32-650000-10

Series 450001 and 650000 SOIC and SOJ-to-DIP Adapter FEATURES • A cost-effective means of upgrading to SOJ or SOIC without changing your PCB layout. • Available on 0.400 [10.16] and 0.600 [15.24] centers. Consult Data Sheet 18010 for Adapters on 0.300 [7.62] centers. GENERAL SPECIFICATIONS • BOARD MATERIAL: 0.062 [1.58] thick FR-4 or IS410 per IPC 4101A/26 with 1-oz. Cu traces, both sides • PADS: finished with HASL • PINS: Brass 360 1/2-hard per UNS C36000, ASTM B16/B16M • PIN PLATING: Sn/Pb • OPERATING TEMPERATURE: 221°F [105°C] MOUNTING CONSIDERATIONS • SUGGESTED PCB HOLE SIZE: 0.028 ±0.002 [0.71 ±0.05] dia. CUSTOMIZATION: In addition to the standard products shown on this page, Aries specializes in custom design and production. Special materials, platings, sizes, and configurations can be furnished, depending on the quantity. NOTE: Aries reserves the right to change product general specifications without notice. ORDERING INFORMATION (See Table below) ALL DIMENSIONS: INCHES [MILLIMETERS] ALL TOLERANCES: ±0.005 [0.13] UNLESS OTHERWISE SPECIFIED “A” = NO. OF PINS PER ROW X 0.100 [2.54] “D” = (NO. OF PINS PER ROW - 1) X 0.100 [2.54] AVAILABLE IN PANELIZED FORM WITH OR WITHOUT CUSTOMERSUPPLIED DEVICES MOUNTED. CONSULT FACTORY. CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS P/N 28-450001-10 32-450001-10 32-650000-10 24-650000-10 28-650000-10 Pins 28 32 32 24 28 Type SOJ SOJ SOJ SOIC SOIC Dim. “B” 0.480 [12.19] 0.530 [13.46] 0.700 [17.78] 0.700 [17.78] 0.700 [17.78] Centers “C” 0.400 [10.16] 0.400 [10.16] 0.600 [15.24] 0.600 [15.24] 0.600 [15.24] Dim. “E” 0.460 [11.68] 0.500 [12.70] 0.650 [16.51] 0.455 [11.56] 0.450 [11.43] Dim. “F” 0.080 [2.03] 0.090 [2.29] 0.200 [5.08] 0.150 [3.81] 0.075 [1.91] Dim. “G” 0.650 [16.51] 0.750 [19.05] 0.750 [19.05] 0.550 [13.97] 0.650 [16.51] Dim. “H” 0.325 [8.26] 0.425 [10.80] 0.425 [10.80] 0.180 [4.57] 0.375 [9.53] Bristol, PA 19007-6810 USA TEL (215) 781-9956 • FAX (215) 781-9845 WWW.ARIESELEC.COM • INFO@ARIESELEC.COM PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED 18011 Rev. AB