AOZ6186QT#A

General Description Features The AOZ6186 is a low-voltage high-speed Double-Pole, Double-Throw (DPDT) switch for switching between two USB 2.0 (480 Mbps) sources. The device features very low on capacitance (5 pF typ.) and is designed to operate from a single 1.65 V to 4.5 V supply. The AOZ6186 features an ultra-low on resistance (7 typ.), and low power consumption. The device also features fast switching and guaranteed Break-Before-Make (BBM) switching, assuring the switches never short the driver. Low On Resistance (RON) for 3.6 V supply (7 ) Low On Capacitance (CON) for 3.6 V supply (5 pF) Over-voltage tolerance (OVT) on all data ports up to 5.5 V QFN-10: 1.8 mm x 1.4 mm x 0.55 mm Broad 1.65 V to 4.50 V VCC operating range Wide –3 dB bandwidth: 960 MHz typ. Applications Cell phone PDA Portable media player Typical Application ( ( ( (z (z (z 'SRXVSP 3) 7 Rev. 1.1 July 2011 www.aosmd.com Page 1 of 10 AOZ6186 Ordering Information Part Number Ambient Temperature Range Package Environmental AOZ6186QT -40 °C to +85 °C QFN-10 Green Product AOS Green Products use reduced levels of Halogens, and are also RoHS compliant. Please visit www.aosmd.com/web/quality/rohs_compliant.jsp for additional information. Pin Configuration 3)  :''  7  Pin Description (z (z   'SRXVSP   ( ( Pin Name  (z  +2(  ( Function S Control Input OE Output Enable D1+, D1–, D2+, D2–, D+, D- Data Ports Truth Table 5*2 8ST8LVY:MI[ OE S D1+, D1– D2+, D2– 1 X Off Off 0 0 On Off 0 1 Off On Absolute Maximum Ratings Exceeding the Absolute Maximum Ratings may damage the device. Symbol Parameter Rating VCC Supply Voltage -0.5 V to +5.5 V VS Switch Voltage -0.5 V to V CC + 0.3 V VIN Input Voltage -0.5 V to +4.6 V IIK Minimum Input Diode Current -50 mA ISW Switch Current 100 mA TSTG TJ TL ESD Rev. 1.1 July 2011 Storage Temperature Range -65 °C to +150 °C Maximum Junction Temperature +150 °C Lead Temperature (Soldering, 10 seconds) Human Body Model www.aosmd.com +260 °C All Pins 3000 V I/O to GND 5000 V Power to GND 5000 V Page 2 of 10 AOZ6186 Maximum Operating Conditions The device is not guaranteed to operate beyond the Maximum Operating Conditions. Symbol Parameter VCC Rating Supply Voltage VIN Control Input VSW Switch Input Voltage TA 1.65 V to 4.5 V Voltage(1) 0 V to VCC 0 V to VCC Operating Temperature -40 °C to +85 °C Note: 1. Unused inputs must be held HIGH or LOW. They may not float. DC Electrical Characteristics Unless otherwise indicated, specifications indicate a temperature range of -40 °C to +85 °C. All typical values are at 25 °C unless otherwise specified. Symbol Parameter VCL Clamp Voltage VIH Input Voltage HIGH VIL Conditions VCC (V) IIN = -18 mA Min. Typ. 3.0 4.3 1.4 2.7 to 3.6 1.3 2.3 to 2.7 1.1 1.65 to 1.95 0.9 Input Voltage LOW Max. Units -1.2 V V 4.3 0.7 2.7 to 3.6 0.5 2.3 to 2.7 