AON6578

AON6578 30V N-Channel AlphaMOS General Description Product Summary • Latest Trench Power AlphaMOS (αMOS LV) technology • Very Low RDS(on) at 4.5VGS • Low Gate Charge • High Current Capability • RoHS and Halogen-Free Compliant Application • DC/DC Converters in Computing, Servers, and POL • Isolated DC/DC Converters in Telecom and Industrial VDS RDS(ON) (at VGS=10V) < 4.4mΩ RDS(ON) (at VGS = 4.5V) < 7.8mΩ 100% UIS Tested 100% Rg Tested DFN5X6 Top View 30V 70A ID (at VGS=10V) D Top View Bottom View 1 8 2 7 3 6 4 5 G S PIN1 Absolute Maximum Ratings TA=25°C unless otherwise noted Parameter Symbol Drain-Source Voltage VDS Gate-Source Voltage VGS TC=25°C Continuous Drain Current Pulsed Drain Current Continuous Drain Current C V A 180 28 IDSM TA=70°C ±20 45 IDM TA=25°C Units V 70 ID TC=100°C Maximum 30 A 23 Avalanche Current C IAS 34 A Avalanche energy L=0.05mH C EAS 29 mJ VDS Spike VSPIKE 36 V Power Dissipation B 100ns TC=25°C PD TC=100°C TA=25°C Power Dissipation A Junction and Storage Temperature Range Rev.1.0: August 2013 5.6 Steady-State Steady-State RθJA RθJC W 3.6 TJ, TSTG Symbol t ≤ 10s W 14 PDSM TA=70°C Thermal Characteristics Parameter Maximum Junction-to-Ambient A Maximum Junction-to-Ambient A D Maximum Junction-to-Case 35 -55 to 150 Typ 18 40 2.75 www.aosmd.com °C Max 22 55 3.5 Units °C/W °C/W °C/W Page 1 of 6 AON6578 Electrical Characteristics (TJ=25°C unless otherwise noted) Symbol Parameter STATIC PARAMETERS BVDSS Drain-Source Breakdown Voltage Conditions Min ID=250µA, VGS=0V Zero Gate Voltage Drain Current IGSS Gate-Body leakage current VDS=0V, VGS=±20V VGS(th) Gate Threshold Voltage VDS=VGS, ID=250µA RDS(ON) Static Drain-Source On-Resistance VGS=10V, ID=20A TJ=125°C VGS=4.5V, ID=20A gFS Forward Transconductance VSD Diode Forward Voltage IS=1A,VGS=0V IS Maximum Body-Diode Continuous Current DYNAMIC PARAMETERS Ciss Input Capacitance Output Capacitance Crss Reverse Transfer Capacitance Rg Gate resistance VGS=0V, VDS=15V, f=1MHz f=1MHz 0.8 SWITCHING PARAMETERS Qg(10V) Total Gate Charge Qg(4.5V) Total Gate Charge Qgs Gate Source Charge Qgd tD(on) VGS=10V, VDS=15V, ID=20A µA 5 1.6 Units V 1 TJ=55°C VDS=5V, ID=20A Max 30 VDS=30V, VGS=0V IDSS Coss Typ ±100 nA 2 2.4 V 3.6 4.4 5 6 6.2 7.8 68 0.7 mΩ mΩ S 1 V 40 A 1340 pF 570 pF 90 pF 1.6 2.4 Ω 19.5 30 nC 9 15 nC 4.2 nC Gate Drain Charge 4 nC Turn-On DelayTime 7 ns tr Turn-On Rise Time tD(off) Turn-Off DelayTime tf Turn-Off Fall Time trr Body Diode Reverse Recovery Time Qrr Body Diode Reverse Recovery Charge IF=20A, dI/dt=500A/µs VGS=10V, VDS=15V, RL=0.75Ω, RGEN=3Ω IF=20A, dI/dt=500A/µs 7 ns 21.5 ns 5.5 ns 14 ns nC 20.5 A. The value of RθJA is measured with the device mounted on 1in2 FR-4 board with 2oz. Copper, in a still air environment with TA =25°C. The Power dissipation PDSM is based on R θJA t≤ 10s and the maximum allowed junction temperature of 150°C. The value in any given application depends on the user's specific board design. B. The power dissipation PD is based on TJ(MAX)=150°C, using junction-to-case thermal resistance, and is more useful in setting the upper dissipation limit for cases where additional heatsinking is used. C. Single pulse width limited by junction temperature TJ(MAX)=150°C. D. The RθJA is the sum of the thermal impedance from junction to case RθJC and case to ambient. E. The static characteristics in Figures 1 to 6 are obtained using or equal to 4.5V Figure 9: Maximum Forward Biased Safe Operating Area (Note F) Zθ JC Normalized Transient Thermal Resistance 10 D=Ton/T TJ,PK=TC+PDM.ZθJC.RθJC In descending order D=0.5, 0.3, 0.1, 0.05, 0.02, 0.01, single pulse RθJC=3.5°C/W 1 35 0.1 PD Single Pulse Ton T 0.01 1E-05 0.0001 0.001 0.01 0.1 1 10 100 Pulse Width (s) Figure 11: Normalized Maximum Transient Thermal Impedance (Note F) Rev.1.0: August 2013 www.aosmd.com Page 4 of 6 AON6578 TYPICAL ELECTRICAL AND THERMAL CHARACTERISTICS 80 40 Current rating ID(A) Power Dissipation (W) 50 30 20 10 60 40 20 0 0 0 25 50 75 100 125 TCASE (° °C) Figure 12: Power De-rating (Note F) 150 0 25 50 75 100 125 TCASE (° °C) Figure 13: Current De-rating (Note F) 150 10000 TA=25°C Power (W) 1000 100 10 1 1E-05 0.001 0.1 10 1000 Pulse Width (s) Figure 14: Single Pulse Power Rating Junction-to-Ambient (Note H) Zθ JA Normalized Transient Thermal Resistance 10 D=Ton/T TJ,PK=TA+PDM.ZθJA.RθJA 1 In descending order D=0.5, 0.3, 0.1, 0.05, 0.02, 0.01, single pulse 40 RθJA=55°C/W 0.1 35 PD Single Pulse 0.01 Ton T 0.001 1E-05 0.0001 0.001 0.01 0.1 1 10 100 1000 Pulse Width (s) Figure 15: Normalized Maximum Transient Thermal Impedance (Note H) Rev.1.0: August 2013 www.aosmd.com Page 5 of 6 AON6578 Gate Charge Test Circuit & Waveform Vgs Qg 10V + + Vds VDC - Qgs Qgd VDC - DUT Vgs Ig Charge Resistive Switching Test Circuit & Waveforms RL Vds Vds 90% + Vdd DUT Vgs VDC - Rg 10% Vgs Vgs t d(on) tr t d(off) t on tf toff Unclamped Inductive Switching (UIS) Test Circuit & Waveforms L 2 E AR = 1/2 LIAR Vds BVDSS Vds Id + Vdd Vgs Vgs I AR VDC - Rg Id DUT Vgs Vgs Diode Recovery Test Circuit & Waveforms Q rr = - Idt Vds + DUT Vds Isd Vgs Ig Rev.1.0: August 2013 Vgs L Isd + Vdd t rr dI/dt I RM Vdd VDC - IF Vds www.aosmd.com Page 6 of 6