AOZ8831DT-03

AOZ8831DT-03 Ultra Low Capacitance One-line Bi-directional TVS Diode General Description Features The AOZ8831DT-03 is an ultra low capacitance one-line bi-directional transient voltage suppressor diode designed to protect high speed data lines and voltage sensitive electronics from high transient conditions and ESD.  – Human Body Model (HBM) ±15kV  Small package saves board space  Ultra low capacitance: 0.22pF  Low clamping voltage  Operating voltage: 3.6V  Pb-free device Applications The ultra-small 1.0 x 0.6mm DFN package makes it ideal for applications where PCB space is a premium. The small size and high ESD protection makes it ideal for protecting voltage sensitive electronics from high transient conditions and ESD.  Portable handheld devices  Notebook computers  Digital Cameras  Portable GPS Typical Application Pin Configuration Signal Line Top View Bidirection Protection of Single Line Rev. 4.0 April 2021 www.aosmd.com 2 Pin 1 Pin 2 1 Pin 2 The AOZ8831DT-03 comes in an RoHS compliant DFN package and is rated over a -40°C to +85°C ambient temperature range. – Exceeds: IEC 61000-4-2 (ESD) ±20kV (air), ±20kV (contact) Pin 1 This device incorporates one TVS diode in an ultra-small DFN 1.0 x 0.6 package. It may be used to meet the ESD immunity requirements of IEC 61000-4-2, Level 4. ESD protection for high-speed data lines: Bottom View Page 1 of 5 AOZ8831DT-03 Ordering Information Part Number Ambient Temperature Range Package Environmental AOZ8831DT-03 -40°C to +85°C DFN 1.0 x 0.6 Green Product AOS Green Products use reduced levels of Halogens, and are also RoHS compliant. Please visit www.aosmd.com/media/AOSGreenPolicy.pdf for additional information Absolute Maximum Ratings Exceeding the Absolute Maximum ratings may damage the device. Parameter Rating VP – VN 3.6V Peak Pulse Current (IPP), tP = 8/20µs 6A Peak Pulse Power (IEC61000-4-5 8/20µs current pulse) 90W Storage Temperature (TS) -65°C to +150°C ESD Rating per IEC61000-4-2, ESD Rating per Contact(1) ±20kV IEC61000-4-2, Air(1) ESD Rating per Human Body ±20kV Model(2) ±15kV Notes: 1. IEC 61000-4-2 discharge with CDischarge = 150pF, RDischarge = 330Ω. 2. Human Body Discharge per MIL-STD-883, Method 3015 CDischarge = 100pF, RDischarge = 1.5kΩ. Maximum Operating Ratings Parameter Rating Junction Temperature (TJ) Rev. 4.0 April 2021 -40°C to +125°C www.aosmd.com Page 2 of 5 AOZ8831DT-03 Electrical Characteristics TA = 25°C unless otherwise specified. Symbol Parameter Diagram IPP Maximum Reverse Peak Pulse Current(3) (IEC61000-4-5 8/20µs pulse) VCL Clamping Voltage @ IPP(3) VRWM IR VBR CJ I IPP Working Peak Reverse Voltage Maximum Reverse Leakage Current VCL VBR VRWM IR IT Breakdown Voltage VRWM VBR VCL V Capacitance @ VR = 0 and f = 1MHz IPP Device AOZ8831DT-03 Device VRWM (V) Marking Max. 4 3.6 VBR (V) Min. Max. IR (µA) Max. 4.5 10 0.1 VCL Max. IPP = 1 A IPP = 4 A 4 9.5 CJ (pF) IPP = 6 A Typ. Max. 15 0.22 0.35 Notes: 3. These specifications are guaranteed by design and characterization. Rev. 4.0 April 2021 www.aosmd.com Page 3 of 5 AOZ8831DT-03 Performance Characteristics Clamping Voltage vs. Peak Pulse Current Typical Variations of CIN vs. VR (IEC 61000-4-5 8/20µs current pulse) 16 0.9 14 0.8 Normalized Capacitance Clamping Voltage, VCL (V) (f = 1MHz, T = 25ºC) 1.0 12 10 8 6 4 2 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 1 Rev. 4.0 April 2021 2 3 4 Peak Pulse Current, IPP (A) 5 6 www.aosmd.com 0 0 0.5 1.0 1.5 2.0 Input Voltage (V) 2.5 3.0 3.5 Page 4 of 5 AOZ8831DT-03 LEGAL DISCLAIMER Applications or uses as critical components in life support devices or systems are not authorized. AOS does not assume any liability arising out of such applications or uses of its products. AOS reserves the right to make changes to product specifications without notice. It is the responsibility of the customer to evaluate suitability of the product for their intended application. Customer shall comply with applicable legal requirements, including all applicable export control rules, regulations and limitations. AOS' products are provided subject to AOS' terms and conditions of sale which are set forth at: http://www.aosmd.com/terms_and_conditions_of_sale LIFE SUPPORT POLICY ALPHA AND OMEGA SEMICONDUCTOR PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. Rev. 4.0 April 2021 2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. www.aosmd.com Page 5 of 5