24-651000-10

P/N 36-651000-10 36-Pin SSOP-to-0.6 DIP Adapter GENERAL SPECIFICATIONS • PCB: FR-4, 0.062 [1.56] or 0.094 [2.39] thick • PADS: bare Cu protected with Entek® by Enthone or Omikron® white Sn to eliminate co-planarity concerns and solder bridges • MALE PINS: Brass 360 1/2-hard per UNS C36000, ASTM B16/B16M • OPERATING TEMPERATURE: 221°F [105°C] • MALE PIN PLATING: 200µ [5.08µ] Sn/Pb 93/7 per ASTM B579-73 over 100µ [2.54µ] Ni per SAE-AMS-QQ-N-290 MOUNTING CONSIDERATIONS • Standard thru-hole CUSTOMIZATION: In addition to the standard products shown on this page, Aries specializes in custom design and production. Special materials, platings, sizes, and configurations can be furnished, depending on the quantity. NOTE: Aries reserves the right to change product general specifications without notice. ALL DIMENSIONS: INCHES [MILLIMETERS] ALL TOLERANCES: ±0.005 [0.13] UNLESS OTHERWISE SPECIFIED CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS ORDERING INFORMATION 24-651000-10 24-651000-10-P = Panelized Version Bristol, PA 19007-6810 USA TEL (215) 781-9956 • FAX (215) 781-9845 WWW.ARIESELEC.COM • INFO@ARIESELEC.COM PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED 18065 Rev. AA