44-6553-18

Series X55X High-Temperature Universal Zero-Insertion-Force DIP Test Socket FEATURES • Universal Test Socket accepts devices on 0.300 to 0.600 [7.62 to 15.24] centers • All pin count sockets go into PCB with either 0.300 or 0.600 [7.62 or 15.24] centers • Contacts are normally closed to eliminate dependence on plastic to sustain contact • Socket handle can be configured with closed contacts (on) when in the UP or DOWN position, and can be mounted on either the right or left side • Sockets can be soldered into PCBs. Socket fits into Aries Test Socket Receptacle on Data Sheet 10003 GENERAL SPECIFICATIONS • SOCKET BODY: natural UL 94V-0 glass-filled Polyetheretherketone (PEEK) • HANDLE: Stainless Steel CUSTOMIZATION: In addition to the standard products shown • CONTACTS: BeNi 360, 1/2-hard on this page, Aries specializes in custom design and production. • CONTACT PLATING : 50μ [1.27μ] NiB Special materials, platings, sizes, and configurations can be furnished, depending on the quantity. NOTE: Aries reserves the • CONTACT CURRENT RATING : 1 amp right to change product general specifications without notice. • OPERATING TEMPERATURE : -67°F [-55°C] min.; 482°F [250°C] max. • RETENTION FORCE ( closed): 55g/pin based on a 0.020 [0.51] dia. test lead • INSULATION RESISTANCE: 1000 mΩ min. ORDERING INFORMATION • DIELECTRIC WITHSTANDING VOLTAGE : 1000 VAC XX-X55X-1 8 • LIFE CYCLE: 25,000 to 50,000 cycles Pins NiB (Spinodal) Plating • ACCEPTS LEADS: 0.015-0.045 [0.38-1.14] wide, 24, 28, 32, 36, Solder Pin Tail 0.110-0.280 [2.79-7.11] long 40, 42, 44, 48 Handle Options MOUNTING CONSIDERATIONS Row-to-Row Spacing (btm) 1 = Left, up is on • See Socket Footprint below 3 = 0.300 [7.62] 2 = Right, up is on 6 = 0.600 [15.24] (std) 3 = Left, down is on 4 = Right, down is on (std) NOTE: ‘on’ = closed contacts ALL DIMENSIONS: INCHES [MILLIMETERS] ALL TOLERANCES: ±0.005 [0.13] UNLESS OTHERWISE SPECIFIED “A” = (NO. OF PINS PER ROW x 0.100 [2.54]) + 0.590 [14.99] “B” = (NO. OF PINS PER ROW -1) x 0.100 [2.54] “C” = (NO. OF PINS PER ROW x 0.100 [2.54] + 0.415 [10.54] DO NOT USE THESE SOCKETS IN A BURN-IN OVEN WITH THE SOCKET CONTACTS IN THE OPEN POSITION, AS IT WILL DAMAGE THE SOCKET. CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS Bristol, PA 19007-6810 USA TEL (215) 781-9956 • FAX (215) 781-9845 WWW.ARIESELEC.COM • INFO@ARIESELEC.COM PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED 10002 Rev. AA