AOZ8211DI-05

AOZ8211 0ne-line TVS Diode General Description Features The AOZ8211 is a one-line transient voltage suppressor diode designed to protect voltage sensitive electronics from high transient conditions and ESD.  ESD protection for high-speed data lines: AOZ8211DI-02 – Exceeds: IEC 61000-4-2 (ESD) ±30 kV (air), ±30 kV (contact) – Human Body Model (HBM) ±30 kV This device incorporates one TVS diode in an ultra-small DFN 1.0 mm x 0.6 mm package. During transient conditions, the one-line TVS diode directs the transient to ground. It may be used to meet the ESD immunity requirements of IEC 61000-4-2, Level 4 (±15 kV air, ±8 kV contact discharge). AOZ8211DI-03 – Exceeds: IEC 61000-4-2 (ESD) ±30 kV (air), ±30 kV (contact) – Human Body Model (HBM) ±30 kV The AOZ8211 comes in an RoHS compliant package and is rated over a -40 °C to +85 °C ambient temperature range. AOZ8211DI-05 – Exceeds: IEC 61000-4-2 (ESD) ±28 kV (air), ±28 kV (contact) – Human Body Model (HBM) ±30 kV The ultra-small 1.0 mm x 0.6 mm x 0.5 mm DFN package makes the AOZ8211 ideal for applications where PCB space is at a premium. The small size and high ESD protection makes the AOZ8211 ideal for protecting voltage sensitive electronics from high transient conditions and ESD. AOZ8211DI-12 – Exceeds: IEC 61000-4-2 (ESD) ±28 kV (air), ±28 kV (contact) – Human Body Model (HBM) ±30 kV AOZ8211DI-24 – Exceeds: IEC 61000-4-2 (ESD) ±15 kV (air), ±18 kV (contact) – Human Body Model (HBM) ±30 kV  Small package saves board space  Low insertion loss  Low clamping voltage  Low operating voltage: 2.5 V, 3.3 V, 5 V, 12 V and 24 V Applications  Portable handheld devices  Keypads, data lines, buttons  Notebook computers  Digital cameras  Portable GPS  MP3 players Typical Application Pin Configuration Signal Line Cathode 2 1 Anode Unidirection Protection of Single Line Rev. 3.0 October 2015 www.aosmd.com Page 1 of 7 AOZ8211 Ordering Information Part Number Ambient Temperature Range Package Environmental -40 °C to +85 °C DFN 1.0 x 0.6 Green Product RoHS Compliant AOZ8211DI-02 AOZ8211DI-03 AOZ8211DI-05 AOZ8211DI-12 AOZ8211DI-24 AOS Green Products use reduced levels of Halogens, and are also RoHS compliant. Please visit www.aosmd.com/media/AOSGreenPolicy.pdf for additional information. Absolute Maximum Ratings Exceeding the Absolute Maximum Ratings may damage the device. Parameter AOZ8211DI-02 AOZ8211DI-03 AOZ8211DI-05 AOZ8211DI-12 AOZ8211DI-24 Peak Pulse Current, tP = 8/20 µs 6A 6A 5.5 A 5A 2.5 A Peak Pulse Power, tP = 8/20 µs 50 W 55 W 50 W 100 W 110 W -65 °C to +150 °C -65 °C to +150 °C -65 °C to +150 °C -65 °C to +150 °C -65 °C to +150 °C ESD Rating per IEC61000-4-2, Contact(1) ±30 kV ±30 kV ±28 kV ±28 kV ±18 kV ESD Rating per IEC61000-4-2, Air(1) ±30 kV ±30 kV ±28 kV ±28 kV ±15 kV ESD Rating per Human Body Model(2) ±30 kV ±30 kV ±30 kV ±30 kV ±30 kV Storage Temperature (TS) Notes: 1. IEC 61000-4-2 discharge with CDischarge = 150pF, RDischarge = 330 Ω. 2. Human Body Discharge per MIL-STD-883, Method 3015 CDischarge = 100 pF, RDischarge = 1.5 kΩ. Maximum Operating Ratings Parameter Rating Junction Temperature (TJ) Rev. 3.0 October 2015 -40 °C to +85 °C www.aosmd.com Page 2 of 7 AOZ8211 Electrical Characteristics TA = 25 °C unless otherwise specified. Symbol Parameter Diagram IPP Maximum Reverse Peak Pulse Current VCL Clamping Voltage @ IPP VRWM IR VBR IF Working Peak Reverse Voltage Maximum Reverse Leakage Current Breakdown Voltage @ IT IF Forward Current VF Forward Voltage PPK Peak Power Dissipation CJ I VCL VBR VRWM V IR VF IT IPP Capacitance @ VR = 0 and f = 1 MHz Electrical Characteristics TA = 25 °C unless otherwise noted, VF = 0.9 V Max. @ IF = 10 mA for all types. VCL Max. Device Device Marking VRWM (V) Max. IR (µA) Max. VBR (V) Min. IT VF (V) Typ. AOZ8211DI-02 Q 2.5 0.1 2.8 2 µA 0.75 5.00 7.00 9.50 11 AOZ8211DI-03 