44-647-10

Series 647 Universal SOIC-to-DIP 0.600 [15.24] Adapter FEATURES • 44-pin adapter for mounting Aries Series 547 Universal SOIC ZIF Test Socket to 0.600 [15.24] DIP PCB layout. • Consult Data Sheet 10015 for test socket information. GENERAL SPECIFICATIONS • BODY MATERIAL: black 0.062 [1.58] thick FR-4 or IS410 per IPC A4101A/26, 0.094 [2.39] thick, with 1-oz. min. Cu traces • FEMALE PIN BODY: Brass 360 1/2-hard per UNS C36000 ASTM-B16-00 • FEMALE PIN BODY PLATING : 200μ [5.08μ] min. Sn per ASTM B545 Type 1 over 100μ [2.54μ] min. Ni per SAE AMS-QQ-N-290 • 4-FINGERED COLLET CONTACT: BeCu per UNS C17200 ASTM-B194-01 In addition to the standard • COLLET CONTACT PLATING : 10μ [0.254μ] min. Au per MIL-G-45204 over 50μ CUSTOMIZATION: specializes in custom designproducts shown on this page, Aries and production. [1.27μ] min. Ni per SAE AMS-QQ-N-290 Special materials, platings, sizes, and configurations can be furnished, depending on the quantity. NOTE: Aries reserves the • MALE PIN : Phosphor Bronze 544 UNS C5400 ASTM B139-90 right to change product general specifications without notice. • MALE PIN PLATING : 200μ [5.08μ] min. Sn per ASTM B545 Type 1 over 100μ [2.54μ] min. Ni per SAE AMS-QQ-N-290 • COLLET CONTACT CURRENT RATING : 3 amps ORDERING INFORMATION • OPERATING TEMPERATURE : 221°F [105°C] Specify P/N 44-647-10 • INSERTION FORCE: 180g/pin; based on a 0.018 [0.46] dia. test lead • WITHDRAWAL FORCE: 90g/pin; based on a 0.018 [0.46] ALL DIMENSIONS: INCHES [MILLIMETERS] dia. test lead ALL TOLERANCES: ±0.005 [0.13] UNLESS OTHERWISE SPECIFIED • NORMAL FORCE: 140g/pin; based on a 0.018 [0.46] dia. test lead CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS MOUNTING CONSIDERATIONS • SUGGESTED PCB HOLE SIZE: 0.028 ±0.002 [0.71 ±0.05] dia. Bristol, PA 19007-6810 USA TEL (215) 781-9956 • FAX (215) 781-9845 WWW.ARIESELEC.COM • INFO@ARIESELEC.COM PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED 10016 Rev. AA