AFC5-05D12-F

AFC5-F SERIES Dual output • • • • • • Linear regulated outputs Very low output noise 2 x 1 x 0.375 inch package Six sided shielding Short circuit protection UL94V-0 case The AFC5-F Series of fixed frequency DC/DC converters provide 5 Watts of power, low output noise and tight output regulation, all housed within a 2 x 1 inch case. Six sided shielding to negate radiated noise and a non conductive base to prevent shorting to the PCB are standard features. Short circuit protection, isolation voltage of 500VDC, and a voltage accuracy of ±1% are included to offer the best possible solution to a system designer’s low power needs. Ideal applications for the AFC5-F are data acquisition, digital to analog and analog to digital conversion. AFC5-F Series DC/DC converters are suitable for a wide range of general industrial applications, especially where low noise levels are required. [ 2 YEAR WARRANTY ] SPECIFICATION OUTPUT SPECIFICATIONS Voltage accuracy Voltage balance Line regulation Load regulation Total error band Ripple and noise 5Hz to 20MHz Transient response Temperature coefficient Minimum output current Short circuit protection All specifications are typical at nominal input, full load at 25°C unless otherwise stated EMC CHARACTERISTICS ±1.0% ±1%, max. Radiated emissions EN55022, EN55011, FCC Level A GENERAL SPECIFICATIONS Efficiency Isolation voltage Switching frequency Case material Flammability rating Input to output Fixed, See Note 3 64% to 70% 500VDC, min. 20kHz, min. LL to HL NL to FL See Note 2 ±0.5%, max. ±0.5% ±3.0% 15mV pk-pk, typ., 1mV rms, typ. 30mV pk-pk, max. Black anodised aluminium with non-conductive base Meets UL94V-0 30g (1.1oz) Dual output 580,000 hours 50% to 100% load step 50µs, max. Weight MTBF 0A ENVIRONMENTAL SPECIFICATIONS ±0.03%/°C, max. Output to common +output to –output Indefinite 10s, max. Thermal performance INPUT SPECIFICATIONS Input voltage range Input filter Input overvoltage Reflected ripple current No damage, 5V nominal No damage, 12V nominal 5VDC 12VDC 4.65V to 5.25VDC 10.8V to 13.2VDC LC filter 7V, 10s 15V, 10s 400mA pk-pk Relative humidity Altitude Vibration, See Note 4 Operating, see curve 0°C to +105°C Non-operating –55°C to +125°C Derating See chart Cooling Free-air convection cooled Non-condensing Operating Non operating 5Hz to 500Hz 5% to 95% RH 10,000 feet max. 40,000 feet max. 2.4G rms (approx.) PAGE 1 SPECIAL APPLICATION MODELS | 5W DC/DC 5 Watt Nominal input DC/DC converters INPUT VOLTAGE 5VDC 5VDC 12VDC 12VDC OUTPUT VOLTAGE ±12VDC ±15VDC ±12VDC ±15VDC OUTPUT CURRENT ±150mA ±150mA ±150mA ±150mA INPUT CURRENT NO LOAD 37mA 44mA 14mA 17mA FULL LOAD 1.16A 1.45A 0.48A 0.61A (1) TYPICAL EFFICIENCY 65% 65% 65% 65% MODEL NUMBER AFC5-05D12-F AFC5-05D15-F AFC5-12D12-F AFC5-12D15-F Notes 1 2 Maximum value at nominal line voltage. Error band is defined as the static output regulation at 25°C, including initial setting accuracy, input voltage within stated limits and output current within stated limits. Fixed frequency design provides for easier input filtering and better noise performance. Three orthogonal axes, random vibration, 10 minute test for each axis. PIN CONNECTIONS PIN NUMBER 1 2 3 4 5 DUAL OUTPUT + Input – Input + Output Common – Output 3 4 80% 70% 0.22 Min. (5.60) CASE R 0.375 Max. (9.500) 60% 0.040 Dia. (1.000) 0.60 (15.20) 0.200 (5.100) 0.800 (20.300) 3 BOTTOM VIEW 4 50% 0% 25% 50% 75% 100% OUTPUT LOAD 0.400 (10.200) 2 1 0.100 0.500 (2.500) (12.700) 1.00 (25.40) Typical Efficiency V's Output Load (Nominal Input) 5 2.00 (50.80) ALL DIMENSIONS IN INCHES (mm) Tolerance .xx = ±0.02 .xxx = ±0.005 0.300 (7.600) 80% DERATING CURVE Output Power (Watts) 50°C 60°C 75°C 70% 5W Maximum Input Voltage Nominal Input Voltage Minimum Input Voltage 60% NATURAL CONVECTION COOLING 4.65 50% 10.8 5.00 12.0 5.25 13.2 INPUT VOLTAGE 0W 0°C 10°C 20°C 30°C 40°C 50°C 60°C 70°C 80°C 105°C 90°C 100°C 110°C Typical Efficiency V's Input Voltage (Full Output Load) DS_AFC5-F Dual_20020807.PDF http://www.artesyn.com PAGE 2