ARTESYN
ADN-C SERIES
120 - 960 Watts
The ADN-C series of single-phase DIN rail mounting
AC-DC power supplies provides a compact, efficient and
easy-to-use solution for industrial applications. Their slim
form factor helps to maximize per-rail power density and front
panel status LEDs facilitate diagnostics and trouble shooting.
Features include active PFC, adjustable output, overvoltage
with auto protection, parallel operation capability, and a five
year warranty. This DIN rail power supply series is perfect
for applications such as machine control, process control,
conveying equipment, material handling, vending machines,
and packaging equipment, as well as test and measurement
and gaming applications.
SPECIAL FEATURES
DC OK relay
Five year warranty
Screw terminal connections
High efficiency > 90% typical
Full power at 60 °C
Power Boost™
Industrial grade design (metal case
and mounting clip)
MTBF > 450,000h demonstrated
at 40 °C
Active PFC > 0.92
Adjustable output
Overvoltage protection with
autorecovery
Continuous short circuit and overload
protection
SEMI F47 Sag Immunity
DATA SHEET
Total Power:
120-960 Watts
Input Voltage:
85-264 Vac,
90-375 Vdc
# of Outputs:
Single
Parallel operation capability
INDUSTRIAL
RoHS compliant
80 PLUS® compliant (ADN20-24-
1PM-C model)
No tools required for mounting
SAFETY
UL508, cULus Listed
UL 60950-1, cURus
IEC60950-1
Class I, Div 2 Hazardous Locations
ATEX Certified on selected models
IP20
CE
Three status LEDs (Input, Output,
Alarm)
©2020 Advanced Energy Industries, Inc.
ADN-C SERIES
ELECTRICAL SPECIFICATIONS
Input
AC input range
Nominal: 100-240 Vac/115-230 Vac/85-264 Vac
DC input range
90-375 Vdc
Frequency
47-67 Hz, 400 Hz
Efficiency
> 90%
Inrush current (typical)
< 15A or < 60A depending on model
PFC
Active, better than 0.92
Output
Nominal voltage
24 Vdc (22.5-28.5 Vdc Adj): ADN5-24-1PM-C & ADN10-24-1PM-C
24 Vdc (24-28 Vdc Adj): ADN20-24-1PM-C & ADN40-24-1PM-C
Initial voltage setting
24.5 V ± 1%
Hold-up time
> 20 ms at full load (100 Vac Input @ Tamb = +25 °C)
Voltage regulation
< ± 2% (combination line, load, time and temperature related changes)
Ripple
< 50 mVpp: ADN5-24-1PM-C & ADN10-24-1PM-C
< 100 mVpp: ADN20-24-1PM-C & ADN40-24-1PM-C
Back EMF immunity
< 35 Vdc
Power Boost™
1.5 x Nominal current for 2 or 4 seconds depending on model
Short circuit current
1.5 x Nominal current at near zero volts at short circuit condition
Parallel operation
Switch selectable single unit or parallel unit operation. Units will not be damaged by parallel
operation (regardless of switch position setting)
Ouput noise suppression
Radiated EMI values below EN61000-6-2
Overvoltage protection
> 30.5 Vdc but < 33 Vdc, auto recovery
Line and load regulation
< 0.5%
Time and temperature drift
< 1%
GENERAL SPECIFICATIONS
EMC emissions
EN61000-6-2:2001, EN61000-6-3:2001, Class B EN55011, EN55022 Radiated and Conducted including Annex. A,
EN61000-3-2
EMC immunity
EN61000-6-1:2001, EN61000-6-2:2001, EN61000-4-2 Level 4, EN61000-4-3 Level 3, EN61000-4-6 Level 3,
EN61000-4-4 Level 4 input and level 3 output. EN61000-4-5 Installation class 4, EN61000-4-11, IEC 61000-4-34
voltage dip immunity standard
Warranty
5 Years
General protection safety
Protected against continuous short-circuit, continuous overload, continous open circuit. Protection Class 1 (IEC536),
degree of protection IP20 (IEC60529) Safe low voltage: SELV (acc. IEC60950-1)
Status indicators
Visual: Three (3) status LEDs (Input, Output, Alarm) Relay: N.O. contact rated 200 mA/50 Vdc
2 advancedenergy.com
ADN-C SERIES
LED DIAGNOSTICS
