08-354000-11-RC

Series 350000 SOIC and SOJ-to-DIP Adapter FEATURES • A cost-effective means of upgrading to SOJ or SOIC without changing your PCB layout • Available on 0.300 [7.62] centers. Consult Data Sheet 18011 for adaptors on 0.400 [10.16] or 0.600 [15.24] centers GENERAL SPECIFICATIONS • BOARD MATERIAL: 0.062 [1.58] thick FR-4 with 1-oz. Cu traces, both sides • PINS: Brass 360 1/2-hard per UNS C36000 ASTM-B16-00 • PIN PLATING: 200μ [5.08μ] min. Sn per ASTM B 545 Type-1 or Sn/Pb 93/7 per ASTM B 545 over 100μ [2.54μ] Ni per SAE-AMS-QQ-N-290 • OPERATING TEMPERATURE: 221°F [105°C] MOUNTING CONSIDERATIONS • SUGGESTED PCB HOLE SIZE: 0.028 ±0.003 [0.71 ±0.08] dia. CUSTOMIZATION: In addition to the standard products shown on this page, Aries specializes in custom design and production. Special materials, platings, sizes, and configurations can be furnished, depending on the quantity. NOTE: Aries reserves the right to change product general specifications without notice. ALL DIMENSIONS: INCHES [MILLIMETERS] ALL TOLERANCES: ±0.005 [0.13] UNLESS OTHERWISE SPECIFIED “A” = NO. OF PINS PER ROW x 0.100 [2.54] “D” = (NO. OF PINS PER ROW -1) x 0.100 [2.54] CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS ORDERING INFORMATION XX-350000-1X-P Pins ( see Table) Series Optional Panelized Form Pin Plating 0 = Sn/Pb 1 = Au/Ni P/N 08-350000-1X 14-350000-1X 16-350000-1X 18-350000-1X 20-350000-1X 24-350000-1X 20-350001-1X 28-350002-1X Pins 8 14 16 18 20 24 20 28 Type SOIC SOIC SOIC SOIC SOIC SOIC SOJ SOIC Dim. “B” 0.460 [11.68] 0.450 [11.43] 0.450 [11.43] 0.450 [11.43] 0.450 [11.43] 0.450 [11.43] 0.420 [10.67] 0.400 [10.16] Centers “C” 0.300 [7.62] 0.300 [7.62] 0.300 [7.62] 0.300 [7.62] 0.300 [7.62] 0.300 [7.62] 0.300 [7.62] 0.300 [7.62] Dim. “E” 0.455 [11.56] 0.420 [10.67] 0.420 [10.67] 0.420 [10.67] 0.420 [10.67] 0.420 [10.67] 0.350 [8.89] 0.350 [8.89] Dim. “F” 0.155 [3.94] 0.138 [3.51] 0.138 [3.51] 0.138 [3.51] 0.138 [3.51] 0.138 [3.51] 0.090 [2.29] 0.090 [2.29] Dim. “G” 0.150 [3.81] 0.300 [7.62] 0.350 [8.89] 0.400 [10.16] 0.450 [11.43] 0.550 [13.97] 0.600 [15.24] 0.650 [16.51] Dim. “H” 0.121 [3.07] 0.180 [4.57] 0.180 [4.57] 0.180 [4.57] 0.180 [4.57] 0.180 [4.57] 0.060 [1.52] 0.375 [9.53] Bristol, PA 19007-6810 USA TEL (215) 781-9956 • FAX (215) 781-9845 WWW.ARIESELEC.COM • INFO@ARIESELEC.COM PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED 18010 Rev. AB