CNS653-ME

ARTESYN CNS650-M SERIES 650 W AC-DC Power Supplies Advanced Energy's Artesyn CNS650-MU series of single output open-frame AC-DC power supplies are offered 12 V, 24 V, or 48 V outputs with +15% trim range. Each power supply comes with a 12 V fan output and 5 V standby. All models feature ITE and medical safety approvals and accept a universal input of 90 to 264 VAC. Depending on operating conditions, its 4'' x 6'' x 1.54'' compact and high density "U-Channel" construction delivers up to 400 W of output power with free air convection cooling and up to 650 W with 400 LFM of forced air. These power supplies are ideal for industrial systems as well as for medical applications. SPECIAL FEATURES SAFETY  Designed for forced air and natural  UL+CUL ES 60601-1 convection cooling  Medical and ITE safety approvals, 2x MOPP UL 60601-1 UL 62368-1  TÜV EN 60601-1  PMBus® interface  DEMKO EN 62368-1  Active current share with OR-ing FET  CB  Dual fused  Type BF ready  Active Power Factor Correction, 61000-3-2 compliant Total Power: 650 W Input Voltage: 90 to 264 VAC # of Outputs: Single IEC 60950-1 IEC 60601-1 IEC 62368-1  CCC GB4943.1/GB9254 GB17625.1  Built-in Class B EMI filter  CE  Less than 1U high  UKCA Mark  4" x 6" U-channel construction ** CNS650-M tested according to the medical standard IEC 60601-1-2 4th Edition. (open-frame or end-fan variants available for 12 V) AT A GLANCE LVD, RoHS  1.3 MHrs, 25 °C, 650 W forced air ORDERING INFORMATION Max. Continuous Load (Free Air) Max. Peak Load (Free Air)1 0A 54.2 A 62.5 A 0A 30.8 A 54.2 A Vout Adjust Minimum Range Load (-0% / +15%) Max. Continuous Load (Forced Air)2 Max. Peak Load (Forced Air)2 Regulation3 Ripple (p-p)4 NA NA ±2% 120 mV 54.2 A 62.5 A ±2% 120 mV 54.2 A 62.5 A ±2% 120 mV 27.1 A 31.3 A ±2% 240 mV 15.6 A ±2% 480 mV Model Number Output Voltage CNS653-ME5, 6 12 V 12 - 13.8 V CNS653-MF5 12 V 12 - 13.8 V CNS653-MU 12 V 12 - 13.8 V 0A 33.3 A 54.2 A CNS655-MU 24 V 24 - 27.6 V 0A 16.7 A 27.1 A CNS658-MU 48 V 48 - 55.2 V 0A 8.3 A 13.5 A 13.5 A 1 Peak load current not to exceed 10 seconds, Ta = 50 °C. 2 Requires at least 400 LFM of airflow. 3 At 25 °C including factory setpoint, line voltage and load current variations. 4 Peak-to-peak ripple measured at the output terminal with 20 MHz bandwidth and 10 µF (tantalum capacitor) in parallel with 0.1 µF capacitor across the output. 5 Optional suffix “-ME” (end-fan) and “-MF: (open-frame) available on the 12 V output. 6 80 PLUS certified. advancedenergy.com 3 CNS650-M INPUT CONNECTIONS (-MU AND -MF SUFFIX) Pin Function TB1 PE TB2 L2/Neutral TB3 L1/Line Power Supply Side System Side Dinkle EHK762V-03P Max Torque: 4kgf-cm Recommended Wire Size: AWG #22 to #14 INPUT CONNECTIONS (-ME SUFFIX) Pin Function Power Supply Side System Side IEC Inlet Input AC IEC 60320 C14 (Male) IEC Cord C13 (Female) Power Supply Side System Side Output Terminal Screw: M4X8 (4X) Max Torque: 10kgf-cm Molex 19099-0032 or 19141-0063 for AWG #16 to #14 Molex 19099-0048 or 19141-0083 for AWG #12 to #10 OUTPUT CONNECTIONS Pin Function BAR1 -Vout BAR2 -Vout BAR3 +Vout BAR4 +Vout 4 advancedenergy.com CNS650-M OTHER OUTPUT AND CONTROL CONNECTIONS (CONNECTOR J304) Pin Designation Description 1 5VSB +5 V Standby Output J304 20-Pin Connector (PSU Side): 2 5VSB +5 V Standby Output Landwin: 2052P20008T or 3 5VSB_GND +5 V Standby Output