0.4 1.65 to 1.95 0.4 V IIN Control Input Leakage VIN = 0 V to VCC 1.65 to 4.5 -1.0 1.0 A IOZ Off State Leakage VIN = 0 V to VCC 1.65 to 4.5 -1.0 1.0 A IOFF Power OFF Leakage Current (I/O ports) VIN = 0 V to VCC 0 -1.0 1.0 A RON On Resistance ION = 8 mA, VIN = 0 V to 0.4 V 4.3 7 10 2.7 to 3.6 9 12 2.3 to 2.7 12 16 4.3 0.6 2.7 to 3.6 0.6 2.3 to 2.7 0.6 4.3 0.4 2.7 to 3.6 1.5 2.3 to 2.7 1.8 RON RFLAT (ON) On Resistance Matching On Resistance Flatness ION = 8 mA, VIN = 0 V to 0.4 V ION = 8mA, VIN = 0 V to 0.4 V ICC Quiescent Supply Current IOUT = 0 mA 4.3 ICCT Increase in ICC per Input Control Voltage VControl = 2.6 V 4.3 Rev. 1.1 July 2011 VControl = 1.8 V www.aosmd.com 1.0 A 3.0 7.0 A 7.0 15.0 Page 3 of 10 AOZ6186 AC Electrical Characteristics Unless otherwise indicated, specifications indicate a temperature range of -40 °C to +85 °C. All typical values are at 25 °C unless otherwise specified. Symbol tON tOFF Parameter Turn-On Time Turn-Off Time RL = 50 RL = 50 Conditions VCC (V) , CL = 5 pF Min. Typ. Max. Units 3.6 to 4.3 18 35 ns 2.7 to 3.6 21 45 2.3 to 2.7 36 65 1.65 to 1.95 80 120 3.6 to 4.3 11 30 2.7 to 3.6 11 40 , CL = 5 pF 2.3 to 2.7 14 55 1.65 to 1.95 59 100 ns tPD Propagation Delay RL = 50 , CL = 5 pF 1.65 to 4.5 0.25 ns tBBM Break-Before-Make RL = 50 , CL = 5 pF 1.65 to 4.5 6.2 ns OIRR Off Isolation RL = 50 , f = 240 MHz 1.65 to 4.5 -36 dB XTALK Crosstalk RL = 50 , f = 240 MHz 1.65 to 4.5 -40 dB -3 dB Bandwidth RL = 50 , CL = 0 pF 1.65 to 4.5 960 MHz BW USB Hi-Speed AC Electrical Characteristics Unless otherwise indicated, specifications indicate a temperature range of -40 °C to +85 °C. All typical values are at 25 °C unless otherwise specified. Symbol Parameter tSK Skew of Opposite Transitions of the Same Output RL = 50 Total Jitter RL = 50 , CL = 5 pF, tr = tf = 500 ps (10% to 90%), f = 480MHz, PRBS = 215 – 1 tJ Conditions , CL = 5 pF VCC (V) Min. Typ. Max. Units 1.65 to 4.5 20 ps 1.65 to 4.5 200 ps Capacitance Unless otherwise indicated, specifications indicate a temperature range of -40 °C to +85 °C. All typical values are at 25 °C unless otherwise specified. Symbol Parameter Conditions CIN Control Pin Input Capacitance 1 MHz CON D+/D- On Capacitance OE = 0V, f = 1 MHz VCC (V) 1.7 3.3 4.7 OE = VCC, f = 1 MHz OE = 0V, f = 10 MHz Rev. 1.1 July 2011 www.aosmd.com Max. Units pF 1.7 OE = 0V, f = 10 MHz HSD1n/HSD2n Off Capacitance Typ. 3.3 10 MHz COFF Min. 5.0 3.3 1.8 2.0 Page 4 of 10 AOZ6186 Eye Patterns 1FTW97&7MKREP;MXLSYX%3>58                       8MQIRW 1FTW97&7MKREP;MXL%3>58                       8MQIRW Rev. 1.1 July 2011 www.aosmd.com Page 5 of 10 AOZ6186 Typical Performance Characteristics 6(7SR ZW%REPSK:SPXEKI 6(7SR ZW%REPSK:SPXEKI :GG!: EX '     :GG!: :GG!: :GG!: :GG!: :GG!:          '  '  '        :EREPSK:       -RWIVXMSR0SWWZW*VIUYIRG]      :EREPSK: