SPD127-334M

Current Rating at 25°C Ambient The maximum DC current that will cause a 40°C maximum temperature rise and where the inductance will not decrease by more than 10% from its zero DC value Marking For values lower than 10 μH the R indicates a decimal point and the remaining digits indicate the inductance in μH. For values 10 μH and above, the first two digits indicate the inductance in μH and the third digit indicates the number of trailing zeros where a zero indicates that there are no trailing zeros. Example: SPD125R-222M (2.2 μH) 2R2 Example: SPD127R-105M (1,000 μH) 102 Packaging Tape & reel (24mm): 13" reel, 500 pieces max.; 7" reel not available -222M -332M -472M -682M -103M -123M -153M -183M -223M -273M -333M -393M -473M -563M -683M -823M -104M -124M -154M -184M -224M -274M -334M -394M -474M -564M -684M -824M -105M SERIES SPD125R FERRITE CORE & SLEEVE 2.2 100 0.020 3.3 100 0.030 4.7 100 0.040 6.8 100 0.050 10 100 0.055 12 1.0 0.060 15 1.0 0.065 18 1.0 0.070 22 1.0 0.075 27 1.0 0.085 33 1.0 0.095 39 1.0 0.105 47 1.0 0.115 56 1.0 0.135 68 1.0 0.170 82 1.0 0.190 100 1.0 0.210 120 1.0 0.250 150 1.0 0.300 180 1.0 0.350 0.420 220 1.0 0.510 270 1.0 0.600 330 1.0 0.750 390 1.0 0.820 470 1.0 1.000 560 1.0 1.300 680 1.0 1.650 820 1.0 2.000 1000 1.0 7.00 5.50 5.00 4.50 4.00 3.50 3.30 3.00 2.80 2.30 2.10 2.00 1.80 1.60 1.50 1.40 1.30 1.10 1.00 0.90 0.80 0.75 0.70 0.65 0.60 0.55 0.50 0.45 0.40 -222M -332M -472M -682M -103M -123M -153M -183M -223M -273M -333M -393M -473M -563M -683M -823M -104M -124M -154M -184M -224M -274M -334M -394M -474M -564M -684M -824M -105M SERIES SPD127R FERRITE CORE & SLEEVE 0.015 2.2 100 0.018 3.3 100 0.022 4.7 100 0.030 6.8 100 0.040 10 100 0.045 12 1.0 0.048 15 1.0 0.052 18 1.0 0.055 22 1.0 0.060 27 1.0 0.065 33 1.0 0.080 39 1.0 0.100 47 1.0 0.120 56 1.0 0.140 68 1.0 0.170 82 1.0 0.220 100 1.0 0.250 120 1.0 0.320 150 1.0 0.360 180 1.0 0.390 220 1.0 0.520 270 1.0 0.620 330 1.0 0.750 390 1.0 0.980 470 1.0 1.150 560 1.0 1.220 680 1.0 1.400 820 1.0 1.540 1000 1.0 8.50 7.50 6.80 6.20 5.40 4.90 4.50 3.90 3.60 3.40 3.00 2.80 2.50 2.30 2.10 1.90 1.70 1.60 1.40 1.30 1.20 1.10 1.00 0.90 0.80 0.75 0.70 0.65 0.62 s or ct du In Application Frequency Range Values 2.2µH to 10µH to 1.0 MHz Min. Values above 10µH to 300 kHz Min. er w Po Operating temperature range –55°C to +125°C NG TI ) RA S T MP EN (A RR AL CU PIC TY CE AN ) ST S SI HM RE M (O DC MU XI MA Mechanical Configuration Units designed for surface mounting; ferrite core and ferrite sleeve ) Hz (k Millimeters 12.0 ± 0.8 12.0 ± 0.8 6.0 Max. (Series SPD125) 8.0 Max. (Series SPD127) 7.6 ± 0.5 5.0 ± 0.5 2.18 ± 0.5 0.38 Ref. only 1.91 Ref. only 5.03 Ref. only Y NC UE EQ FR Physical Parameters Inches A 0.472 ± 0.032 B 0.472 ± 0.032 C 0.236 Max. 0.315 Max. D 0.300 ± 0.020 E 0.198 ± 0.020 F 0.086 ± 0.020 G 0.015 Ref. only H 0.075 Ref. only I 0.198 Ref. only ST TE Bottom 0% ±2 H) (µ Top R* Actual Size E MB NU Shielded Surface Mount Inductors CE AN CT DU IN SPD125R SPD127R SH DA SERIES *Complete part # must include series # PLUS the dash # Note: No vias and traces in restricted area. 270 Quaker Rd., East Aurora NY 14052 • Phone 716-652-3600 • Fax 716-652-4814 • E-mail: apisales@delevan.com • www.delevan.com 8/2021