APX9132ATI-TR

APX9132 Hall Effect Micro Switch IC Features • • • • • Micro Power Operation for Battery Applications Chopper Stabilized Amplifier Independent of North or South Pole Magnet, Easy for Manufacture Small Size Package Lead Free Available (RoHS Compliant) General Description The APX9132 integrated circ uit is an ultra-sensit ive, pole independent Hall-effect switch with a latched digital output . A 2.5 volt t o 3.5 volt operation and a unique clocking scheme reduce the average operating power requirements, Either a north or sout h pole of sufficient flux will turn the output on; in the absence of a magnetic field, t he out put is off. The polarit y independence and minimal power requirement allow t his devic e t o be easily replac ed reed swit c h for s uperior for s ignal c ondit ioning. A dvanc ed CMOS proc es s ing is used to take advantage of low-voltage and low-power requirements, SOT-23 package provided a optimized package for most applications. Applications • • • • Micro Switch Handheld Wireless Application Wake Up Switch Clamp Shell Type Application Switch Magnet Switch in Low Duty Cycle Applications Pin Description GND APX9132 VDD VOUT Ordering Information APX9132 Lead Free Code Handling Code Temp. Range Package Code SOT-23 Package Code A : SOT-23 AT : SOT-23 Thin Temp. Range I : -40 to 85° C Handling Code TR : Tape & Reel Lead Free Code L : Lead Free Device Blank : Original Device X: Date Code APX9132 A/AT: X32X No tes : ANPEC lea d-free p rod ucts contai n m old ing co mp oun ds/die attach materi als and 100 % m atte in pla te te rmin atio n fi nish ; wh ich are full y compl iant with Ro HS and compa tibl e wi th both SnPb an d le ad-free sold ieri ng op era tio ns. AN PEC le ad-free produ cts me et or exceed th e l ead -free req uireme nts of IPC /JEDEC J STD -02 0C fo r MSL classi ficati on at lea d-fre e p eak re flo w temp era ture. ANPEC reserves the right to make changes to improve reliability or manufacturability without notice, and advise customers to obtain the latest version of relevant information to verify before placing orders. C opyright © A NPEC Electronics C orp. Rev. A.1 - Nov., 2005 1 www.anpec.com.tw APX9132 Function Pin Descriptions No 1 2 3 Name VDD VOUT GND Function Power Input When a magnetic field enters the hall element and exceeds the OPS ( or less than B OPN ) the output turns on (output is operate point B low). When the magnetic field is below the release point BRPS (or above BRPN ), the output turns off (output is high). Ground Connection Block Diagram VDD Awake & Sleep Timing Logic Hall Plane Dynamic Offset Cancellation L atch Circuit VOUT Chopper Amplifier Hysteresis Control GND Typical Applications VOUT VDD + 2.5V-3.5V 0.1uF APX9132 GND - SOT-23 (Top View) C opyright © A NPEC Electronics C orp. Rev. A.1 - Nov., 2005 2 www.anpec.com.tw APX9132 Absolute Maximum Ratings Symbol VDD VOUT IOUT TJ TSTG Supply Voltage Output Voltage Output Current Junction Temperature Range Storage Temperature Range Parameter TA = 25°C unless otherwise noted Rating 5 5 ±1 150 -65 to +150 Unit V V mA °C Electrical Characteristics Symbol VDD IDD IOFF VOH VOL tawake tperiod d.c. fc Characteristic Supply Voltage Range Supply Current TA = 25°C, VDD=3V unless otherwise noted Test Condition Operating Average Awake Sleep VOUT=3.5V, B RPN 2KV, VMM > 200V 10ms , Itr > 1 00mA Carrier Tape & Reel Dimensions t P P1 D Po E F W Bo Ao Ko D1 C opyright © A NPEC Electronics C orp. Rev. A.1 - Nov., 2005 10 www.anpec.com.tw APX9132 Carrier Tape & Reel Dimensions(Cont.) T2 J C A B T1 Application A 178±1 B 60 ± 1.0 D C 12.0 D1 φ0.1MIN C 12.0 D1 φ 1.1 ±0.1 J 2.5 ± 0.15 Po 4.0 J 2.5 ± 0.15 Po 4.0 ±0.1 T1 9.0 ± 0.5 P1 2.0 ± 0.05 T1 9.0 ± 0.5 P1 2.0 ± 0.05 T2 1.4 Ao 3.1 T2 1.4 Ao 3 .3±0.1 SOT-23 Application F W 8.0+ 0.3 - 0.3 Bo 3.0 W 8.0+ 0.2 Bo 3 .2±0.1 P 4.0 Ko 1.3 P 4.0 ±0.1 Ko 1 .1±0.1 E 1.75 t 0.2 ±0.03 E 1.75±0.1 t 0.25±0.05 3.5 ± 0.05 1.5 +0.1 A B 178±1 60 ± 1.0 SOT-23 Thin D φ1.55+ 3.5 ± 0.05 0.05 F (mm) Cover Tape Dimensions Application SOT- 23 SOT- 23 Thin Carrier Width 8 8 Cover Tape Width 5.3 5.3 Devices Per Reel 3000 3000 (mm) Customer Service Anpec Electronics Corp. Head Office : No.6, Dusing 1st Road, SBIP, Hsin-Chu, Taiwan, R.O.C. Tel : 886-3-5642000 Fax : 886-3-5642050 Taipei Branch : 7F, No. 137, Lane 235, Pac Chiao Rd., Hsin Tien City, Taipei Hsien, Taiwan, R. O. C. Tel : 886-2-89191368 Fax : 886-2-89191369 C opyright © A NPEC Electronics C orp. Rev. A.1 - Nov., 2005 11 www.anpec.com.tw