DS2500PE-3

Embedded Power for Business-Critical Continuity Rev. 12.17.13 DS2500PE-3 1 of 9 DS2500PE 180 Vac to 264 Vac 2500 W Distributed Power Bulk Front-end Single Ouptut Standard Total Output Power: 2500 W continuous Special Features • 2500 W output power • High-power and narrow form factor • 1U form factor • High-density design: 23.3 W/in3 • Active Power Factor Correction • EN61000-3-2 harmonic compliance • Inrush current control • 80plus platinum efficiency • N+1 or N+N Redundant • Hot-pluggable • Active current sharing • PMBus compliant • Compatible with Emerson’s universal PMBus GUI • Two-year warranty Electrical Specifications Input Input voltage range: 180 to 264 Vac Frequency: 47 Hz to 63 Hz Efficiency: Max input current: 94.0% peak 15.6 Arms Inrush current: 55 Apk Conducted EMI: Class A Radiated EMI: Class A Power factor: >0.97, typical ITHD: 10% Leakage current: 0.75 mA Hold-up time: 12ms Compliance • Class A +6dB margin Conducted/ Radiated EMI • EN61000-4-11 Safety Ordering Information • UL/cUL 60950 • DEMKO+ CB Report EN60950 • CE Mark • BSMI DS2500PE-3 Main Output Standby Output 12V 3.3VSB @ 2.7A Airflow Direction Forward (output to handle) Embedded Power for Business-Critical Continuity Rev. 12.17.13 DS2500PE-3 2 of 9 Electrical Specifications Outputs Main DC Output MIN NOM MAX Nominal setting: -0.20% 12 0.20% Total output regulation range: 11.4 V 12.6 V Dynamic load regulation range: 11.4 V 12.6 V Output ripple: 120 mVp-p 2A5 Output current: Current sharing: 208 A Within +/-10% of full load rating Capacitive loading: 100 uF 25000 uF Start-up from AC to output: Output rise time: 3000 ms 5 ms 100 ms Standby DC Output Output setpoint range: -1% Total output regulation range: Dynamic load regulation range1: 3.3 V 1% 3.135 V 3.465 V 3.135 V 3.465 V Output ripple: 50 mVp-p Output current: 0.5 A Current sharing: Capacitive loading: 2.7 A N/A 47 uF 560 uF Start-up from AC to output: Output rise time: 2500 ms 5 ms 100 ms Protections Main Output MIN Over-current protection2: Over-voltage protection3: Under-voltage protection3: NOM MAX 270 300 13.4 V 15.0 V 9.0 V 10.0 V Over-temperature protection: Yes Fan fault protection: Yes Standby Output Over-current protection4: 145% 180% protection3: 3.8 V 4.3 V Over-voltage 1 Dyanmic load limits will apply for 100A step load at 0.5A/us 2 Unit will not shutdown if the overcurrent is less than 270A and last only for