Return/Ground CviLux: 4 SCL Serial Clock Signal (I2C) 5 A0 EEPROM Address Recommended Mating Connectors: 6 SDA Serial Data Signal (I2C) CviLux: 7 I_SHARE Active Current Share 8 SYS_GND Return Ground for Signals and I2C 9 12VFAN 12 V Fan Output 10 REMOTE INHIBIT Output Inhibit Pin (Main Output) 11 FAN_RTN 12 V Fan Output Return/Ground 12 VIN_GOOD Input Line OK Signal 13 FAN_PWM1 FAN PWM 14 PWOK Output Power OK Signal 15 FAN_TACH1 Fan1 Tacho Signal 16 FAN_OVERRIDE External Fan Sensor for Override 17 FAN_FAIL Fain Fail Signal 18 FAN_FAULT_EN FAN Fault Enable Due to Low RPM 19 REMOTE_SENSE+ Positive Remote Sense 20 REMOTE_SENSE- Remote Sense Return CI0120P1HD0-LF CI0120SD000 (housing) CI01TD21PE0 (contact pins) Landwin: 2050S2000 (housing) 2053T021V (contact pins) JST: PHDR-20VS (housing) SPHD-001T-P0.5 (contact pins) See ACCESSORIES Section FAN OUTPUT CONNECTOR FOR -MU, -MF SUFFIX (CONNECTOR J306) Pin Function Description 1 12VFAN 12 V fan output J306 4-Pin Connector (PSU Side): 2 FAN_RTN 12 V fan return CviLux: CI0104P1HK0-LF 3 FAN_PWM1 Fan PWM Landwin: 2003P0401V 4 FAN_TACH1 Fan1 tacho signal Recommended Mating Connectors: CviLux: CI0104S0000 (housing) CviLux: CI01T01MPP0 (contact pins) Landwin: 2001S0400 (housing) Landwin: 2005T011R (contact pins) advancedenergy.com 5 CNS650-M MECHANICAL DRAWINGS (“-MU” SUFFIX FOR U-BASE CONSTRUCTION/12 V, 24 V AND 48 V) 39.2 120 30 (2X) 16.2 PEM F-M3-1 (2X) 2.5 mm max penetration depth from face of side chassis INPUT CONNECTOR DINKLE EHK762V-03P TORQUE: 4kgf-cm MAX. PE N L C40 L-0P J306 FAN CONNECTOR OUTPUT TERMINALS SCREW M4X8 (4X) TORQUE: 10kgf-cm MAX. J304 20-WAY SIGNAL CONNECTOR L1 D1 PEM F-M3-1 (2X) 120 75 (2X) PEM F-M3-1 (4X) 3.0 MM MAX PENETRATION DEPTH FROM FACE OF BOTTOM CHASSIS 26.2 100 (2X) 152.4 0.5 Thermal Hot Spot Reference Component Temperature Limit (-MU) D1 (AC bridge diode) 105 °C L1 (PFC choke) 115 °C C40 (output cap) 100 °C L-output (output choke) 125 °C Do not exceed indicated temperature limits to ensure operation is within the component thermal derating limits. Measure the component temperatures using K type thermocouples. Unit weight (-MU suffix): 800 g 6 advancedenergy.com 101.6 0.5 13.3 16.2 39.2 0.5 30 (2X) MODEL LABEL 1.9 REF VR408 TRIMPOT FOR OUTPUT ADJUSTABILITY COUNTER-CLOCKWISE: INCREASE OUTPUT VOLTAGE CNS650-M MECHANICAL DRAWINGS (“-MF” SUFFIX FOR OPEN-FRAME CONSTRUCTION/12 V ONLY) 152.4 0.5 4.5 43.9 1 RoHS LABEL PE N L INPUT CONNECTOR DINKLE EHK762V-03P TORQUE: 4kgf-cm MAX. C40 88.3 88.8 L-0P 96.8 0.5 12.7 1 1.9 REF 141.9 OUTPUT TERMINALS SCREW M4X8 (4X) TORQUE: 10kgf-cm MAX. J304 20-WAY SIGNAL CONNECTOR D1 4.5 143.4 4X M3 MOUNTING HOLE J306 FAN CONNECTOR 2.5 REF MODEL LABEL VR408 TRIMPOT FOR OUTPUT ADJUSTABILITY COUNTER-CLOCKWISE: INCREASE OUTPUT VOLTAGE 34.1 0.5 0.5 REF 4 L1 Thermal Hot Spot Reference Component Temperature Limit (-MF) D1 (AC bridge diode) 120 °C L1 (PFC choke) 120°C C40 (output cap) 100 °C L-output (output choke) 125 °C Do not exceed indicated temperature limits to ensure operation is within the component thermal derating limits. Measure the component temperatures using K type thermocouples. Unit weight (-MF suffix): 650 g advancedenergy.com 7 CNS650-M (2X) 30 MECHANICAL DRAWINGS (“-ME” SUFFIX FOR END-FAN CONSTRUCTION/12 V ONLY) PEM F-M3-1 (2X) 120 4.8 REF 177.8 0.5 152.4 OUTPUT TERMINALS SCREW M4X8 (4X) TORQUE: 