ALD11G48-6L

Embedded Power for Business-Critical Continuity Rev. 08.04.11_19 ALD15 Series 1 of 3 ALD15 Series 15 Amps Total Power: 35 Watts Input Voltage: 48V # of Outputs: Single Electrical Specifications Input Special Features • High Efficiency • -40 ºC to + 85 ºC ambient air operation • 1.30” x 0.90” x 0.35” TH or SMT package • High capacitive load limit on start-up • Industry standard feature sets: UVLO, OVP, OCP, OTP, on/off enable, remote sense, output trim • Basic insulation • Regulation to zero load • Fixed frequency switching • EU directive 2002/95/EC compliant for RoHS Input ra­nge: Input surge: Efficiency: 36 to 75 Vdc 100 V / 100 ms 90.5% @ 12 V Output Line regulation: Load regulation: ± 0.1% Vo (typical) ± 0.1% Vo (typical) Noise/ripple1: 40 mVp-p (typical) Remote sense: Up to 10% of Vo Transient response: 3% Vo (typical) deviation 50% to 75% load change 80 µs setting time (typical) Overvoltage protection: 125% Vo typical (autorecovery) Overcurrent protection: 115% Io typical (autorecovery) Overtemperature protection: 115 ºC average PCB temperature (autorecovery) Switching frequency: Fixed frequency Isolation voltage: 1500 Vdc minimum (2000 Vdc ALD10F48N) Control Voltage adjust: 90 to 110% Vo Enable: TTL compatible Environmental Specifications Safety • UL, cUL: 60950-1 • TUV: EN60950-1 Ambient air operating temperature range: Storage temperature: MTBF: -40 °C to +85 °C -40 °C to +125 °C 1 million hours Embedded Power for Business-Critical Continuity Rev. 08.04.11_19 ALD15 Series 2 of 3 Ordering Information Output Voltage Output Current Efficiency2 Model Number 36 - 75 V 36 - 75 V 36 - 75 V 36 - 75 V 36 - 75 V 36 - 75 V 36 - 75 V 12.0 V 5.0 V 3.3 V 2.5 V 1.8 V 1.5 V 1.2 V 2.75 A 7.00 A 10.00 A 11.00 A 13.00 A 15.00 A 15.00 A 90.5% 91% 90% 89% 87% 85% 84% ALD03B48(N)-(L)/(6L)/(SL) ALD07A48(N)-(L)/(6L)/(SL) ALD10F48(N)-(L)/(6L)/(SL) ALD11G48(N)-(L)/(6L)/(SL) ALD13Y48(N)-(L)/(6L)/(SL) ALD15M48(N)-(L)/(6L)/(SL) ALD15K48(N)-(L)/(6L)/(SL) 0.30 [7.62] Input Voltage Notes: Efficiency values taken at nominal imput full load condition, 25 ºC ambient temperature. TABLE2 0.15 [3.81] ALDxxx48-6L,ALDxxx48N-6L 3.7±0.3 ALDxxx48-8L,ALDxxx48N-8L 2.8±0.3 10.5 0.60 [15.31] 0.60 [15.24] (0.15 [3.81]x4) Options MODEL PIN"L" mm 5.0±0.3 ALDxxx48-L,ALDxxx48N-L “N” = Designates Negative Logic Enable (default is Positive Enable with no suffix “N” required) “L” = RoHS compliant “-6L” POINT = 3.7 mm nominal pin length (default is 5 mm nominal pin length with no suffix “-6” required), RoHS compliant “-SL” = Surface Mount Termination (default is thru hole termination with no suffix “-S” required) RoHS compliant. STRL designates Taped and Reeled option for SMT "L"(SEE TABLE 2 ) Ø0.04 [1.0] (6x) Ø0.06 [1.60] 2X 0.15 [3.81] 0.15 [3.81] SUGGESTED PICK UP Mechanical Drawings 12.19 Pin Assignments Through-hole Termination 10.5 0.16 [4.0] 0.15 [3.81] 0.09 [2.2] 0.30 [7.62] 0.60 [15.31] ALDxxx48-L,ALDxxx48N-L PIN"L" mm 5.0±0.3 ALDxxx48-6L,ALDxxx48N-6L 3.7±0.3 ALDxxx48-8L,ALDxxx48N-8L 2.8±0.3 SUGGESTED PICK UP POINT "L"(SEE TABLE 2 ) Ø0.04 [1.0] (6x) 12.19 0.16 [4.0] 0.34 [8.6 ±0.5] 0.1 [2.5]max. 0.1 [2.54] Ø0.06 [1.60] 2X 0.9 [22.86±0.5] TABLE2 MODEL 1.10 [27.94] 1.30 [33.02±0.5] 0.09 [2.2] 0.15 [3.81] 0.15 [3.81] 0.60 [15.24] [8.6 ±0.5] (0.150.34 [3.81]x4) 0.1 [2.5]max. 0.1 [2.54] Single Output PIN 1 1.10 [27.94] 1.30 [33.02±0.5] 0.9 [22.86±0.5] 10.5 12.19 10.5 0.16 [4.0] 0.09 [2.2] 0.15 [3.81] 1.10 [27.94] 1.30 [33.02±0.5] 0.30 [7.62] 0.9 [22.86±0.5] 0.60 [15.31] 0.60 [15.24] 0.34 [8.6 ±0.5] (0.15 [3.81]x4) ] 0.1 [2.5]max. 0.1 [2.54] SUGGESTED PICK UP POINT 0.15 [3.81] 0.15 [3.81] 0.15 [3.81] 0.60 [15.31] 0.60 [15.24] (0.15 [3.81]x4) PIN 1 0.30 [7.62] Surface Mount Termination c 0.15 4 SUGGESTED PICK UP POINT 1. +Vin 2. Enable 3. -Vin 4. -Vout 5. -Sense 6. Trim 7. +Sense 8. +Vout Notes: 1. 