ASA01B48-M

POWER ASA 6W-M Series 6 Watts Data Sheet Total Power: 6 Watts Input Voltage: 12 V, 24 V or 48 V # of Outputs: Single, Dual Special features ƒƒ 4000 Vac reinforced insulation ƒƒ Medical safety to UL/cUL/EN/ IEC 60601-1 3rd Edition ƒƒ 2 MOOP rated ƒƒ Wide 2:1 input voltage range Electrical Specifications ƒƒ Fully regulated output voltage Input ƒƒ Low leakage current Input ra­nge 9 - 18 Vdc; 18 - 36 Vdc; 36 - 75 Vdc ƒƒ Operating temperture range –40 °C to +75 °C (with derating) Efficiency 80% ƒƒ Input filter meets EN 55022, class A and FCC, level A ƒƒ Overload protection ƒƒ 1.25” x 0.8” package ƒƒ RoHS compliant ƒƒ Three-year product warranty Safety ƒƒ cUL/UL60950-1, CSA C22.2 No. 60950-1-03 Output Voltage tolerance ±1.0% Line regulation ±0.5% Load regulation 1.0% Noise/ripple 180 mV OCP and S/C protection Foldback, auto-cover Switching frequency 150 KHz Temperature coefficient ±0.05 /°C Isolation I/O isolation 4000 Vac rms ƒƒ UL60601-1, CSA C22.2 No.601-1 Insulation resistance 10 Gohm ƒƒ IEC/EN 60950-1, IEC/EN 60601-1 3rd Edition, 2 MOOP Insulation capacitance 13 pF ƒƒ cUL/UL60950-1 certificate Environmental Specifications ƒƒ UL60601-1 UL certificate Operating ambient temperature range -40 °C to +75 °C Storage temperature -50 °C to +125 °C Humidity 5% to 95% (non-condensing) MTBF 1,000,000 hours ASA 6W-M Series Data Sheet Ordering Information Model Number Input Voltage Output 1 Voltage ASA01A12-M 9 - 18 V 5V@1A Output 2 Voltage Maximum Power 5W ASA01B12-M 9 - 18 V 12 V @ 0.5 A ASA01BB12-M 9 - 18 V 12 V @ 0.25 A -12 V @ 0.25 A 6W 6W ASA01CC12-M 9 - 18 V 15 V @ 0.2 A -15 V @ 0.2 A 6W ASA01A24-M 18 - 36 V 5V@1A 5W ASA01B24-M 18 - 36 V 12 V @ 0.5 A 6W ASA01BB24-M 18 - 36 V 12 V @ 0.25 A -12 V @ 0.25 A 6W ASA01CC24-M 18 - 36 V 15 V @ 0.2 A -15 V @ 0.2 A 6W ASA01A48-M 36 - 75 V 5V@1A 5W ASA01B48-M 36 - 75 V 12 V @ 0.5 A 6W ASA01BB48-M 36 - 75 V 12 V @ 0.25 A -12 V @ 0.25 A 6W ASA01CC48-M 36 - 75V 15 V @ 0.2 A -15 V @ 0.2 A 6W Please contact Artesyn Embedded Power for information on other output voltages, power ranges and configurations. Physical Characteristics 3.9 10.5 [0.41] [0.15] 0.2 [0.008] Mechanical Drawing Case Size 31.8 x 20.3 x 12 mm (1.25 x 0.8 x 0.47 inches Case Material Non-Conductive Black Plastic (flammability to UL 94V-0 rated) Weight 18 g 0.60 [0.024] Pin Connectors 12 Bottom View 15 23 20.32 [0.80] 2.54 [0.10] 31.8 [1.25] Pin Number Single Output Dual Output 1 +Vin +Vin 11 No Pin Common 12 -Vout No Pin 13 +Vout -Vout 15 No Pin +Vout 23 -Vin -Vin 24 -Vin -Vin 13 5.08 [0.20] 2.0 [0.08] 2.54 [0.10] 24 20.3 [0.80] 11 15.22 [0.60] 1 All dimensions in mm (inches) Tolerance: X.X±0.25 (X.XX±0.01) X.XX±0.13 (X.XXX±0.005) Pin pitch tolerance: ±0.25 (±0.01) Pin dimension tolerance: ±0.1 (±0.004) WORLDWIDE OFFICES Americas Europe (UK) Asia (HK) 2900 South Diablo Way Suite B100 Tempe, AZ 85282, USA +1 888 412 7832 Ground Floor Offices, Barberry House 4 Harbour Buildings, Waterfront West Brierley Hill, West Midlands DY5 1LN, UK +44 (0) 1384 842 211 14/F, Lu Plaza 2 Wing Yip Street Kwun Tong, Kowloon Hong Kong +852 2176 3333 Artesyn Embedded Technologies, Artesyn Embedded Power, Artesyn, and all Artesyn related logos are trademarks and service marks of Artesyn Embedded Technologies, Inc. All other names and logos referred to are trade names, trademarks, or registered trademarks of their respective owners. Specifications are subject to change without notice. © 2019 Artesyn Embedded Technologies, Inc. All rights reserved. For full legal terms and conditions, please visit www.artesyn.com/legal. www.artesyn.com For more information: www.artesyn.com For support: productsupport.ep@artesyn.com ASA6W-M DS 21Nov2019