and low-power requirements, SOT-23-3, TSOT-23-3, and TO-92M3 packages provided an optimized package for most applications. Applications • • • • Micro Switch Handheld Wireless Application Wake Up Switch Clamp Shell Type Application Switch Magnet Switch in Low Duty Cycle Applications Pin Configuration GND APX9131 1 : VDD 2 : GND 3 : VOUT VDD VOUT 1 2 3 SOT-23-3 Ordering and Marking Information APX9131 Assembly Material Handling Code Temperature Range Package Code APX9131 A/AT: APX9131 E: X31X APX9131 XXXXX TSOT-23-3 TO-92M3 Front View Package Code A : SOT-23-3 AT : TSOT-23-3 E : TO-92M3 Operating Ambient Temperature Range I : -40 to 85 oC Handling Code TR : Tape & Reel PB : Plastic Bag Assembly Material G : Halogen and Lead Free Device X - Date Code XXXXX - Date Code Note: ANPEC lead-free products contain molding compounds/die attach materials and 100% matte tin plate termination finish; which are fully compliant with RoHS. ANPEC lead-free products meet or exceed the lead-free requirements of IPC/JEDEC J-STD-020D for MSL classification at lead-free peak reflow temperature. ANPEC defines “Green” to mean lead-free (RoHS compliant) and halogen free (Br or Cl does not exceed 900ppm by weight in homogeneous material and total of Br and Cl does not exceed 1500ppm by weight). ANPEC reserves the right to make changes to improve reliability or manufacturability without notice, and advise customers to obtain the latest version of relevant information to verify before placing orders. C opyright © A NPEC Electronics Corp. Rev. A.12 - Aug., 2009 1 www.anpec.com.tw APX9131 Absolute Maximum Ratings Symbol VDD VOUT TJ TSTG Supply Voltage Output Voltage Junction Temperature Range Storage Temperature Range (TA = 25°C unless otherwise noted) Rating 5 5 150 -65 to +150 Unit V V °C Parameter Electrical Characteristics Symbol VDD Characteristic Supply Voltage Range (TA = 25°C, VDD=3V unless otherwise noted) APX9131 Test Conditions Min. Operating Average 2.5 Typ. 5 1.2 2 20 180 60 0.3 11 Max. 3.5 10 2 8 1.0 40 120 V µA mA µA µA mV µs ms % kHz Unit IDD Supply Current Awake Sleep IOFF VOL tawake tperiod d.c. fc Output Leakage Current Output Low Voltage Wake Up Time Period Duty Cycle Chopping Frequency VOUT = 3.5V, BRPN