20 mHz bandwidth. External 10 µF tant. capacitor in parallel with 0.1uF ceramic capacitor placed across + Vout and -Vout; 33 µF e-cap or equivalent placed across +Vin and -Vin. 2. Efficiency measurements taken at full load, nominal line and TA = 25 °C 3. All specifications are typical at nominal line, full load and TA = 25 °C unless otherwise noted. 4. Mechanical drawings are for reference only. Dimensions are in inches [mm]. Mechanical tolerance ± 0.020 [± 0.50] 5. Technical Reference Notes should be consulted for detailed information when available. 6. All specifications subject to change without notice. 7. Warranty 2 years. 8. The through-hole terminated modules are intended for wave soldering process. 0.09 [2.2] 0.34 [8.6 ±0.5] 0.1 [2.5]max. 1.10 [27.94] 1.30 [33.02±0.5] 0.16 [4.0] 0.1 [2.54] c 0.15 4 Embedded Power for Business-Critical Continuity FOR SMD VERSION Americas Mechanical Drawings 5810 Van Allen Way Carlsbad, CA 92008 USA Telephone: +1 760 930 4600 Facsimile: +1 760 930 0698 0.15 [3.81] 0.15 [3.81] 0.15 [3.81] 0.15 [3.81] Surface Mount RECOMMEND PAD LAYOUT FOR SMD VERSION (VIEW FROM TOP SIDE OF CUSTOMER PCB) 0.30 [7.62] 0.60 [15.31] 0.9 [22.86] Europe (UK) 0.60 [15.31] 0.9 [22.86] 0.60 [15.24] (0.15 [3.81]x4) 0.15 [3.81] 0.10 [2.54] ØA(2X) ØB(5X) RECOMMEND PAD LAYOUT FOR THROUGH HOLE VERSION (VIEW FROM TOP SIDE OF CUSTOMER PCB) Through Hole 0.15 [3.81] 0.10 [2.54] 3.00](8X ) Ø0.12 [Ø 1.30 [33.02] 1.10 [27.94] 0.60 [15.24] ([0.15 3.81]x3) 1.30 [33.02] 1.10 [27.94] 0.30 [7.62] Recommended PAD/ Hole Pattern Rev. 08.04.11_19 ALD15 Series 3 of 3 TABLE1 HOLE & PAD DIAMETER FOR CUSTOMER (RECOMMENDED) ØA ØB HOLE DIAMETER (Ød) PAD DIAMETER (ØD) Ø1.9 Ø2.9 Ø2.3 Ø1.3 Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX United Kingdom Telephone: +44 (0) 1384 842 211 Facsimile: +44 (0) 1384 843 355 Asia (HK) 14/F, Lu Plaza 2 Wing Yip Street Kwun Tong, Kowloon Hong Kong Telephone: +852 2176 3333 Facsimile: +852 2176 3888 For global contact, visit: www.Emerson.com/EmbeddedPower 10.5 Recommended Pick-up Point techsupport.embeddedpower @emerson.com While every precaution has been taken to ensure accuracy and completeness in this literature, Emerson Network Power assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions. Emerson Network Power. The global leader in enabling business-critical continuity. SUGGESTED PICK UP POINT AC Power Connectivity DC Power Embedded Computing 12.19 Embedded Power Monitoring Outside Plant Power Switching & Controls Precision Cooling Racks & Integrated Cabinets Services Surge Protection EmersonNetworkPower.com Emerson Network Power and the Emerson Network Power logo are trademarks and service marks of Emerson Electric Co. ©2011 Emerson Electric Co. Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Artesyn Embedded Technologies: ALD07A48N-L ALD07A48N-SL ALD07A48-SL ALD10F48N-L ALD07A48N-6L ALD10F48N-6L ALD03B48N-6L ALD03B48N-L ALD03B48-SL ALD11G48-6L ALD11G48N-L ALD13Y48N-6L ALD13Y48N-L ALD15K48N-L