10kgf-cm MAX. 101.6 0.5 55.8 AC INLET 16.2 20 120 J304 20-WAY SIGNAL CONNECTOR 16.2 1.9 REF PEM F-M3-1 (2X) (2X) 75 13.3 PEM F-M3-1 (4X) (2X) 100 8 advancedenergy.com 26.2 40 0.5 (2X) 30 MODEL LABEL VR408 TRIMPOT FOR OUTPUT ADJUSTABILITY COUNTER-CLOCKWISE: INCREASE OUTPUT VOLTAGE CNS650-M PERFORMANCE CURVES Output Power VS. Input Line Output Power Derating 700 700 600 500 Output Power [Watts] Output Power [Watts] 600 400 300 Convection (MF) Convection (MU) 400 LFM (MF/MU) 200 LFM (MF/MU) ME (End Fan) 200 100 500 400 300 Convection (MF) Convection (MU) 400 LFM (MF/MU) 200 LFM (MF/MU) ME (End Fan) 200 100 0 0 0 10 20 30 40 50 60 70 80 90 90 110 130 150 Figure 1. Output Power vs. Ambient Temperature at Natural Convection and Forced Air Cooling 190 210 230 250 270 Figure 2. Output Power vs. Input Line at Natural Convection and Forced Air Cooling CNS655‐Mx (24V) Efficiency Curve CNS653‐Mx (12V) Efficiency Curve 96% 96% 95% 95% 94% 94% Efficiency (%) Efficiency (%) 170 AC Input Line [Vac] Ambient Temperature [°C] 93% 92% 93% 92% 91% 91% 115 VAC 115 VAC 90% 90% 230 VAC 230 VAC 89% 89% 0 0.2 0.4 0.6 0.8 0 1 0.2 0.4 Figure 3. Typical Efficiency for 12 V Output 0.6 0.8 1 Output Load (% of 650W) Output Load (% of 650W) Figure 4. Typical Efficiency for 24 V Output CNS658‐Mx (48V) Efficiency Curve Estimated Service Life vs. Component Temp 96% 150 95% Efficiency (%) Esimated Life 100 93% 75 92% 50 91% 25 115 VAC 90% 0 230 VAC 110 89% 0 0.2 0.4 0.6 0.8 Lifetime [KHrs] 125 94% 1 105 100 95 90 85 80 75 C40 Temperature [°C] Output Load (% of 650W) Figure 5. Typical Efficiency for 48 V Output Figure 6. Estimated Product Useful Life Based on C40 Case Temperature CNS653-ME Fan Noise vs. Load 60 50 SPL dB(A) 40 30 20 10 0 0 0.2 0.4 0.6 0.8 1 LOAD Figure 7. CNS653-ME (End Fan) Typical Audible Noise Level vs. Output Load at 90 VAC, ~30 °C Ambient. advancedenergy.com 9 CNS650-M ACCESSORIES Orderable Part Number Description 73-788-001 J304 (20 Pin) Mating Connector with 0.3 m wires attached Description PIN 20 PIN 19 PIN 2 PIN 3 PIN 1 300 ± 5 mm CNS-BBAR-KIT 73-769-002 10 advancedenergy.com Output Bussbar Extension Kit for Vertical Wire Interface USB to I2C Adaptor for PMBus Communication ABOUT ADVANCED ENERGY Advanced Energy (AE) has devoted more than three decades to perfecting power for its global customers. AE designs and manufactures highly engineered, precision power conversion, measurement and control solutions for mission-critical applications and processes. Our products enable customer innovation in complex applications for a wide range of industries including semiconductor equipment, industrial, manufacturing, telecommunications, data center computing, and medical. With deep applications know-how and responsive service and support across the globe, we build collaborative partnerships to meet rapid technological developments, propel growth for our customers, and innovate the future of power. For international contact information, visit advancedenergy.com. powersales@aei.com (Sales Support) productsupport.ep@aei.com (Technical Support) +1 888 412 7832 Specifications are subject to change without notice. Not responsible for errors or omissions. ©2022 Advanced Energy Industries, Inc. All rights reserved. Advanced Energy®, AE® and Artesyn™ are U.S. trademarks of Advanced Energy Industries, Inc. ENG-CNS650-M-235-01 4.20