LED
OK
Loss of Ac
Low Ac
No Dc
High Load
Overload
Hot
Too Hot
Input
Green
---
Yellow
Green
Green
Green
Green
Green
Output
Green
---
Green
---
Yellow
Yellow
Green
---
Alarm
---
---
---
Red
Yellow
Red
Yellow
Yellow
ENVIRONMENTAL SPECIFICATIONS
Storage temperature
-40 °C to + 85 °C; All models
Operating temperature
From -25 °C to 70 °C. Derate starting at 60 °C; All models
Up to 50% load permissable with horizontal or on top mounting orientation
OTHER FEATURES
External fusing
Not required. Unit provides internal fuse (not accessible)
Mounting orientation
Standard: Vertical, Optional: Horizontal or on Top
Simple snap-on to DIN TS35/7.5 or TS35/15 rail system
Ventilation
Normal convection, No fan required
Cooling spacing
ADN5-24-1PM-C & ADN10-24-1PM-C:
ADN20-24-1PM-C:
ADN40-24-1PM-C:
Connections
Input: Screw terminals, connector size range: 16-10 AWG (1.5 - 6 mm2) for solid conductors
Output: Two terminals per output, connector size range: 16-10 AWG (1.5 - 6 mm2) for solid conductors
One terminal per output for ADC40-24-1PM-C, connector size range: 7-6 AWG (10.6 - 13 mm2) for solid
conductors
15 mm in front, 25 mm above and below, 10 mm left and right
15 mm in front, 40 mm above and below, 10 mm left and right
15 mm in front, 25 mm above and below, 25 mm left and right
ORDERING INFORMATION
Model Number
MTBF
Power
Input Voltage
Weight
Current
Case Type
ADN5-24-1PM-C
120 W
85-264 Vac
90-375 Vdc*
1.10 lbs (500 g)
5 A @ 24 Vdc
Metal with mounting clip
550,000 hours
ADN10-24-1PM-C
240 W
85-264 Vac
90-375 Vdc*
1.98 lbs (900 g)
10 A @ 24 Vdc
Metal with mounting clip
550,000 hours
480 W
85-264 Vac
90-375 Vdc*
2.6 lbs (1200 g)
20 A @ 24 Vdc
Metal with mounting clip
450,000 hours
960 W
100-240 Vac
6.0 lbs (2750 g)
40 A @ 24 Vdc
Metal with mounting clip
500,000 hours
ADN20-24-1PM-C
1
ADN40-24-1PM-C
Demonstrated at 40 °C
*No UL listed for DC input
1
80 PLUS certified
advancedenergy.com
3
ADN-C SERIES
DIMENSIONS
Height
Width
Depth
ADN5-24-1PM-C
4.85 in (123 mm)
1.97 in (50 mm)
4.37 (111 mm)
ADN10-24-1PM-C
4.85 in (123 mm)
2.36 in (60 mm)
4.37 (111 mm)
ADN20-24-1PM-C
4.85 in (123 mm)
3.42 in (87 mm)
4.96 in (126 mm)
ADN40-24-1PM-C
4.85 in (123 mm)
7.09 in (180 mm)
4.81 in (122 mm)
MECHANICAL DRAWING
D
W
+
-
+
OK
24 VDC / 5 A
Input
Output
Alarm
22.5 - 28/5 Vdc
Single
H
Parallel
ADN5-24-1PM-C
C
U
L
US LISTED
115/230 V ~ 2.2/1.0 A 50/60 HZ
N
4 advancedenergy.com
L
ABOUT ADVANCED ENERGY
Advanced Energy (AE) has devoted more than three
decades to perfecting power for its global customers. AE
designs and manufactures highly engineered, precision
power conversion, measurement and control solutions for
mission-critical applications and processes.
Our products enable customer innovation in complex
applications for a wide range of industries including
semiconductor equipment, industrial, manufacturing,
telecommunications, data center computing, and medical.
With deep applications know-how and responsive service
and support across the globe, we build collaborative
partnerships to meet rapid technological developments,
propel growth for our customers, and innovate the future
of power.
For international contact information,
visit advancedenergy.com.
powersales@aei.com (Sales Support)
productsupport.ep@aei.com (Technical Support)
+1 888 412 7832
Specifications are subject to change without notice. Not responsible
for errors or omissions. ©2020 Advanced Energy Industries, Inc. All rights
reserved. Advanced Energy®, AE® and Artesyn™ are U.S. trademarks
of Advanced Energy Industries, Inc.
ENG-ADN-C Single-Phase-235-01 10.16
