AON6358

AON6358 30V N-Channel MOSFET General Description Product Summary VDS • Trench Power αMOS Technology • Low RDS(ON) • Low Gate Charge • High Current Capability • RoHS and Halogen-Free Compliant Applications ID (at VGS=10V) 30V 85A RDS(ON) (at VGS=10V) < 2.2mΩ RDS(ON) (at VGS=4.5V) < 3.6mΩ 100% UIS Tested 100% Rg Tested • DC/DC Converters in Computing • Isolated DC/DC Converters in Telecom and Industrial DFN5X6 Top View D Top View Bottom View 1 8 2 7 3 6 4 5 G PIN1 PIN1 PIN1 S Orderable Part Number Package Type Form Minimum Order Quantity AON6358 DFN 5x6 Tape & Reel 3000 Absolute Maximum Ratings TA=25°C unless otherwise noted Parameter Drain-Source Voltage Symbol VDS Gate-Source Voltage C C Avalanche energy L=0.05mH VDS Spike 10µs TC=25°C Power Dissipation B TC=100°C Power Dissipation A TA=70°C C Thermal Characteristics Parameter Maximum Junction-to-Ambient A Maximum Junction-to-Ambient A D Maximum Junction-to-Case Rev. 1.0: December 2014 IAS 50 A EAS 63 mJ VSPIKE 36 V 48 Steady-State Steady-State W 19 6.2 W 4 TJ, TSTG Symbol t ≤ 10s A 34 PDSM Junction and Storage Temperature Range A 42 PD TA=25°C V 230 IDSM TA=70°C ±20 67 IDM TA=25°C Continuous Drain Current Units V 85 ID TC=100°C Pulsed Drain Current Avalanche Current VGS TC=25°C Continuous Drain Current G Maximum 30 RθJA RθJC -55 to 150 Typ 15 40 2.1 www.aosmd.com °C Max 20 50 2.6 Units °C/W °C/W °C/W Page 1 of 6 Electrical Characteristics (TJ=25°C unless otherwise noted) Symbol Parameter STATIC PARAMETERS BVDSS Drain-Source Breakdown Voltage Conditions Min ID=250µA, VGS=0V Typ Zero Gate Voltage Drain Current IGSS VGS(th) Gate-Body leakage current VDS=0V, VGS=±20V Gate Threshold Voltage VDS=VGS, ID=250µA V 1 TJ=55°C 1.4 ±100 nA 1.8 2.2 V 1.8 2.2 2.6 3.2 3.6 RDS(ON) Static Drain-Source On-Resistance VGS=4.5V, ID=20A 2.8 gFS Forward Transconductance VDS=5V, ID=20A 91 VSD Diode Forward Voltage IS=1A,VGS=0V IS Maximum Body-Diode Continuous Current TJ=125°C 0.67 DYNAMIC PARAMETERS Input Capacitance Ciss Output Capacitance Crss Reverse Transfer Capacitance Rg Gate resistance VGS=0V, VDS=15V, f=1MHz mΩ S 1 V 60 A 2200 pF 1000 pF 100 pF 1.9 2.9 Ω 33 47 nC Qg(4.5V) Total Gate Charge 15 21 Gate Source Charge Qgd tD(on) tr Turn-On Rise Time tD(off) Turn-Off DelayTime tf trr Turn-Off Fall Time Qrr VGS=10V, VDS=15V, ID=20A 0.9 mΩ SWITCHING PARAMETERS Qg(10V) Total Gate Charge Qgs f=1MHz µA 5 VGS=10V, ID=20A Coss Units 30 VDS=30V, VGS=0V IDSS Max nC 6.7 nC Gate Drain Charge 4.7 nC Turn-On DelayTime 9.5 ns VGS=10V, VDS=15V, RL=0.75Ω, RGEN=3Ω 3.5 ns 30 ns 6 ns IF=20A, dI/dt=500A/µs 17 Body Diode Reverse Recovery Charge IF=20A, dI/dt=500A/µs 42 ns nC Body Diode Reverse Recovery Time A. The value of RθJA is measured with the device mounted on 1in2 FR-4 board with 2oz. Copper, in a still air environment with TA =25°C. The Power dissipation PDSM is based on R θJA t≤ 10s and the maximum allowed junction temperature of 150°C. The value in any given application depends on the user's specific board design. B. The power dissipation PD is based on TJ(MAX)=150°C, using junction-to-case thermal resistance, and is more useful in setting the upper dissipation limit for cases where additional heatsinking is used. C. Single pulse width limited by junction temperature TJ(MAX)=150°C. D. The RθJA is the sum of the thermal impedance from junction to case RθJC and case to ambient. E. The static characteristics in Figures 1 to 6 are obtained using or equal to 4.5V Figure 9: Maximum Forward Biased Safe Operating Area (Note F) 100 0 1E-05 0.0001 0.001 0.01 0.1 1 10 100 Pulse Width (s) Figure 10: Single Pulse Power Rating Junction-toCase (Note F) ZθJC Normalized Transient Thermal Resistance 10 D=Ton/T TJ,PK=TC+PDM.ZθJC.RθJC In descending order D=0.5, 0.3, 0.1, 0.05, 0.02, 0.01, single pulse RθJC=2.6°C/W 1 0.1 PD Single Pulse Ton T 0.01 1E-05 0.0001 0.001 0.01 0.1 1 10 100 Pulse Width (s) Figure 11: Normalized Maximum Transient Thermal Impedance (Note F) Rev. 1.0: December 2014 www.aosmd.com Page 4 of 6 60 100 45 75 Current rating ID(A) Power Dissipation (W) TYPICAL ELECTRICAL AND THERMAL CHARACTERISTICS 30 15 50 25 0 0 0 25 50 75 100 125 150 0 25 TCASE (°C) Figure 12: Power De-rating (Note F) 50 75 100 125 150 TCASE (°C) Figure 13: Current De-rating (Note F) 10000 TA=25°C Power (W) 1000 100 10 1 1E-05 0.001 0.1 10 1000 ZθJA Normalized Transient Thermal Resistance Pulse Width (s) Figure 14: Single Pulse Power Rating Junction-to-Ambient (Note H) 10 1 D=Ton/T TJ,PK=TA+PDM.ZθJA.RθJA RθJA=50°C/W In descending order D=0.5, 0.3, 0.1, 0.05, 0.02, 0.01, single pulse 0.1 0.01 PD Single Pulse Ton 0.001 0.0001 0.001 0.01 0.1 1 10 T 100 1000 Pulse Width (s) Figure 15: Normalized Maximum Transient Thermal Impedance (Note H) Rev. 1.0: December 2014 www.aosmd.com Page 5 of 6 Gate Charge Test Circuit & Waveform Vgs Qg 10V + + Vds VDC - Qgs Qgd VDC - DUT Vgs Ig Charge Resistive Switching Test Circuit & Waveforms RL Vds Vds DUT Vgs 90% + Vdd VDC - Rg 10% Vgs Vgs td(on) tr td(off) ton tf toff Unclamped Inductive Switching (UIS) Test Circuit & Waveforms L 2 EAR= 1/2 LIAR Vds BVDSS Vds Id + Vdd Vgs Vgs I AR VDC - Rg Id DUT Vgs Vgs Diode Recovery Test Circuit & Waveforms Q rr = - Idt Vds + DUT Vds - Isd Vgs Ig Rev. 1.0: December 2014 Vgs L Isd + Vdd t rr dI/dt I RM Vdd VDC - IF Vds www.aosmd.com Page 6 of 6