EK50

EK50 Evaluation Kit APPLICABLE PARTS (SOLD SEPARATELY) • • PB50 PB58 INTRODUCTION This easy-to-use kit provides a platform for the evaluation of the PB50 and PB58 high voltage power boosters. The PB50 and PB58 are designed most commonly in combination with a small signal, general purpose op amp. However, they can also be used without a driver amplifier. This kit can be used to analyze a multitude of standard or proprietary circuit configurations. Figure 1: PCB Layout 6" GND GND GND GND GND GND +Vcc 1 OP AMP +IN –Vcc GND –IN GND IN COM GND GND GND GND +Vs –Vs PB50 PB58 GND 8" RG CC GND RCL PIN1 GND GND GND GND OUT GND GND GND GND GND EVAL01 REV–B GND www.apexanalog.com EK 50 © Apex Microtechnology Inc. All rights reserved Jan 2016 EK50U Rev G EK50 Figure 2: Equivalent Schematic CAUTION 1.Use thermal grease or Apex Microtechnology Thermal Washer TW03 between power booster and heatsink. 2.Use 18 gauge teflon sleeve on at least two opposite pins 3.Mounting torque greater than 7 in•lbs on power booster mounting bolts will void warranty! PARTS LIST Reference 2 Manufacturer Part # Description QTY HS13 Heatsink 1 EVAL01 PC Board 1 MS03 Mating Socket 1 HWRE02 Hardware Kit 1 HWRE05 8-Pin Wire Wrap Socket 1 TW03 Thermal Washer 1 Box (10) EK50U Rev G EK50 HWRE02 contains the following: • 4 #8 x 0.375" Panhead Screws • 4 #8 x 0.375" Hex Spacers • 4 #8 x 2.00" Hex Stand Offs • 2 #6 x 1.25" Panhead Screws • 2 #6 x 5/16” Hex Nuts Figure 3: Assembly #8 x .375" Panhead Screw 4 places typ #8 x .375" Hex Spacer 4 places typ #8 x 2.00" Hex Standoff 4 places typ 8-pin wire wrap socket Teflon Tubing (2 Opposite Pins Minimum) Eval01 PC Board MS03 Mating Socket Recessed Nuts #6 x 5/16" 2 PlacesTyp PB50/PB58 Package #6 x 1.25" Panhead Screws 2 Places Typ HS13 Heatsink NEED TECHNICAL HELP? CONTACT APEX SUPPORT! For all Apex Microtechnology product questions and inquiries, call toll free 800-546-2739 in North America. For inquiries via email, please contact apex.support@apexanalog.com. International customers can also request support by contacting their local Apex Microtechnology Sales Representative. To find the one nearest to you, go to www.apexanalog.com IMPORTANT NOTICE Apex Microtechnology, Inc. has made every effort to insure the accuracy of the content contained in this document. However, the information is subject to change without notice and is provided "AS IS" without warranty of any kind (expressed or implied). Apex Microtechnology reserves the right to make changes without further notice to any specifications or products mentioned herein to improve reliability. This document is the property of Apex Microtechnology and by furnishing this information, Apex Microtechnology grants no license, expressed or implied under any patents, mask work rights, copyrights, trademarks, trade secrets or other intellectual property rights. Apex Microtechnology owns the copyrights associated with the information contained herein and gives consent for copies to be made of the information only for use within your organization with respect to Apex Microtechnology integrated circuits or other products of Apex Microtechnology. This consent does not extend to other copying such as copying for general distribution, advertising or promotional purposes, or for creating any work for resale. APEX MICROTECHNOLOGY PRODUCTS ARE NOT DESIGNED, AUTHORIZED OR WARRANTED TO BE SUITABLE FOR USE IN PRODUCTS USED FOR LIFE SUPPORT, AUTOMOTIVE SAFETY, SECURITY DEVICES, OR OTHER CRITICAL APPLICATIONS. PRODUCTS IN SUCH APPLICATIONS ARE UNDERSTOOD TO BE FULLY AT THE CUSTOMER OR THE CUSTOMER’S RISK. Apex Microtechnology, Apex and Apex Precision Power are trademarks of Apex Microtechnology, Inc. All other corporate names noted herein may be trademarks of their respective holders. EK50U Rev G 3