ADQ500-48S12B-6L

ARTESYN ADQ500 SERIES 500 Watt Quarter Brick DC-DC Converter ADQ500 series quarter-brick isolated DC-DC converters produce a single fully regulated 12 V output. Rated at 500 watts, these converters can deliver up to 42 amps output current and have no minimum load requirement. They have an input voltage range of 36 to 75 V and are primarily designed for use with standard 48 V supplies in computing and server applications, as well as regulated 48V supplies in communications equipment. DATA SHEET Total Power: 500 Watt (target) (12 V @ 42 A) Input Voltage: 36 - 75 V # of Outputs: Single (12 V Nom) SPECIAL FEATURES  500 W continuous power  Ultra high efficiency: 95.5% typical at half load  36-75 Vdc Telecomm input range  Baseplate optimized for contact cooling or heatsink mounting  Trim -20% to +10% Vout  Open frame version optimised for air cooling  RoHS 6 compliant  UL94 V-0 materials  DOSA footprint compliant  PMBus Rev. 1.2 compliant  Two year warranty (consult factory for extended terms) SAFETY  TUV/CE 62368-1  UL/cUL 60950-1  Low ripple and noise  Fixed switching frequency  High capacitive load capability  Pre-bias start-up capability  High reliability ©2020 Advanced Energy Industries, Inc. ADQ500 ELECTRICAL SPECIFICATIONS Input Input voltage 36 - 75 Vdc Input surge 100 V / 100 mSec Input UVLO Turn-on: 35 Vdc Turn-off: 33 Vdc Hysteresis: 2 Vdc I/O insulation Basic insulation I/O isolation 1500 Vdc Efficiency (48 Vin, 25 °C ambient) 94.5% @ 100% load (95.5% @ 50% load) Output Output voltage 12 V nominal set point Output voltage regulation Line regulation: 20 mV typical Load regulation: 20 mV typical Temperature regulation: 0.002% / °C typical Output current maximum 42 A Noise/ripple 200 mVpp Overtemperature protection 120 °C hot spot Overvoltage protection Method / OVP operation 13.8 - 16 V window Auto restart / 130% Vout Overcurrent protection voltage Method / OCP operation 46.5 A - 59 A window Hiccup at 140% Iout Output voltage control -20% to +10% Vout Trim Control Enable TTL compatible (negative logic) Switching frequency 175 KHz Pre-bias start-up 0% to 95% Vout ENVIRONMENTAL SPECIFICATIONS Operating ambient temperature range -40 °C to +85 °C Storage temperature -55 °C to +105 °C Baseplate operating temperature -40 °C to +100 °C (no power derating) MTBF 1 Million hours (target) 2 advancedenergy.com ADQ500 MECHANICAL DRAWING - OPEN MODULE MECHANICAL DRAWING - BASEPLATE MODULE UNIT: mm [inch] BOTTOM VIEW: pin on upside L = 3.80 mm TOLERANCE: X.X mm ± 0.5 mm [X.X inch ± 0.02 inch] x.xx mm ± 0.25 mm [ X.X inch ± 0.01 inch] advancedenergy.com 3 ADQ500 ORDERING INFORMATION Model number Input voltage Output voltage set point Output current Efficiency ADQ500-48S12-6L 36 - 75 Vdc 12 Vdc 42 A 94.5% (full load) ADQ500-48S12B-6L 36 - 75 Vdc 12 Vdc 42 A 94.5% (full load) ADQ500-48S12-6LI 36 - 75 Vdc 12 Vdc 42 A 94.5% (full load) ADQ500-48S12B-6LI 36 - 75 Vdc 12 Vdc 42 A 94.5% (full load) B = Baseplate I = PMBus interface version PIN ASSIGNMENTS Pin # Name Funtion 1 +Vin Positive input voltage 2 Remote On/Off Remote control 3 -Vin Negative input voltage 4 -Vo Negative output voltage 5 -Sense Remote sense negative 6 Trim Voltage adjustment 7 +Sense Remote sense positive 8 +Vo Positive output voltage 9 C2 Digital 10 Sig_Gnd Digital 11 Data Digital 12 SMBAlert Digital 13 Clock Digital 14 Addr1 Digital 15 Addr0 Digital Device code suffix 4 advancedenergy.com L -4 4.8 mm ± 0.5 mm -6 3.8 mm ± 0.5 mm -8 2.8 mm ± 0.25 mm None 5.8 mm ± 0.5 mm ABOUT ADVANCED ENERGY Advanced Energy (AE) has devoted more than three decades to perfecting power for its global customers. AE designs and manufactures highly engineered, precision power conversion, measurement and control solutions for mission-critical applications and processes. Our products enable customer innovation in complex applications for a wide range of industries including semiconductor equipment, industrial, manufacturing, telecommunications, data center computing, and medical. With deep applications know-how and responsive service and support across the globe, we build collaborative partnerships to meet rapid technological developments, propel growth for our customers, and innovate the future of power. For international contact information, visit advancedenergy.com. powersales@aei.com (Sales Support) productsupport.ep@aei.com (Technical Support) +1 888 412 7832 Specifications are subject to change without notice. Not responsible for errors or omissions. ©2020 Advanced Energy Industries, Inc. All rights reserved. Advanced Energy®, AE® and Artesyn™ are U.S. trademarks of Advanced Energy Industries, Inc. ENG-ADQ500-235-01 12.14