BXA3-12S15

BXA3 Series DC/DC CONVERTERS • • • • • • • • Single and dual output 3W Wide Input DC/DC Converters 1 3 Watts in DIL Package 9 models including 3.3VDC output Wide input ranges 9-18V, 18-36V, 36-75V EN55022 conducted emissions level A (optional) Continuous short circuit protection Operating temperature range -25°C to +105°C Input voltage range to ETS300-132-2 UL, VDE and CSA safety approvals The BXA3 Series of DC/DC converters is designed to offer the optimum cost/benefit power solution for a wide variety of applications including public and private telecommunications, industrial systems and process and test equipment. The series consists of 9 models with input voltages of 9-18VDC, 1836VDC and 36-75VDC, and offers standard output voltages of 3.3V, 5V, 12V and 15V in single and dual output configurations. Continuous short circuit protection, overvoltage protection, 60mV output ripple and EN55022 level A conducted noise compliance minimize design-in time, cost and eliminate the need for external components. 2 YEAR WARRANTY All specifications are typical at nominal input, full load at 25°C unless otherwise stated SPECIFICATIONS OUTPUT SPECIFICATIONS Voltage accuracy Line regulation Load regulation Ripple and noise (5Hz to 20MHz) LL to HL, all outputs Full load to no load +5V output All others Temperature coefficient Over voltage protection Short circuit protection INPUT SPECIFICATIONS Input voltage range 12VDC 24VDC 48VDC Suffix ‘-F’ (See Note 5) (See Note 7) Output remains within specification 9 to 18VDC 18 to 36VDC 36 to 75VDC Pi type Yes 5V/ms Clamp diode ±1.0% ±2.5% ±2.5% 60mV pk-pk, max., 15mV rms 100mV pk-pk, max., 15mV rms ±0.02%/°C, max. 135% Vout Continuous automatic recovery EMC CHARACTERISTICS Conducted emissions EN55022, FCC part 15 Suffix ‘-F’ versions (See Notes 5 and 6) Level A GENERAL SPECIFICATIONS Efficiency Isolation voltage Switching frequency Approvals and standards Case material Material flammability Weight MTBF MIL-HDBK-217F Input/output Variable See table 500VDC 200kHz to1MHz VDE0805, EN60950, IEC950 UL1950, CSA C22.2 No. 950 Non-conductive black plastic UL94V-0 min. 15g (0.53oz) 800,000 hours Input filter Reverse voltage protection Max. input rise and fall time ENVIRONMENTAL SPECIFICATIONS Thermal performance Operating ambient -25°C to +105°C (See derating curve) Non-operating amb -40°C to +105°C Cooling Free air convection cooled Non-condensing Operating Non operating 5Hz to 500Hz 5% to 95% RH 10,000 feet max. 40,000 feet max. 2.5G rms (approx.) Relative humidity Altitude Vibration File Name: BXA3.PDF Rev: 02 Oct 2002 BXA3 Series DC/DC CONVERTERS INPUT VOLTAGE 9-18VDC 9-18VDC 18-36VDC 18-36VDC 18-36VDC 36-75VDC 36-75VDC 36-75VDC 36-75VDC OUTPUT VOLTAGE 3.3V 15.0V 3.3V 5.0V ±5.0V 3.3V 5.0V 12.0V 15.0V OUTPUT CURRENT 600mA 200mA 600mA 500mA ±250mA 600mA 500mA 250mA 200mA (1) Single and dual output 3W Wide Input DC/DC Converters 2 For the most current data and application support visit www.artesyn.com/powergroup/products.htm INPUT CURRENT 245mA 335mA 122mA 140mA 140mA 61mA 69mA 83mA 83mA (2) TYPICAL EFFICIENCY 68% 75% 68% 76% 76% 68% 76% 76% 76% REGULATION LINE (3) MODEL (4) LOAD NUMBER (5) ±2.5% ±2.5% ±2.5% ±2.5% ±2.5% ±2.5% ±2.5% ±2.5% ±2.5% ±2.5% ±2.5% ±2.5% ±2.5% ±2.5% ±2.5% ±2.5% ±2.5% ±2.5% BXA3-12S3V3 BXA3-12S15 BXA3-24S3V3 BXA3-24S05 BXA3-24D05 BXA3-48S3V3 BXA3-48S05 BXA3-48S12 BXA3-48S15 Notes 1 2 3 4 5 Maximum. Maximum figure at full load (nominal). Low line to high line. Full load to no load. An optional internal filter is available. When the filter is added, the BXA3 will meet VDE0871-A, VDE0878-A and EN55022-A. Add the suffix ‘-F’ to the model number, e.g. BXA3-12S15-F. Conducted noise filtering to EN55022 level B may be accomplished by putting the following capacitors across the input pins. 12VDC 5µF ceramic X7R dielectric type 24VDC 3µF ceramic X7R dielectric type 48VDC 1µF ceramic X7R dielectric type Reverse voltage protection can be implemented by putting a fast blow fuse on the positive input rail. Rate the fuse for 250mA at 48VDC input, 500mA at 24VDC input and 1000mA at 12VDC input. 6 7 International Safety Standard Approvals VDE0805/EN60950/IEC950 Licence No. 5856 UL1950 File No. E136005 CSA C22.2 No. 950 File No. LR41062C www.artesyn.com File Name: BXA3.PDF Rev: 02 Oct 2002 BXA3 Series DC/DC CONVERTERS PIN CONNECTIONS PIN NUMBER 2 3 22 23 9 10 11 14 15 16 SINGLE OUTPUT –Vin –Vin +Vin +Vin No Pin No Pin No Connection +Vout No Pin -Vout Single and dual output 3W Wide Input DC/DC Converters 3 For the most current data and application support visit www.artesyn.com/powergroup/products.htm DERATING CURVE DUAL OUTPUT –Vin –Vin +Vin +Vin Common No Pin -Vout +Vout No Pin Common 0W 2.5/3W Output Power (Watts) 71°C 85°C 105°C 0°C 10°C 20°C 30°C 40°C 50°C 60°C 70°C 80°C 90°C 100°C 110°C -25°C -20°C -10°C 0.12 Typ (3.0) 0.1 (2.5) 23 22 2 3 0.020 Dia. (0.5) DOT ON TOP REFERENCES PIN 2 1.25 (31.8) 0.6 (15.2) BOTTOM VIEW 0.1 (2.5) 0.1 (2.5) 0.175 (4.5) 0.1 (2.5) 16 15 14 9 10 11 0.03 (0.762) 0.60 (15.2) 0.02 (0.5) 0.50 (12.7) 0.80 (20.3) ALL DIMENSIONS IN Inches (mm) ALL PINS ARE IN TRUE POSITION WITHIN .010 DIA. @ M.M.C. TOLERANCE .XX = ± 0.02 (INCHES) .XXX = ± 0.005 Data Sheet © Artesyn Technologies® 2002 The information and specifications contained in this data sheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising from printing errors or inaccuracies. Specifications are subject to change without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein. www.artesyn.com File Name: BXA3.PDF Rev: 02 Oct 2002