16-354W00-20

P/N 1111903 24-Pin SOWIC-to-22-Pin 0.400" CRT DIP Adapter for 75ALS162 and Others FEATURES • Convenient, cost-effective means of converting DIP-style packaging to SOWIC PC board layouts. GENERAL SPECIFICATIONS • SOCKET BODY: black, UL 94V-0 glass-filled 4/6 Nylon 170°C continuous use temp. • PCB: FR-4, 0.062 [1.58] thick • MALE ADAPTER PIN: Brass 360 1/2-hard per UNS C36000, ASTM-B16-85 • MALE ADAPTER PIN PLATING: 200µ [5.08µ] Sn/Pb 90/10 MIL-P-81728 over 100µ [2.54µ] Ni per QQ-N-290 • COLLET CONTACT PIN BODY: Brass 360 1/2-hard per UNS C36000, ASTM CUSTOMIZATION: In addition to the standard products shown B16/B16M on this page, Aries specializes in custom design and production. • COLLET PIN PLATING: 10µ [0.25µ] Au per MIL-G-45204 over 100µ [2.54µ] Ni Special materials, platings, sizes, and configurations can be furnished, depending on the quantity. NOTE: Aries reserves the per QQ-N-290 right to change product general specifications without notice. • 4-FINGER COLLET CONTACT: BeCu per UNS C17200, ASTM B194-08 • CONTACT PLATING: 10µ [0.25µ] min. Au per MIL-G-45204 over 50µ [1.27µ] Ni per QQ-N-290 ORDERING INFORMATION • CONTACT CURRENT RATING: 3 amps XX-354W00-X 0 • OPERATING TEMPERATURE: 221°F [105°C] Sn-plating • INSERTION FORCE: 180g/pin, based on a 0.018 [0.46] dia. test lead No. of Pins Adapter Pin Option 14, 16, 20, 24 • WITHDRAWAL FORCE: 90g/pin, based on a 0.018 [0.46] dia. test (see Suffix Table) Series lead 1 = Short Adapter Pin • NORMAL FORCE: 140g/pin, based on a 0.018 [0.46] dia. test lead 2 = Long Adapter Pin • SOCKET ACCEPTS LEADS: 0.015-0.025 [0.38-0.64] in dia., 0.1000.125 [2.54-3.18] long MOUNTING CONSIDERATIONS • SUGGESTED PCB HOLE SIZE: 0.028 ±0.002 [0.71 ±0.05] dia. ALL DIMENSIONS: INCHES [MILLIMETERS] ALL TOLERANCES: ±0.005 [0.13] UNLESS OTHERWISE SPECIFIED CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS P/N Suffix -10 -20 # Pins 14 16 18 20 24 Bristol, PA 19007-6810 USA TEL (215) 781-9956 • FAX (215) 781-9845 WWW.ARIESELEC.COM • INFO@ARIESELEC.COM A 0.700 [17.78] 0.800 [20.32] 0.900 [22.86] 1.000 [25.40] 1.200 [30.48] B 0.600 [15.24] 0.700 [17.78] 0.800 [20.32] 0.900 [22.86] 1.100 [27.94] Dim. X 0.265 [6.73] 0.325 [8.26] C 0.300 [7.62] 0.350 [8.89] 0.400 [10.16] 0.450 [11.43] 0.550 [13.91] Dim. Y 0.050 [1.27] 0.110 [2.79] D 0.200 [5.08] 0.225 [5.72] 0.250 [6.35] 0.275 [6.99] 0.325 [8.26] PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED 18073 Rev. AA