���������������������������
�������������
���������������
��������������������������������������������������������������
FEATURES
• • • • • • • • • • HIGH INTERNAL DISSIPATION — 125 Watts HIGH VOLTAGE, HIGH CURRENT — 100V, 10A HIGH SLEW RATE — 10V/µs 4 WIRE CURRENT LIMIT SENSING OPTIONAL BOOST VOLTAGE INPUTS LINEAR AND ROTARY MOTOR DRIVES YOKE/MAGNETIC FIELD EXCITATION PROGRAMMABLE POWER SUPPLIES TO ±45V INDUSTRIAL AUDIO PACKAGE OPTION - DIP10 - DUAL-IN-LINE
APPLICATIONS
30-pin DIP PACKAGE STYLE CL TYPICAL APPLICATION REF: APPLICATION NOTE 25
The high power bandwidth and high voltage output of the MP39 allows driving ultra-sonic transducers via a resonant circuit including the transducer and a matching transformer. The load circuit appears resistive to the MP39.
�� ���� � ������ ����� ����� �� ��� �� ���
DESCRIPTION
The MP39 is a cost-effective high voltage MOSFET power operational amplifier constructed with surface mount components on a thermally conductive but electrically isolated substrate. While the cost is low the MP39 offers many of the same features and performance specifications found in much more expensive hybrid power amplifiers. The metal substrate allows the MP39 to dissipate power up to 125 watts and its power supply voltages can range up to +/- 50 Volts (100V total). Optional boost voltage inputs allow the small signal portion of the amplifier to operate at higher supply voltages than the high current output stage. The amplifier is then biased to achieve close linear swings to the supply rails at high current for extra efficient operation. External compensation tailors performance to the user needs. A four-wire sense technique allows current limiting without the need to consider internal or external mili-ohm parasitic resistance in the output line. An Iq pin is available which can be used to shut off the quiescent current in the output stage. The output stage then operates class C and lowers quiescent power dissipation. This is useful in applications where output crossover distortion is not important.
����� ���
�� �� ����� ��� ����� ��� ��� � �� � �� �� �� �� ����� ����
����
��� �� ��� ��� �����
���
��
���������������������
����� �����������
EXTERNAL CONNECTIONS
�
��� ��� ��
�� ��
�
���
���
���
���
��
EQUIVALENT SCHEMATIC
��� � �� ���
� ��
��� ��� ���
�
�
�
�
�
�
�
�
�
��
�� ��� �� ��
�� ���
�� ��
��
�� ��
�������������������
�� �� �� �� �� �� �� �� �� �� �� �� �� �� �� ��
���
���
���
�����
���
��� � �� ��� �� �� ���� ��� �� �� �� ���� �� ��
��
�� ��
����� ����� ��� ��� ���
��
��� �
���
��
�� �� ��
�
�
��� �� �� �� ��� �� �� ��� ��
��� ��� ��� ��� ��� ��� ���
�� �� ��
��� ��� ���
* SEE "BYPASSING" PARAGRAPH Phase Compensation Gain Cc Rc 1 470pF 100Ω ≥3 220pF Short ≥ 10 100pF Short
APEX MICROTECHNOLOGY CORPORATION • TELEPHONE (520) 690-8600 • FAX (520) 888-3329 • ORDERS (520) 690-8601 • EMAIL prodlit@apexmicrotech.com
���
�����
��
��
���
��
���
���
���
��
��
��
�� �� �� ��
���
��
��
��
��
1
ABSOLUTE MAXIMUM RATINGS SPECIFICATIONS
MP39 • MP39A
SUPPLY VOLTAGE, +VS to –VS BOOST VOLTAGE OUTPUT CURRENT, within SOA POWER DISSIPATION, internal INPUT VOLTAGE, differential INPUT VOLTAGE, common mode TEMPERATURE, pin solder - 10s TEMPERATURE, junction2 TEMPERATURE, storage OPERATING TEMPERATURE RANGE, case MP39 TYP 5 30 15 30 10 .01 10 1010 20 ±VB 12 98 10 113 2 40 60 ±VS 8.8 ±VS 6.0 ±VS 6.8 ±VS 1.1 2.5 10 10 4 ± ± ± ± * * * * 10 ±50 22 26 .9 1.2 85 * * ± 100V ±VS ±20V 25A 125W ±20V ±VB 200°C 175°C –40 to +105°C –40 to +85°C MP39A TYP * * * * * * * * * * * * * * * * * * * *
ABSOLUTE MAXIMUM RATINGS
SPECIFICATIONS
PARAMETER INPUT OFFSET VOLTAGE, initial OFFSET VOLTAGE, vs. temperature OFFSET VOLTAGE, vs. supply OFFSET VOLTAGE, vs. power BIAS CURRENT, initial BIAS CURRENT, vs. supply OFFSET CURRENT, initial INPUT IMPEDANCE, DC INPUT CAPACITANCE COMMON MODE VOLTAGE RANGE COMMON MODE REJECTION, DC INPUT NOISE GAIN OPEN LOOP, @15Hz GAIN BANDWIDTH PRODUCT POWER BANDWIDTH PHASE MARGIN OUTPUT VOLTAGE SWING VOLTAGE SWING SETTLING TIME to .1% SLEW RATE CAPACITIVE LOAD RESISTANCE CURRENT, CONTINUOUS POWER SUPPLY VOLTAGE CURRENT, quiescent, boost supply CURRENT, quiescent, total THERMAL RESISTANCE, AC, junction to case3 RESISTANCE, DC, junction to case RESISTANCE4, junction to air TEMPERATURE RANGE, case TEST CONDITIONS 1 MIN MAX 10 50 200 50 * * MIN MAX 3 * 100 30 UNITS mV µV/°C µV/V µV/W pA pA/V pA Ω pF V dB µVrms db MHz kHz ° V V µs V/µs nF Ω A V mA mA °C/W °C/W °C/W °C
Full temperature range Full temperature range
Full temperature range, CC = 100pF IO=10A RL=10Ω, VO = 90V p-p CC = 100pF Full temperature range IO=10A ±VB = ±VS ±10V, IO=10A AV=+1,10V step, RL =4Ω AV= –10, CC= 100pF Full temperature range, AV=+1
94
Full temperature range
±15
Full temperature range, F>60Hz Full temperature range, F
很抱歉,暂时无法提供与“MP39A”相匹配的价格&库存,您可以联系我们找货
免费人工找货