42-6575-18

Series X57X Quick-Release Universal Zero-Insertion-Force DIP Test Socket FEATURES • Universal Test Socket accepts devices on 0.300 to 0.600 [7.62 to 15.24] centers • All pin count sockets go into PCB with either 0.300 or 0.600 [7.62 to 15.24] centers • Swing quick-release handle down to open contacts and insert device. Release and handle automatically returns as contacts close onto device leads • Socket handle can be mounted on either the right or left side • Sockets can be soldered into PCBs or plugged into any socket GENERAL SPECIFICATIONS • STANDARD SOCKET BODY: (for -10, -10TL, -11, -16 sockets) black UL 94V-0 glass-filled Polyphenylene Sulfide (PPS) • HIGH-TEMPERATURE SOCKET BODY: (for -18 socket) natural color PolyCUSTOMIZATION: In addition to the standard products shown etheretherketone (PEEK) on this page, Aries specializes in custom design and production. • HANDLE: Stainless Steel Special materials, platings, sizes, and configurations can be furnished, depending on the quantity. NOTE: Aries reserves the • HANDLE KNOB : Brass 360, 1/2-hard (no knob on loop handle) right to change product general specifications without notice. • CONTACT MATERIAL: (for -10, -10TL, -11) BeCu 172 per QQ-C-553; (for -16) Spinodal; (for -18) BeNi 360, 1/2-hard • ALL BECU CONTACTS: 50μ [1.27μ] min. Ni under plate per QQ-N-290, over plated with either: -10 200μ [5.08μ] min. matte Sn per ASTM B545-97; or -10TL 200μ [5.08μ] min. 90/10 Sn/Pb per MIL-T-10727-11 10μ [0.25μ] min. Au per MIL-G-45204 • SPINODAL CONTACT PLATING : (for -16) 50μ [1.27μ] min. NiB ORDERING INFORMATION • HIGH-TEMPERATURE BeNi CONTACT PLATING : (for -18) 50μ [1.27μ] NiB XX-X57X-1 8 • CONTACT CURRENT RATING : 1 amp • INSULATION RESISTANCE: 1000 mΩ min. Plating Pins • DIELECTRIC WITHSTANDING VOLTAGE : 1000 0 = Sn over Ni 24, 28, 32, 36, VAC OTL = Sn/Pb over Ni 40, 42, 44, 48 • LIFE CYCLE: 25,000 to 50,000 cycles 1 = Ay over Ni Row-to-Row Spacing (btm) • OPERATING TEMPERATURE : min. -67°F 6 = NiB (Spinodal) 3 = 0.300 [7.62] [ -55°C]; max. 221°F [105°C] for 8 = Hi-temp Socket* 6 = 0.600 [15.24] (std) Sn plating, 302°F [150°C] for Au plating, 392°F Solder Pin Tail [200°C] for NiB plating, 45° Handle Options 482°F [250°C] for high-temperature socket 0 = Long Handle, right side • RETENTION FORCE ( closed): 55 grams/pin 1 = Long Handle, left side based on a 0.020 [0.51] dia. test lead 2 = Short Handle, right side • ACCEPTS LEADS: 0.015-0.035 [0.38-0.89] 3 = Short Handle, left side wide, 0.110-0.280 [2.79-7.11] long 4 = Loop Handle, right side 5 = Loop Handle, left side MOUNTING CONSIDERATIONS * NOTE: only Loop Handle available • See socket footprint below w /hi-temp. socket Handle Long w/Knob Short w/ Knob Loop (no Knob) Dim “H1” 0.568 [14.43] 0.317 [8.05] 0.270 [6.86] Dim. “H2” 0.300 [7.62] 0.400 [10.16] 0.193 [4.90] Dim “H3” 0.471 [11.96] 0.252 [6.40] 0.405 [10.29] Bristol, PA 19007-6810 USA TEL (215) 781-9956 • FAX (215) 781-9845 WWW.ARIESELEC.COM • INFO@ARIESELEC.COM PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED 10019 1 of 2 Rev. AA Series X57X Quick-Release Universal Zero-Insertion-Force DIP Test Socket ALL DIMENSIONS: INCHES [MILLIMETERS] ALL TOLERANCES: ±0.005 [0.13] UNLESS OTHERWISE SPECIFIED “A” = (NO. OF PINS PER ROW x 0.100 [2.54]) + 0.590 [14.99] “B” = (NO. OF PINS PER ROW -1) x 0.100 [2.54] “C” = (NO. OF PINS PER ROW x 0.100 [2.54] + 0.415 [10.54] SOCKET FITS ARIES TEST SOCKET RECEPTACLE XX-6556-XX OR SIMILAR COMPETITOR’S MODELS. CONSULT DATA SHEET 10003 CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS Bristol, PA 19007-6810 USA TEL (215) 781-9956 • FAX (215) 781-9845 WWW.ARIESELEC.COM • INFO@ARIESELEC.COM PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED 10019 2 of 2 Rev. AA