G 3.3 0.1 3.7 2 µA 0.75 5.50 7.50 9.50 11 IPP = 1 A IPP = 5 A IPP = 12 A CJ (pF) Typ. AOZ8211DI-05 J 5.0 0.1 6.0 1 mA 0.75 8.00 9.00 10.00 16 AOZ8211DI-12 K 12.0 0.1 14.0 1 mA 0.75 18.00 20.00 21.00 30 AOZ8211DI-24 M 24.0 0.1 27.0 1 mA 0.75 33.00 36.00 37.00 20 Rev. 3.0 October 2015 www.aosmd.com Page 3 of 7 AOZ8211 Typical Performance Characteristics Clamping Voltage vs. Peak Pulse Current Forward Voltage vs. Forward Current (tperiod = 100 ns, tr = 1 ns) 9 35 30 25 12V 20 15 5V 10 0 8 5V 7 6 2.5V 5 4 12V 3 24V 2 2.5V 5 (tperiod = 100 ns, tr = 1 ns) 10 24V Forward Voltage (V) Clamping Voltage, VCL (V) 40 1 0 2 4 6 8 10 0 12 0 2 4 Capacitance vs. Reverse Bias 10 12 I/O – Gnd Insertion Loss vs. Frequency 1.2 5 1.0 -5 0 0.8 2.5V 12V 5V 0.6 0.4 24V 0.2 Insertion Loss (dB) Normalized Capacitance 8 Forward Current (A) Peak Pulse Current, IPP (A) 0 6 2.5V 12V -10 24V -15 -20 5V -25 -30 -35 -40 0 1 2 3 4 5 -45 Reverse Bias (Volts) Rev. 3.0 October 2015 1 10 100 1000 10000 Frequency (MHz) www.aosmd.com Page 4 of 7 AOZ8211 C AB aaa C Package Dimensions, DFN 1.0 x 0.6, 2L Pin# ID ccc C R E A 2x b(2x) 2x Seating Plane 0.08 C A aaa C C L1 e/2 L(2x) e SIDE VIEW bbb 2x D B BOTTOM VIEW RECOMMENDED LAND PATTERN 1.00 0.30 0.55 0.40 0.30 0.10 x 45° UNIT: mm Dimensions in millimeters Symbols A A1 b D E e L L1 R aaa bbb ccc Min. Nom. Max. 0.47 0.50 0.53 0.00 0.03 0.05 0.45 0.50 0.55 0.95 1.00 1.05 0.55 0.60 0.65 --0.40 --0.20 0.25 0.30 0.05±0.03 Ref. 0.05 0.10 0.15 0.15 0.05 0.05 Dimensions in inches Symbols A A1 b D E e L L1 R aaa bbb ccc Min. Nom. Max. 0.019 0.020 0.021 0.000 0.001 0.002 0.018 0.020 0.022 0.037 0.039 0.041 0.022 0.024 0.026 --0.016 --0.008 0.010 0.012 0.002±0.001 Ref. 0.002 0.004 0.006 0.006 0.002 0.002 Notes: 1. All dimensions are in milliteters. Angles are in degrees. 2. Coplanarity applies to the exposed heat sink slug as well as the terminals. Rev. 3.0 October 2015 www.aosmd.com Page 5 of 7 AOZ8211 Tape and Reel Dimensions, DFN 1.0 x 0.6, 2L P1 P2 Carrier Tape T D1 E1 E2 E B0 K0 P0 D0 A0 UNIT: mm Option A Package A0 B0 K0 DFN 1.0x0.6/ 0.69 1.19 0.66 DFN 1.0x0.6A ±0.05 ±0.05 ±0.05 (8 mm) D0 0.40 ±0.05 D1 E E1 1.50 8.00 1.75 ±0.10 +0.3/-0.1 ±0.10 E2 3.50 ±0.05 P0 2.00 ±0.05 P1 4.00 ±0.10 P2 T 2.00 0.23 ±0.05 ±0.02 B 0.61 DFN 1.0x0.6/ 0.65 1.05 DFN 1.0x0.6A ±0.04 ±0.04 ±0.04 (8 mm) 0.40 ±0.05 1.50 8.00 1.75 ±0.10 +0.3/-0.1 ±0.10 3.50 ±0.05 2.00 ±0.10 4.00 ±0.10 2.00 0.20 ±0.05 ±0.05 Reel W1 S G N M V K R H W UNIT: mm Tape Size Reel Size 8mm ø178 M ø178 ±0.5 N ø55 ±1 W 8.4 +1.5/-0 W1 Max. 14.4 H ø13.0 ±0.5 K Max. 10.1 S 2.0 ±0.5 G N/A R N/A V N/A Leader / Trailer & Orientation TVS Unit Per Reel: 10000pcs Trailer Tape 300mm Min. Rev. 3.0 October 2015 Components Tape Orientation in Pocket www.aosmd.com Leader Tape 500mm Min. Page 6 of 7 AOZ8211 Part Marking AOZ8211DI-xxL (DFN 2L) Cathode Mark X X Product Number Code Q = AOZ8211DI-02L J = AOZ8211DI-05L K = AOZ8211DI-12L M = AOZ8211DI-24L Date Code LEGAL DISCLAIMER Applications or uses as critical components in life support devices or systems are not authorized. AOS does not assume any liability arising out of such applications or uses of its products. AOS reserves the right to make changes to product specifications without notice. It is the responsibility of the customer to evaluate suitability of the product for their intended application. Customer shall comply with applicable legal requirements, including all applicable export control rules, regulations and limitations. AOS' products are provided subject to AOS' terms and conditions of sale which are set forth at: http://www.aosmd.com/terms_and_conditions_of_sale LIFE SUPPORT POLICY ALPHA AND OMEGA SEMICONDUCTOR PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. Rev. 3.0 October 2015 2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. www.aosmd.com Page 7 of 7