T-516AS

P/N T-90 DIP Extractor Tool FEATURES • An extremely handy, economical tool for removing ICs from DIP sockets. • Reduces the risk of pin damage associated with stubborn IC removal as well as finger injury. CUSTOMIZATION: In addition to the standard products shown on this page, Aries specializes in custom design and production. Special materials, platings, sizes, and configurations can be furnished, depending on the quantity. NOTE: Aries reserves the right to change product general specifications without notice. P/N T-516AS DIP-R-SIZER™ Tool FEATURES • The DIP-R-SIZER™ tool straightens DIP IC legs on 0.300 [7.62] or 0.600 [15.24] centers with one easy squeeze. • Place 0.300 [7.62] center ICs in one side of tool, 0.600 [15.24] center ICs in the other and just squeeze the handles together. • Brings leads into tolerance – 0.320 [8.12] or 0.620 [15.74] • The T-561AS tool is constructed from anti-static plastic. ALL DIMENSIONS: INCHES [MILLIMETERS] SEE DATA SHEETS 16005 FOR SERIES 680 PROGRAMMABLE HEADER. SEE DATA SHEETS 16004 FOR SERIES 675 PROGRAMMABLE HEADER. CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS ORDERING INFORMATION Specify P/N T-90 DIP Extractor Specify P/N T-516AS DIP-R-Sizer™ Bristol, PA 19007-6810 USA TEL (215) 781-9956 • FAX (215) 781-9845 WWW.ARIESELEC.COM • INFO@ARIESELEC.COM PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED 22003 Rev. AB