08-675-190T

Series 675 DIP Program Headers FEATURES • Aries DIP programmable headers offer unusual versatility for programming within the header itself • They can be individually programmed using cutters or Aries programming tool, P/N T-675, available separately, to remove the interconnecting sections. Consult Data Sheet 22002 for Aries programming tool • Adjacent and/or opposing pins are interconnected until the pre-slotted section is programmed out. An almost infinite number of programs can be attained by merely leaving or removing interconnecting sections • A low profile, snap-on cover protects header from dirt or accidental damage, and can be marked to identify the program within the header CUSTOMIZATION: In addition to the standard products shown GENERAL SPECIFICATIONS on this page, Aries specializes in custom design and production. • STANDARD HEADER BODY AND COVER : black UL 94V-0 4/6 Nylon Special materials, platings, sizes, and configurations can be furnished, depending on the quantity. NOTE: Aries reserves the • PINS: Brass 3/4-hard right to change product general specifications without notice. • PIN PLATING : “-T” 200µ [5.08µ] min. matte Sn per ASTM B545-97 2004e1 over 50µ [1.27µ] min. Ni per QQ-N-290; “-G” 10µ [0.25µ] Au per MILG-45204 over 50µ [1.27µ] min. Ni per QQ-N-290; “-TL” 200µ [5.08µ] ORDERING INFORMATION 90/10 Sn/Pb per MIL-T-10727 Type I over 50µ [1.27µ] min. Ni per QQ-NXX-675-19X X 290 Plating Pins • CURRENT RATING : 2 amps None = Au 8, 14 & 16 only* • OPERATING TEMPERATURE : 221°F [105°C] Sn or Sn/Pb plating; 257°F T = Sn Series [125°C] Au plating TL = Sn/Pb Style MOUNTING CONSIDERATIONS 190 or 191 (see dwg) * Consult factory for other sizes • SUGGESTED PCB HOLE SIZE: 0.035 ±0.002 [0.89 ±0.05] dia. ALL DIMENSIONS: INCHES [MILLIMETERS] ALL TOLERANCES: ±0.005 [0.13] UNLESS OTHERWISE SPECIFIED “A” = (NO. OF PINS PER ROW x 0.100 [2.54]) + 0.050 [1.27] “B” = (NO. OF PINS PER ROW -1) x 0.100 [2.54] COVERS AVAILABLE FOR 8-, 14- AND 16-PIN HEADERS. TO ORDER, SPECIFY P/N XX-650-10, WHERE “XX” DENOTES THE NUMBER OF PINS. CONSULT DATA SHEET 12033 FOR ADDITIONAL INFORMATION. CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS Bristol, PA 19007-6810 USA TEL (215) 781-9956 • FAX (215) 781-9845 WWW.ARIESELEC.COM • INFO@ARIESELEC.COM PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED 16004 Rev. AA