34-6625-31

Series 625 DIP Header w/Screw Machine Contacts FEATURES • Available in either Screw Machine or Coined Contacts in a Variety of Styles GENERAL SPECIFICATIONS • BODY MATERIAL: Black UL 94V-0 Glass-filled 4/6 Nylon • FORK & POST CONTACTS: Brass 360 1/2-hard per UNS C36000 ASTM B16/B16M-05 • SOLDER CUP CONTACTS: Phosphor Bronze per 544 UNS C54400 ASTM B139-01 • CONTACT PLATING: 10µ [0.25µ] min. Au per MIL-G-45204 –OR– 200µ [5.08µ] min. 93/7 Sn/Pb per ASTM B545 or 200µ [5.08µ] min. Sn per ASTM B545 Type 1 over 100µ [2.54µ] min. Ni per SAE AMS-QQ-N-290B • CONTACT CURRENT RATING: 2 amps (3 amps for Pin Style 5) ORDERING INFORMATION • OPERATING TEMPERATURE: -67°F to 221°F [-55°C to 105°C] for Sn & Sn/Pb plating; XX-X 625-X XXX -67°F to 257°F [-55°C to 125°C] for Au plating • ACCEPTS LEADS: up to 0.035 [0.89] dia. Plating 0 = Sn 0TL = Sn/Pb 1 = Au MOUNTING CONSIDERATIONS • SUGGESTED PCB HOLE SIZE: 0.028 ±0.002 [0.71 ±0.05] dia. Centers “Y” 0.200 [5.08] Dim. “Z” 0.300 [7.62] Body Style 1 A 0.300 [7.62] 0.400 [10.16] CB 0.400 [10.16] 0.500 [12.70] C 0.600 [15.24] 0.700 [17.78] CB 0.800 [20.32] 0.900 [22.86] 0.900 [22.86] 1.000 [25.40] D B 2 Pin Style ( See Drawing) Available Sizes 2 thru 10 2 thru 20 22 thru 40 2 thru 22 2 thru 40 42 thru 48 14 and 16 2 thru 64 ALL DIMENSIONS: INCHES [MILLIMETERS] ALL TOLERANCES: ±0.005 [0.13] UNLESS OTHERWISE SPECIFIED CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS Series Row-to-Row Spacing, Dim. “Y” 2 = 0.200 [5.08] 3 = 0.300 [7.62] 4 = 0.400 [10.16] 6 = 0.600 [15.24] 8 = 0.800 [20.32] 9 = 0.900 [22.86] No. of Pins (See Table) CUSTOMIZATION: ARIES SPECIALIZES IN CUSTOM DESIGN AND PRODUCTION. SPECIAL MATERIALS, PLATINGS, SIZES, AND CONFIGURATIONS CAN BE FURNISHED, DEPENDING ON QUANTITY. ARIES RESERVES THE RIGHT TO CHANGE PRODUCT GENERAL SPECIFICATIONS WITHOUT NOTICE PRINTOUTS OF THIS DOCUMENT MAY BE OUT-OF-DATE AND SHOULD BE CONSIDERED UNCONTROLLED 2609 Bartram Road • Bristol, PA 19007-6810 USA TEL 215-781-9956 • FAX 215-781-9845 WWW.ARIESELEC.COM • INFO@ARIESELEC.COM 12035 Rev. 6.2 1 of 1